mjb/altos - AltOS - the operating system for Altus Metrum products

	Commit message (Collapse)	Author	Age
*	add beep to TeleMega turnon script	Bdale Garbee	2016-05-06
\|
*	ao-bringup: Use dfu-util to install flash loader on chaoskey	Keith Packard	2016-03-18
\| \| \| \|	Signed-off-by: Keith Packard <keithp@keithp.com>
*	ao-bringup: Switch to v1.0 for chaoskey	Keith Packard	2016-03-02
\| \| \| \| \| \| \|	Not going to build any more v0.1 boards. Also, chaoskey now uses the unique ID for a serial, so we don't need to provide a serial number. Signed-off-by: Keith Packard <keithp@keithp.com>
*	altos/chaoskey: Add support for flipping between raw and cooked bits	Keith Packard	2016-01-28
\| \| \| \| \| \| \| \|	Plug the 'force bootloader' thing onto the board while it's running and it will generate raw bits instead of running them through the CRC to whiten. Useful for validating the raw hardware. Signed-off-by: Keith Packard <keithp@keithp.com>
*	fix argument to ao-cal-freq so devices other than /dev/ttyACM0 work	Robert Garbee	2016-01-16
\|
*	modify bringup scripts to handle TeleMega v2.0	Bdale Garbee	2016-01-10
\|
*	add automatic Bluetooth functionality check to turnon_telebt	Bdale Garbee	2015-09-29
\|
*	turnon script for TeleBT v3.0	Bdale Garbee	2015-08-07
\|
*	add a paragraph about TeleBT battery charging to AltosDroid chapter in ↵	Bdale Garbee	2015-07-31
\| \| \| \|	documentation
*	move turnon_teledongle to new cal-freq code	Bdale Garbee	2015-07-28
\|
*	ao-bringup: Make turnon_easymega run without 'make install'	Keith Packard	2015-06-18
\| \| \| \| \| \|	Use relative paths for all altos tools Signed-off-by: Keith Packard <keithp@aimi.keithp.com>
*	ao-bringup: Use local versions of tools instead of /usr/bin for turnon_easymega	Keith Packard	2015-06-18
\| \| \| \|	Signed-off-by: Keith Packard <keithp@keithp.com>
*	ao-bringup: Fail turnon_easymega if accel cal fails	Keith Packard	2015-06-18
\| \| \| \| \| \|	This prevents a failing board from being reported as good Signed-off-by: Keith Packard <keithp@keithp.com>
*	Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos	Robert Garbee	2015-06-13
\|\
\| *	ao-bringup: Do telegps freq cal before testing GPS	Keith Packard	2015-06-05
\| \| \| \| \| \| \| \| \| \| \| \| \| \|	This lets the GPS get some time to see sats while we're messing with the radio frequency calibration. Signed-off-by: Keith Packard <keithp@keithp.com>
\| *	ao-bringup: Use new ao-cal-freq program for cal-freq script	Keith Packard	2015-06-05
\| \| \| \| \| \| \| \| \| \| \| \|	Remove shell script bits that were unreliable. Signed-off-by: Keith Packard <keithp@keithp.com>
* \|	add beep when test completes	Robert Garbee	2015-06-13
\|/
*	Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos	Bdale Garbee	2015-02-22
\|\
\| *	ao-bringup: Changes for telebt for keith's hacking	Keith Packard	2015-02-16
\| \| \| \| \| \| \| \| \| \| \| \| \| \|	Make the programming device auto-detect by username. Load binary from ~/altusmetrumllc Signed-off-by: Keith Packard <keithp@keithp.com>
\| *	ao-bringup/turnon_telemini: Detect which programmer to use by $USER	Keith Packard	2015-02-14
\| \| \| \| \| \| \| \| \| \| \| \|	Bdale uses TD 100, keithp uses TD 186. Signed-off-by: Keith Packard <keithp@keithp.com>
* \|	swap names so v3.0 is the default TeleDongle version to turn on	Bdale Garbee	2015-02-22
\|/
*	ao-bringup: Add turnon_teledonglev3	Keith Packard	2015-02-04
\| \| \| \| \| \| \|	TeleDongle v3 uses the LPC11U14 processor which has no on-chip eeprom, so we must reflash the device to set the default radio calibration value. Signed-off-by: Keith Packard <keithp@keithp.com>
*	ao-bringup: Clear pending output before setting frequency.	Keith Packard	2014-12-09
\| \| \| \| \| \|	Maybe this will unwedge things Signed-off-by: Keith Packard <keithp@keithp.com>
*	improve test procedures for TeleMega	Bdale Garbee	2014-12-06
