| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
| |
The pad number was getting reset back to one when signal was lost,
causing pad one to get fired in this case even when already set to arm mode.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
| |
Enter/leave drag race is done by rotating the box selector knob
to a new 'dr' position and then holding down the firing button; this
avoids a potential accidental firing if you somehow don't realize
you've armed the box before selecting drag race mode.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the unit disarmed, press and hold the fire button for five
seconds to enable drag race mode.
The display will show 'dr' for five seconds and beep five times to
indicate that drag race mode is enabled. The decimal points in the
display will all be displayed as an additional visual aid. Once every
five seconds, it will beep.
With drag race mode enabled, you can select a box/pad pair and press
the 'fire' button to add it to the drag race group. For the current
box, all members of the drag race group will have their continuity
LEDs blink slowly. There will be no indication of continuity in this
mode; you'll want to check that before enabling drag race mode. If you
want to de-select a member of the group, just press the fire button
again. Each time you push the fire button, it will beep out the pad
number added or removed.
Arm the box and you will not be able to add or remove members from the
drag race group. Firing will simultaneously fire all members of the
drag race group.
To disable drag race mode, press and hold the fire button for two
seconds. It will beep twice and turn off the decimal points in the display.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
This makes the lco management code support arming multiple pads and
firing all of them at once. The UI code does not expose this yet.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
| |
Turn left past '1' and see the firing box battery voltage instead of
pushing the firing button with the box disarmed. This seems like a
safer UI.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
When the firing button is pressed while unarmed, show the telefire
battery voltage in the display.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
|
Signed-off-by: Keith Packard <keithp@keithp.com>
|
