| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
| |
We've now got a USB vendor ID called 'altusmetrum' for generic
altusmetrum devices (old USB ID 0x000A) while the general vendor name
for all devices is 'altusmetrum' as well.
This patch splits vendors and products into separate name spaces,
products are prefixed with product_ and vendor with (oddly) vendor_.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
This shouldn't happen, but it's easy enough to get back in sync by just
skipping lines with weird contents.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
monitor automatically
(yes, this should be two patches, but the diffs in AltosSerial were merged together).
First, this replaces the existing flush/flush_reply mess with two simple functions,
one to flush output to the serial device, making sure that all data written will be seen
while we wait for input. The other sucks any pending input off of the serial line and
discards it.
Second, AltosSerial now tracks whether the serial line is being used for telemetry
monitoring. If so, it enables monitoring, otherwise it disables it. Eliminates a
bunch of manual state tracking elsewhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
| |
The updated firmware places the callsign in each packet to comply with
regulations, this ensures that TeleDongle has the current callsign
configured.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
| |
Because Win7 doesn't expose the product name, we're swtiching to using
the USB idProduct/idVendor values. This patch adds support for
selecting devices by those new IDs.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
| |
This will permit either telemetry or eeprom data to be used to
construct the sequence of flight events for reply or data generation.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
| |
|
|
|
|
|
|
|
|
| |
Instead of only writing the serial number to the .eeprom file, write
all of the config values and all of the version reply to the .eeprom
file. The config values, in particular, contain the accelerometer
calibration data which is needed to correctly compute acceleration
from the captured accelerometer data.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
|
Renames the eeprom downloading code and adds a new file to share the
flight data constants across the various UI modules.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
