summaryrefslogtreecommitdiff
path: root/ao-bringup
Commit message (Collapse)AuthorAge
...
* fix argument to ao-cal-freq so devices other than /dev/ttyACM0 workRobert Garbee2016-01-16
|
* modify bringup scripts to handle TeleMega v2.0Bdale Garbee2016-01-10
|
* add automatic Bluetooth functionality check to turnon_telebtBdale Garbee2015-09-29
|
* turnon script for TeleBT v3.0Bdale Garbee2015-08-07
|
* add a paragraph about TeleBT battery charging to AltosDroid chapter in ↵Bdale Garbee2015-07-31
| | | | documentation
* move turnon_teledongle to new cal-freq codeBdale Garbee2015-07-28
|
* ao-bringup: Make turnon_easymega run without 'make install'Keith Packard2015-06-18
| | | | | | Use relative paths for all altos tools Signed-off-by: Keith Packard <keithp@aimi.keithp.com>
* ao-bringup: Use local versions of tools instead of /usr/bin for turnon_easymegaKeith Packard2015-06-18
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* ao-bringup: Fail turnon_easymega if accel cal failsKeith Packard2015-06-18
| | | | | | This prevents a failing board from being reported as good Signed-off-by: Keith Packard <keithp@keithp.com>
* Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altosRobert Garbee2015-06-13
|\
| * ao-bringup: Do telegps freq cal before testing GPSKeith Packard2015-06-05
| | | | | | | | | | | | | | This lets the GPS get some time to see sats while we're messing with the radio frequency calibration. Signed-off-by: Keith Packard <keithp@keithp.com>
| * ao-bringup: Use new ao-cal-freq program for cal-freq scriptKeith Packard2015-06-05
| | | | | | | | | | | | Remove shell script bits that were unreliable. Signed-off-by: Keith Packard <keithp@keithp.com>
* | add beep when test completesRobert Garbee2015-06-13
|/
* Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altosBdale Garbee2015-02-22
|\
| * ao-bringup: Changes for telebt for keith's hackingKeith Packard2015-02-16
| | | | | | | | | | | | | | Make the programming device auto-detect by username. Load binary from ~/altusmetrumllc Signed-off-by: Keith Packard <keithp@keithp.com>
| * ao-bringup/turnon_telemini: Detect which programmer to use by $USERKeith Packard2015-02-14
| | | | | | | | | | | | Bdale uses TD 100, keithp uses TD 186. Signed-off-by: Keith Packard <keithp@keithp.com>
* | swap names so v3.0 is the default TeleDongle version to turn onBdale Garbee2015-02-22
|/
* ao-bringup: Add turnon_teledonglev3Keith Packard2015-02-04
| | | | | | | TeleDongle v3 uses the LPC11U14 processor which has no on-chip eeprom, so we must reflash the device to set the default radio calibration value. Signed-off-by: Keith Packard <keithp@keithp.com>
* ao-bringup: Clear pending output before setting frequency.Keith Packard2014-12-09
| | | | | | Maybe this will unwedge things Signed-off-by: Keith Packard <keithp@keithp.com>
* improve test procedures for TeleMegaBdale Garbee2014-12-06
|
* ao-bringup: Auto-select programmer for teledongle turnonKeith Packard2014-09-26
| | | | | | | Bdale's programmer is SN 100, Keith's is SN 186. Use the username to figure out which one to use. Signed-off-by: Keith Packard <keithp@keithp.com>
* store cal value correctly even when we didn't need to change itBdale Garbee2014-09-13
|
* ao-bringup: Improve igniter testing. Add TeleMega and TeleMetrum testing.Keith Packard2014-09-12
| | | | | | | | | | The script lets you re-try each one when they fail, which is nice if you're hand-holding the setup. The TeleMetrum and TeleMega tests are adapted from the EasyMega tests and are hooked up to the turnon scripts. Signed-off-by: Keith Packard <keithp@keithp.com>
* ao-bringup: Use C version of ao-test-gps in test-telegpsKeith Packard2014-09-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* ao-bringup: Use C version of test-flash for telegpsKeith Packard2014-09-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altosBdale Garbee2014-09-06
|\ | | | | | | | | Conflicts: ao-bringup/turnon_telemega
| * ao-bringup: Test EasyMega boardsKeith Packard2014-08-28
| |
| * ao-bringup: Use ao-cal-accel instead of cal-accel in turnon scriptsKeith Packard2014-08-18
| | | | | | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* | tweaking test scriptsBdale Garbee2014-09-06
|/
* turn echo back on after accel cal in turnon_telemetrum so rest is easierBdale Garbee2014-08-18
|
* change easymega from v0.1 to v1.0, tweak to build on master, add to MakefileBdale Garbee2014-08-14
|
* update turnon toolsBdale Garbee2014-07-15
|
* ao-bringup: Use the C tools to test EasyMiniKeith Packard2014-06-22
| | | | | | | I think my USB driver in the kernel is broken; the nickle versions of these tools did very strange things and never worked. Signed-off-by: Keith Packard <keithp@keithp.com>
* turn-on support for TeleGPS1.4Bdale Garbee2014-06-15
|
* Merge remote-tracking branch 'origin/master'Keith Packard2014-05-12
|\
| * update TeleMega turn-on script and Releasing for new stable firmware homeBdale Garbee2014-05-12
| |
* | ao-bringup: Use official binaries for EasyMini turnonKeith Packard2014-05-12
| | | | | | | | | | | | | | | | Don't use locally built ones, use the official ones found in ~/altusmetrumllc/Binaries to ensure that all devices are shipped with known firmware. Signed-off-by: Keith Packard <keithp@keithp.com>
* | ao-bringup: test-baro should accept altitudes a bit below sea levelKeith Packard2014-05-12
|/ | | | | | | Testing baro sensors on a particularly high pressure day at Keith's house yields altitudes down to -20m or so. Signed-off-by: Keith Packard <keithp@keithp.com>
* ugly hack (just make sleep longer) to work around ttyACM* discovery issueBdale Garbee2014-04-13
|
* ao-bringup: Split out easymini test into separate scriptKeith Packard2014-04-05
| | | | | | This lets you run the easy mini testing code without also flashing the device. Signed-off-by: Keith Packard <keithp@keithp.com>
* ao-bringup: Get turnon_telemini workingKeith Packard2014-04-05
| | | | | | This script now does complete testing of the board Signed-off-by: Keith Packard <keithp@keithp.com>
* Add easymini turnon script and helpersKeith Packard2014-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* update turnon scripts to store cal valuesBdale Garbee2014-02-20
|
* have the cal-freq script save cal values to a fileBdale Garbee2014-02-16
|
* use firmware in /usr/share/altos for teledongle, update telemetrum for v2.0Bdale Garbee2014-01-28
|
* use firmware in /usr/share/altos for production flashingBdale Garbee2014-01-17
|
* add serial number to ao-usbload call, pass SERIAL to cal-freqBdale Garbee2013-12-14
|
* ao-bringup: Add turnon_telemega scriptKeith Packard2013-12-09
| | | | | | And a few helper programs Signed-off-by: Keith Packard <keithp@keithp.com>
* Add TeleMini v2.0 turnon scriptKeith Packard2013-11-12
|
* updated turn-on script for telebt 1.1Bdale Garbee2013-10-10
|
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 14:12:25 +0000