\|
*	ao-bringup: Auto-select programmer for teledongle turnon	Keith Packard	2014-09-26
\| \| \| \| \| \| \|	Bdale's programmer is SN 100, Keith's is SN 186. Use the username to figure out which one to use. Signed-off-by: Keith Packard <keithp@keithp.com>
*	store cal value correctly even when we didn't need to change it	Bdale Garbee	2014-09-13
\|
*	ao-bringup: Improve igniter testing. Add TeleMega and TeleMetrum testing.	Keith Packard	2014-09-12
\| \| \| \| \| \| \| \| \| \|	The script lets you re-try each one when they fail, which is nice if you're hand-holding the setup. The TeleMetrum and TeleMega tests are adapted from the EasyMega tests and are hooked up to the turnon scripts. Signed-off-by: Keith Packard <keithp@keithp.com>
*	ao-bringup: Use C version of ao-test-gps in test-telegps	Keith Packard	2014-09-12
\| \| \| \|	Signed-off-by: Keith Packard <keithp@keithp.com>
*	ao-bringup: Use C version of test-flash for telegps	Keith Packard	2014-09-12
\| \| \| \|	Signed-off-by: Keith Packard <keithp@keithp.com>
*	Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos	Bdale Garbee	2014-09-06
\|\ \| \| \| \| \| \| \| \|	Conflicts: ao-bringup/turnon_telemega
\| *	ao-bringup: Test EasyMega boards	Keith Packard	2014-08-28
\| \|
\| *	ao-bringup: Use ao-cal-accel instead of cal-accel in turnon scripts	Keith Packard	2014-08-18
\| \| \| \| \| \| \| \|	Signed-off-by: Keith Packard <keithp@keithp.com>
* \|	tweaking test scripts	Bdale Garbee	2014-09-06
\|/
*	turn echo back on after accel cal in turnon_telemetrum so rest is easier	Bdale Garbee	2014-08-18
\|
*	change easymega from v0.1 to v1.0, tweak to build on master, add to Makefile	Bdale Garbee	2014-08-14
\|
*	update turnon tools	Bdale Garbee	2014-07-15
\|
*	ao-bringup: Use the C tools to test EasyMini	Keith Packard	2014-06-22
\| \| \| \| \| \| \|	I think my USB driver in the kernel is broken; the nickle versions of these tools did very strange things and never worked. Signed-off-by: Keith Packard <keithp@keithp.com>
*	turn-on support for TeleGPS1.4	Bdale Garbee	2014-06-15
\|
*	Merge remote-tracking branch 'origin/master'	Keith Packard	2014-05-12
\|\
\| *	update TeleMega turn-on script and Releasing for new stable firmware home	Bdale Garbee	2014-05-12
\| \|
* \|	ao-bringup: Use official binaries for EasyMini turnon	Keith Packard	2014-05-12
\| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \|	Don't use locally built ones, use the official ones found in ~/altusmetrumllc/Binaries to ensure that all devices are shipped with known firmware. Signed-off-by: Keith Packard <keithp@keithp.com>
* \|	ao-bringup: test-baro should accept altitudes a bit below sea level	Keith Packard	2014-05-12
\|/ \| \| \| \| \| \|	Testing baro sensors on a particularly high pressure day at Keith's house yields altitudes down to -20m or so. Signed-off-by: Keith Packard <keithp@keithp.com>
*	ugly hack (just make sleep longer) to work around ttyACM* discovery issue	Bdale Garbee	2014-04-13
\|
*	ao-bringup: Split out easymini test into separate script	Keith Packard	2014-04-05
\| \| \| \| \| \|	This lets you run the easy mini testing code without also flashing the device. Signed-off-by: Keith Packard <keithp@keithp.com>
*	ao-bringup: Get turnon_telemini working	Keith Packard	2014-04-05
\| \| \| \| \| \|	This script now does complete testing of the board Signed-off-by: Keith Packard <keithp@keithp.com>
*	Add easymini turnon script and helpers	Keith Packard	2014-04-02
\| \| \| \|	Signed-off-by: Keith Packard <keithp@keithp.com>
*	update turnon scripts to store cal values	Bdale Garbee	2014-02-20
\|
*	have the cal-freq script save cal values to a file	Bdale Garbee	2014-02-16
\|
*	use firmware in /usr/share/altos for teledongle, update telemetrum for v2.0	Bdale Garbee	2014-01-28
\|
*	use firmware in /usr/share/altos for production flashing	Bdale Garbee	2014-01-17
\|