| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split out sources into separate directories:
core: architecture and product independent bits
cc1111: cc1111-specific code
drivers: architecture independent drivers
product: product-specific sources and Makefile fragments
util: scripts for building stuff
This should have no effect on the built products, but testing is encouraged
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
This turns off the telemetry system so that it never transmits telemetry
or RDF tones. In idle mode, it will still accept packet mode connections.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
commit 52ac83fedbfd380d14d4df2e79992bbdfba3552a added coded to check
for a full flight log and complain with a special tone.
It also reported flight 0 over telemetry, and that part of the patch
got lost when moving to the new telemetry format. This patch
resurrects that piece.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
This sends current flight state information and retrieves companion
data to include in telemetry.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
| |
TeleMini production boards are firmware compatible with the v0.1
design, so instead of creating another product, just rename the
existing one.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
| |
To avoid over-committing the radio link, we want to send only
one low rate packet after each sensor packet. However, the
initializations for this were incorrect, causing the configuration and
location packets to be sent at the same time.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
| |
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
| |
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
| |
Apogee delay added. flight_log_max changed to two bytes (in kB now).
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This involved rewriting the GPS code to use the telemetry structures
directly so that a memcpy could be used to transfer the data to the
telemetry packets, saving a bunch of code space, along with fixing up
the gps testing programs to deal with the structure changes.
In addition, the teledongle code needed to have the monitoring code
split into separate radio receiver and USB writer threads as the
packets are now back-to-back, and hence come too fast to wait for the
USB data to be sent to the host after each one.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
This sends every packet every time, which isn't correct, but should be
useful for testing.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
This makes room to create a new multi-packet telemetry format without
changing anything yet.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This changes the full telemetry stream to include kalman data instead
of the old ad-hoc flight data. It's compatible in that the packet
sizes are the same so teledongle can receive either and figure out
which it has received.
A few plotting and testing tools are added to make validating the new
code easier.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of using a delay between telemetry packets, use a telemetry
period and compute an appropriate delay each time. This requires
changing the ascent telemetry from a 50ms delay to a 100ms interval,
to provide a regular 10 packets-per-second rate. Before, we counted on
the telemetry packet taking about 50ms to send so that we would
receive about 10 per second.
This also eliminates delays during descent for RDF tones -- those will
get transmitted in the interval between telemetry packets without
interrupting the spacing of those packets.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
Not all boards will have these, so fix places that use them to deal
with that.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
| |
What a terrible mistake! The flight computer serial numbers were
recorded in only 8 bits, so serial numbers > 255 would get truncated.
There's really no fix other than bumping the field to 16 bits and
reflashing every TM and TD on the planet. Very unfortunate.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
Reports special tone along with the continuity checks.
Reports flight 0 in telemetry.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of aborting the DMA and radio operation and expecting that to
be handled reasonably by the radio receiving task, rewrite things so
that the abort function just wakes the receiving task while that
terminates the DMA and cleans up the radio.
This eliminates all kinds of nasty bugs dealing with radio abort
smashing the radio registers at the wrong time, or interrupting a
radio transmission.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
| |
This makes it easier to tie the telemetry and eeprom files together as
they're now both labeled with serial and flight numbers, which should
be unique.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
This allows the ground station to convert the accelerometer sensor
values into acceleration and speed data. This requires a new telemetry
data structure, and so TeleMetrum and TeleDongle units must be updated
synchronously. ao-view will parse either telemetry stream, and the
serial format from TeleDongle now has a version number to allow for
future changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
It's pretty much impossible to RDF the rocket during flight, and it
interferes with the telemetry data stream. Leave it enabled on the pad
so that radios can be tested, and then re-enable it once the rocket
has landed.
This patch also turns the rdf 'on' time into a parameter so it can be
changed, and then sets that parameter to 500ms, once every 5 seconds.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
| |
Tracking the rocket on the ground may be easier using tones than using
the digital data stream, so we'll try that and see what we think.
This reverts commit 3a3bfd471a868d546d83cdc431b53c8f5208edb9.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
| |
SiRF message #4 includes signal strength and GPS engine state for each
of the satellites being tracked. This data is now parsed and sent to
eeprom and the radio.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
|
Signed-off-by: Keith Packard <keithp@keithp.com>
|
