mjb/altos - AltOS - the operating system for Altus Metrum products

	Commit message (Collapse)	Author	Age
...
*	altos: Fetch/store only 8 bits for pyro state values	Keith Packard	2014-06-02
\| \| \| \| \| \| \|	These fields are uint8_t, not int16_t. Fetching and storing 16 bits is a bad idea. Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Maximum pyro configuration parameter has 4 bytes in the name	Keith Packard	2014-06-02
\| \| \| \| \| \| \| \|	"f>=" needs four bytes, not just three to store the whole string. If we only store three, then we never manage to compare correctly as the null terminating byte is missing. Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Configuring pyro channels can use more than 48 characters	Keith Packard	2014-06-02
\| \| \| \| \| \| \|	Increase the command buffer from 48 to 128 bytes to hold the longest pyro configuration commands Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Allow sparse GPS data logging for TeleGPS	Keith Packard	2014-05-30
\| \| \| \| \| \| \|	When the device hasn't moved for a while, stop logging data. Start as soon as it moves again. Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Fake flight code changes in kernel and stm	Keith Packard	2014-05-27
\| \| \| \| \| \| \|	Redirects data input from local sensors to USB sourced data, leaving USB enabled when the computer goes into pad mode. Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Move ao_config declarations to ao_config.h	Keith Packard	2014-05-25
\| \| \| \| \| \|	No sense leaving these in ao.h, and it's nice to make that file smaller Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Add config values for tracker start motion limits	Keith Packard	2014-05-21
\| \| \| \| \| \| \| \|	TeleGPS switches from 'pad' to 'drogue' states after the device moves a specified distance from the initial starting point. These values can be configured, and this is the configuration for them. Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Don't define ao_ignite_decivolt without igniters	Keith Packard	2014-05-21
\| \| \| \|	Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Expose ao_gps_set_rate from u-blox driver	Keith Packard	2014-05-21
\| \| \| \| \| \|	This lets applications set the desired GPS update rate to reduce power usage Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: stm and lpc ao_boot.h were identical. move to kernel.	Keith Packard	2014-05-15
\| \| \| \| \| \| \|	These two files were absolutely identical, so share them by moving under kernel instead.x Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Report amount of program space available in the version command	Keith Packard	2014-05-12
\| \| \| \|	Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Fix byte offsets in the mega AO_LOG_FLIGHT packets	Keith Packard	2014-05-08
\| \| \| \| \| \|	Just comments, but even those should be correct Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: 8051 64 * 16 multiply function was broken for negative 64-bit	Keith Packard	2014-05-08
\| \| \| \| \| \|	It was jumping around the actual multiply when the 64-bit argument was negative. Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Add configurable beep tone	Keith Packard	2014-05-02
\| \| \| \| \| \| \| \| \| \|	This lets you directly set the mid-range beep tone; the high and low tones remain set off of that in the same ratio as before. Note that none of the cc1111 products get this feature as they don't have enough flash space anymore... Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Switch beeping to farnsworth spacing	Keith Packard	2014-04-12
\| \| \| \| \| \| \|	Use 17wpm/12wpm farnsworth spacing for the state reports. Leave the numeric reports running slowly as those require counting. Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Report battery voltage instead of S at startup	Keith Packard	2014-04-05
\| \| \| \| \| \| \|	This works on everything with a beeper except TeleMetrum v1.0 which just doesn't have enough flash space for the code. Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos: Rename 'core' to 'kernel'	Keith Packard	2014-04-05
	core remains a bad name to use -- dirvish skips files (and directories, it seems) with that name. Signed-off-by: Keith Packard <keithp@keithp.com>