summaryrefslogtreecommitdiff
path: root/src/kernel/ao.h
Commit message (Collapse)AuthorAge
* altos/stmf0: Re-implement fast ADC code for stmf0Keith Packard2015-01-27
| | | | | | | This creates a ring buffer for ADC data so that ADC fetching can run in parallel with other activities. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use other TeleDongle LED for CRC-invalid packet reportingKeith Packard2014-11-06
| | | | | | | Instead of blinking out some fake-o RSSI indication, just blink the red LED when a packet with a bad CRC is received. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Declare port register type only in arch headerKeith Packard2014-11-06
| | | | | | | Instead of defaulting to 8 bits, explicitly require declaration of the type of the port register for each architecture. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Remove old AO_SEND_ALL_BARO bitsKeith Packard2014-10-25
| | | | | | | This was used for testing the original TeleMini which couldn't log data at full speed. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use 32-bits for flight state data (alt/speed/accel)Keith Packard2014-07-10
| | | | | | | Stores 32-bits for all of the flight parameters. Uses 64-bit intermediates for kalman computation. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Rework packet receive for cc1120Keith Packard2014-07-05
| | | | | | | | | | Instead of blocking on PQT, just set up the receiver to start going and when the first bit interrupt comes in, grab the SPI bus if possible and configure it for reception. This improves sensitivity in the radio by a significant amount while making the code conceptually a bit nicer. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Call ao_telemetry_reset_interval when telemetry rate changesKeith Packard2014-07-05
| | | | | | | This lets the radio code adjust the telemetry packet sending pattern when the data rate changes. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add defines for 2400 and 9600 baud telemetry ratesKeith Packard2014-07-05
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use TeleMetrum v1.9 board for MegaDongle experimentsKeith Packard2014-07-05
| | | | | | | This configures the MegaDongle v0.1 directory to use the pin assignments in TeleMetrum v1.9 boards. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: ao_rssi subsystem needs to use AO_LED_TYPE instead of uint8_tKeith Packard2014-07-05
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Move ao_config declarations to ao_config.hKeith Packard2014-05-25
| | | | | | No sense leaving these in ao.h, and it's nice to make that file smaller Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add config values for tracker start motion limitsKeith Packard2014-05-21
| | | | | | | | TeleGPS switches from 'pad' to 'drogue' states after the device moves a specified distance from the initial starting point. These values can be configured, and this is the configuration for them. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Expose ao_gps_set_rate from u-blox driverKeith Packard2014-05-21
| | | | | | This lets applications set the desired GPS update rate to reduce power usage Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add configurable beep toneKeith Packard2014-05-02
| | | | | | | | | | This lets you directly set the mid-range beep tone; the high and low tones remain set off of that in the same ratio as before. Note that none of the cc1111 products get this feature as they don't have enough flash space anymore... Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Rename 'core' to 'kernel'Keith Packard2014-04-05
core remains a bad name to use -- dirvish skips files (and directories, it seems) with that name. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-20 05:53:05 +0000