| Commit message (Collapse) | Author | Age |
|---|
| | |
|
| |
|
|
|
|
|
|
|
|
|
| |
Current config variables:
Main deploy altitude above launch (in meters)
Acceleration zero g calibration (manual or automatic)
Radio channel (freq = 435.550MHz + channel * 100kHz)
Callsign (max 8 characters)
Supporting this involved shuffling code around so that the
non-telemetrum builds could include only the stuff they needed.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
| |
This now correctly sequences through the flight data collected from the
first TeleMetrum test flight.
This also completes up the flight algorithm test harness (ao_flight_test),
which runs the flight algorithm on the Linux host from a captured data log.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
| |
The dbg stuff needed a bit of help to actually walk the tables; it appears
that complex expressions confuse sdcc.
This also adds primitive teleterra bits, but no UI, etc.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
| |
Ok, way too big a patch, but things were in rough shape.
This patch adds support for the radio, both transmit and receive.
Then, because I could no longer run the TeleMetrum code on the TI
dongle, I ended up building a separate image for the TI board, which
involved creating a mechanism for having multiple command sets and splitting
code for different functions into different files.
|
| |
|
|
|
| |
This parses the GPS GGA message and stores it in a global variable,
protected by a mutex.
|
| |
|
|
| |
The T command shows the current wchan and PC for each task in the system.
|
| |
|
|
|
|
|
|
| |
GPS also pulled in serial support. The altitude tables take raw 11-bit
pressure sample numbers and convert them to standard pressure altitude
values.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| | |
|
| | |
|
| |
|
|
|
|
| |
These pieces come from the old telemetrum firmware.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
| |
This involved adding dma control and a mutex implementation.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
| |
This shrinks the application quite a bit, and should make it faster as well.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
| |
Various clean ups now that the basic code appears to work.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| | |
|
| |
|
|
|
|
| |
This offers a single CDC ACM device over USB.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
| |
Support our P2_0 connected buzzer, and formalize LED output support.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
Sample A/D at the timer tick, placing data in a ring
of samples.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
| |
Use Timer 1 to generate a 100Hz timer interrupt
|
| | |
|
| |
|
