summaryrefslogtreecommitdiff
path: root/src/core/ao_config.c
Commit message (Collapse)AuthorAge
* altos: Make APRS interval configurableKeith Packard2012-12-07
| | | | | | | This provides a separate configuration value for APRS, allowing the interval between APRS reports to vary. Signed-off-by: Keith Packard <keithp@keithp.com>
* Merge branch 'master' into aprsKeith Packard2012-12-07
|\
| * altos: Change 'flight-number' to 'current-flight'Keith Packard2012-12-06
| | | | | | | | | | | | Avoids ambiguity with stored flight info, which starts lines with 'flight'. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altos: Allow telemetry, rdf and APRS to be individually controlledKeith Packard2012-12-06
|/ | | | | | | But, only when APRS is available so that TeleMetrum and TeleMini don't change behaviour Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make Tm recovery mode set RF cal and callsign tooKeith Packard2012-11-18
| | | | | | | This lets us connect to Tm even if someone messes up the RF calibration or callsign info Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Compute desired frequency when upgrading from pre-1.1Keith Packard2012-10-08
| | | | | | | Instead of just smashing the frequency to 434.550, compute the frequency from the old radio channel value Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Note changes to configured AES key for SPI radio convenienceKeith Packard2012-08-29
| | | | | | | Keep a sequence number to mark when the AES key is changed so that the radio code can avoid sending the key before every CMAC radio operation. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add telefire-v0.1Keith Packard2012-07-29
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Remove unused 'func' from ao_config_setKeith Packard2012-07-16
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add arbitrary pyro channel supportKeith Packard2012-07-14
| | | | | | | Programmed by specifying a conjunction of flight conditions that trigger the igniter to fire. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Force 434.550Mhz by connecting debug gnd and clk (trac #41)Keith Packard2012-07-10
| | | | | | | | Check for pin P2_2 low at startup and set the frequency to 434.550MHz. This value won't get written to flash, so rebooting again will restore the configured frequency. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Save some memory.Keith Packard2012-07-10
| | | | | | | A few minor space savings in ao_cmd.c and ao_config.c. Don't build unused conversion functions ao_altitude_to_pres and ao_temp_to_dC Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make sure ao_storage_config is set before reading config blockKeith Packard2012-06-17
| | | | | | | | ao_storage_read does in fact call ao_storage_setup, but we need the value of ao_storage_config *before* calling ao_storage_read, so call ao_storage_setup first. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: ao_storage_read already calls ao_storage_setupKeith Packard2012-06-17
| | | | | | No need to call twice. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Remove debug printf from accel auto-calKeith Packard2012-05-28
| | | | | | Otherwise, this goes way too slow Signed-off-by: Keith Packard <keithp@keithp.com>
* Get megametrum ready to at least log flight dataKeith Packard2012-05-25
| | | | | | Doesn't track flight state changes correctly. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Start adding apogee lockout supportKeith Packard2012-04-14
| | | | | | Remove radio channel support too. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make ao_config_set_radio publicKeith Packard2012-04-07
| | | | | | Allows other bits of code to reset the radio parameters. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Force radio channel to zero when setting frequencyKeith Packard2012-04-07
| | | | | | | Otherwise, the actual radio frequency will include the channel offset, which is not useful. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Save memory in ao_config.cKeith Packard2012-04-07
| | | | | | | Shorten help messages. Stop setting aes_key on products not using aes key. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make sure config values are loaded in 'c s' commandKeith Packard2012-03-28
| | | | | | | | ao_config_get may not have been called when ao_config_show is invoked by the user, so make sure the config values are loaded before showing uninitialized data. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Reset config version if it's too large as wellKeith Packard2012-03-27
| | | | | | | | Any future config values will get trashed if we down grade the firmware, so we must reset the firmware version whenever it gets written. Signed-off-by: Keith Packard <keithp@keithp.com>
* Do radio settings solely by frequencyKeith Packard2012-03-26
| | | | | | | Compute the radio setting needed based on the calibration value provided and the requested frequency. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add configurable set of channels for TTKeith Packard2011-11-12
| | | | | | | This adds the channel list for TT, which will be configured by AltosUI. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Set default flight log max to 127k on TM v0.1Keith Packard2011-11-12
| | | | | | The flash part on v0.1 boards is only 128kB. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Make ao_xmem funcs require __xdata void * instead of castingKeith Packard2011-11-11
| | | | | | | | | | | | Having an explicit cast in the ao_xmem wrapper macros caused the compiler to generate garbage values for pdata addresses, making the upper byte 0x00 instead of the required 0xf0. Removing the casts from the ao_xmem macros exposed this problem, so a new PDATA_TO_XDATA macros was added, along with a CODE_TO_XDATA macro which serve to cast pointers, with suitable address modifications, so that things work again. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Write xdata versions of memory functions1.0.9.1Keith Packard2011-10-07
| | | | | | | | | | | | | | | | These are significantly smaller than the general pointer versions from libc on the cc1111. Signed-off-by: Keith Packard <keithp@keithp.com> Conflicts: src/Makefile.proto src/cc1111/ao_adc.c src/cc1111/ao_packet_master.c src/core/ao.h Fix up the new makefiles
* altos: Add HAS_LOG for products that log to eepromKeith Packard2011-08-27
| | | | | | Some products have eeprom for config, but none for logging (like telelaunch) Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Finish up primitive telelaunch protocolKeith Packard2011-08-27
| | | | | | | | This adds two commands to teledongle, one to query and one to actually fire the igniter. These will (eventually) want to be replaced with something nicer. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Implement remote launch protocolKeith Packard2011-08-27
| | | | | | | | Uses the radio_cmac module to provide secure communication. Keeps igniter closed for 500ms. Provides remote status for arming and ignition. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Start telelaunch productKeith Packard2011-08-27
| | | | | | Looks a lot like TM, but without the flight code. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Restructure altos build to prepare for multi-arch supportKeith Packard2011-08-25
Split out sources into separate directories: core: architecture and product independent bits cc1111: cc1111-specific code drivers: architecture independent drivers product: product-specific sources and Makefile fragments util: scripts for building stuff This should have no effect on the built products, but testing is encouraged Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-02-08 18:59:16 +0000