summaryrefslogtreecommitdiff
path: root/src/drivers/ao_cc1120.c
Commit message (Collapse)AuthorAge
* altos: Switch drivers to ao_arch_block/release_interruptsKeith Packard2012-10-25
| | | | | | Stop using cli/sei, which are avr-specific Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: profiling on STM32LKeith Packard2012-10-25
| | | | | | Add sample-based profiling, using a 1kHz timer Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add custom panic noise for self-test failuresKeith Packard2012-08-31
| | | | | | Make it easier to tell which component is failing self test Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Clean up radio APIsKeith Packard2012-08-27
| | | | | | | Move api to ao_radio_cmac.h include file. Expose ao_radio_test as standard API. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Place STM config values at fixed addresses for re-useKeith Packard2012-07-17
| | | | | | | | Just like cc1111, stick the serial number and radio calibration values at known fixed addresses so that when re-flashing the board, we can go find the existing values. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Create macros to convert from/to radio RSSI representationKeith Packard2012-07-11
| | | | | | | | AO_RSSI_FROM_RADIO and AO_RADIO_FROM_RSSI. Removes a bunch of open-coded versions of the same function. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Signal continuity over radio in pad mode (trac #40)Keith Packard2012-07-10
| | | | | | | This is especially useful for telemini which has no beeper, allowing you to hear the continuity signal while at the pad over the air. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make profiling Viterbi decoder more usefulKeith Packard2012-06-27
| | | | | | | This blocks starting the decoder until all of the data have arrived so that the time spent in the decoder is easily computed. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Clean up radio CRC handlingKeith Packard2012-06-27
| | | | | | | Make the FEC code just set the CRC_OK bit like the cc1111 radio does; eliminates a bunch of weird conventions across the FEC API. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: include targe SPI speed in get requestKeith Packard2012-06-27
| | | | | | | STM needs it to be provided when enabling the SPI device, so just fix AVR and cc1111 to do the same. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Clean up cc1120 driver a bitKeith Packard2012-06-27
| | | | | | Make some variables static, remove stale debug code Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Optimize FEC encode and decodeKeith Packard2012-06-26
| | | | | | | | | | | | | Integrate interleaving, CRC and padding within the decode/encode functions. Provide for ISR priorities so that the 1120 RX interrupt takes precedence over the other interrupts or we risk losing bits. Optimize the viterbi decoder a bit (goes from 10ms per packet to 7ms per packet). Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Incremental viterbi decodeKeith Packard2012-06-25
| | | | | | | | Decode radio input one interleave block at a time. This overlaps the decode computation with the packet reception, leading to lower latency in an attempt to keep up with the transmitter. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: decode cc1120 received packetsKeith Packard2012-06-25
| | | | | | Call the fec decode function, compute RSSI and check CRC Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Get cc1120 packet reception workingKeith Packard2012-06-25
| | | | | | Interrupt-per-bit, but it seems to work Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: make cc1120 ao_radio_send re-entrantKeith Packard2012-06-17
| | | | | | It gets called from multiple tasks, so put local data on the stack. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Software implemenation of CC1111 radio encodingKeith Packard2012-06-17
| | | | | | | Add CRC, whitening, FEC and interleaving routines for transmission path to allow cc1120 to send telem packets to cc1111. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Use interrupts to wake up after RDF transmission.Keith Packard2012-06-17
| | | | | | Also clean up the debug output Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Start making cc1120 radio workKeith Packard2012-06-15
| | | | | | RDF tones and radio calibration work now. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Fix cc1120 packet mode datarate and configKeith Packard2012-06-15
| | | | | | Was using the wrong function Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make sure cc1120 is initialized correctly at startup timeKeith Packard2012-06-15
| | | | | | Check to make sure it pulls down MISO when CS is enabled. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: use 'b' command for radio beepKeith Packard2012-06-15
| | | | | | 'B' is used by the baro data dumper. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Fix RDF mode data rate and PKT_CFG0 valueKeith Packard2012-06-15
| | | | | | | Changes tone to the desired 1kHz frequency and ensures the PKT_CFG0 has the right value. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Actually write cc1120 register valuesKeith Packard2012-06-15
| | | | | | Helps to not use 'read' mode when writing. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Configure cc1120 frequencyKeith Packard2012-06-15
| | | | | | | Set default conversion value, and pull the selected frequency calibration data out of the config block. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Hacking at cc1120 driverKeith Packard2012-05-07
| | | | | | Still doesn't work, but this adds a ton more register definitions Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Starting to write cc1120 driverKeith Packard2012-04-17
| | | | | | | This does "something" in radio test mode, appearing to generate a 730MHz signal. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add stub cc1120 driverKeith Packard2012-03-31
Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-17 18:45:31 +0000