| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
| |
Switch to using { func, "X args\0Desc" } to specify command, saving
a char field by looking at help[0] instead, and reduce help length by
doing alignment with printf instead of hardcoded spaces.
|
| |
|
|
|
|
|
| |
This reverts commit b080e933a65d268aaaec8cfd5f617a13d5babc43.
10Hz data isn't any better than 1Hz data; it still doesn't like going
upwards rapidly.
|
| |
|
|
|
| |
Send commands to skytraq to update baud rate to 57,600 bps, and
set NMEA output rate to 10Hz.
|
| |
|
|
|
| |
Added macros to make correctly constructing skytraq commands easier.
Simplified code path for NMEA processing marginally.
|
| |
|
|
|
| |
Splitting this into several smaller functions appears to make SDCC
generate better code.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Missing GPS serial data could cause the tracking array reset to
get skipped, causing the array to be overrun, smashing critical data
beyond the array.
This was detected using the 'altosui' flash command to program a
device from TM. Hitting the USB that hard caused TM to crash with a
mutex error (3 beeps) after the ao_gps_task structure was overwritten
with zeros.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
| |
Having the GPS state information can help with GPS debugging.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
| |
This wakes up the two GPS reporting tasks and gets them to report out
any existing GPS data to the log file. To make sure the timestamps in
that GPS data are accurate, this also records GPS time on receipt of
the GPS data instead of when that is logged.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| | |
|
| |
|
|
|
|
|
| |
This just dumps out the data in a very simple format to verify the GPS
receiver.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| | |
|
| |
|
|
|
|
|
|
| |
The hdop data was getting dropped on the floor, but is rather useful
when deciding if the GPS position is crazy or not. This reports HDOP *
5 (giving a useful range of .2-50).
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
| |
With the switch to the skytraq GPS unit, we don't have the same level
of detail in the GPS stream, so stop reporting that in the telemetry
stream, in the UI and writing it to eeprom.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
Pull the date out of the GPS stream and send it over the telemetry
link and write it to the eeprom.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| | |
|
|
|
This is a build-time option selected by hacking the Makefile at present.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
