summaryrefslogtreecommitdiff
path: root/src/test/Makefile
Commit message (Collapse)AuthorAge
* altos: Add Kalman filter to MicroPeakKeith Packard2013-01-16
| | | | | | | | This filters altitudes more accurately and also allows tracking of acceleration, which is used to discard height data generated by ejection charge noise Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add test scaffolding for APRSKeith Packard2012-12-05
| | | | | | | | This moves some test code out of ao_aprs.c and into ao_aprs_test.c, and then adds Makefile fragments to compile and run the resulting program, creating a wav file as output Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make skytraq reflashing code try both 9600 and 4800 baudKeith Packard2012-11-30
| | | | | | | This lets it communicate with the ROM code which boots at 4800 baud instead of 9600 baud. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/test: Display MPU6000 values in ao_flight_test_mm outputKeith Packard2012-10-13
| | | | | | No computation yet, just making the values visible in the output Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/test: Add ao_flight_test_mmKeith Packard2012-10-13
| | | | | | This reads mega metrum eeprom files and runs the flight code over it Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Have 'make clean' remove all programs, even old onesKeith Packard2012-07-11
| | | | | | | This makes sure that changing version numbers doesn't leave old compiled output lying around. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Rename *_mm.c back to *.cKeith Packard2012-07-10
| | | | | | Was just a temporary hack to keep cc1111 products building during MM development. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: rename ao_viterbi.c to ao_fec_rx.cKeith Packard2012-06-26
| | | | | | Keep it parallel with ao_fec_tx.c Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: improve FEC apis to reduce data copyingKeith Packard2012-06-23
| | | | | | | | | Integrate interleaving and whitening into encode and decode steps. Add CRC checking function for receive. Make ao_fec_test program round-trip the data and verify correctness. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make ao_fec_tx_test build cleanly with -WallKeith Packard2012-06-23
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add the simplest possible viterbi decoderKeith Packard2012-06-22
| | | | | | | I think I understand how it works now. It's not exactly speedy, and it uses a lot of memory. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Software implemenation of CC1111 radio encodingKeith Packard2012-06-17
| | | | | | | Add CRC, whitening, FEC and interleaving routines for transmission path to allow cc1120 to send telem packets to cc1111. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make telescience-v0.1 build with new ao_data structKeith Packard2012-05-27
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add conversion between Pa and metersKeith Packard2012-05-18
| | | | | | To be used with the MS5607 which generates data in calibrated units. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Improve TM v1.0 apogee estimateKeith Packard2011-10-08
| | | | | | | | | | | | | | | | | | | | | v1.0 boards have noisy accelerometer data caused by interactions between RF transmission and the accelerometer measurements; this noise generates a negative bias in the accelerometer readings. The net effect is that the estimated speed is lower than the actual speed, causing early an apogee estimate. By increasing the sigma value for accelerometer data, the kalman filter 'trusts' the acceleration data less, putting more weight on the barometer data. This causes the estimated time of apogee to be closer to the correct value. This reduces the response to changes in acceleration. This new value is applied solely to TeleMetrum v1.0 boards. v1.1 boards correct for this error, and hence can use the correct sigma value for the accelerometer. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Restructure altos build to prepare for multi-arch supportKeith Packard2011-08-25
| | | | | | | | | | | | | | Split out sources into separate directories: core: architecture and product independent bits cc1111: cc1111-specific code drivers: architecture independent drivers product: product-specific sources and Makefile fragments util: scripts for building stuff This should have no effect on the built products, but testing is encouraged Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Reflect ao_flight split in ao_flight_test dependenciesKeith Packard2011-03-31
| | | | | | Need to rebuild ao_flight_test when any of the flight sources change Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch telemetrum over to kalman filterKeith Packard2011-03-22
| | | | | | | | | | | | This changes the full telemetry stream to include kalman data instead of the old ad-hoc flight data. It's compatible in that the packet sizes are the same so teledongle can receive either and figure out which it has received. A few plotting and testing tools are added to make validating the new code easier. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/test: Add baro-only flight test programKeith Packard2011-03-16
| | | | | | This builds the flight code in baro-only mode for testing. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/test: Add dependencies in the Makefile for ao_flight_testKeith Packard2011-02-18
| | | | | | | Yes, it would be nice to automate dependency generation here, but I can't be bothered. Signed-off-by: Keith Packard <keithp@keithp.com>
* Change altos build process to support per-product compile-time changesKeith Packard2010-02-20
This creates per-product subdirectories and recompiles everything for each product, allowing per-product compile-time changes for things like peripheral pin assignments and attached serial devices. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-27 12:53:06 +0000