summaryrefslogtreecommitdiff
path: root/altosui
Commit message (Collapse)AuthorAge
...
* altosui: Ship EasyMini firmware tooKeith Packard2013-12-19
| | | | | | | Missing the FIRMWARE_EMINI define left all easy mini firmware out of the distribution Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: When device has no valid romconfig, set RF cal to 0Keith Packard2013-12-19
| | | | | | | This is intended to signal to the user that no valid value was found and that they'd best pick something sensible. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Remove some debug printfsKeith Packard2013-12-18
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Define 3.8 as a good battery and 3.5 as a good igniterKeith Packard2013-12-18
| | | | | | | Use defined values everywhere instead of copying. Adjust battery up to 3.8 to ensure there's enough voltage to not trip the comparators Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Add docs to Mac OS X dmg distributionKeith Packard2013-12-18
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Hide non-applicable altimeter config valuesKeith Packard2013-12-18
| | | | | | This makes configuring EasyMini a lot easier... Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Pass InterruptedException up the stack instead of hiding itKeith Packard2013-12-18
| | | | | | | | | | When interrupting a thread that is talking to a serial device, it's important not to have that thread discard the InterruptedException so that it will actually terminate. This patch removes a bunch of places that were discarding InterruptedExceptions and lets higher level code see them so that they can exit cleanly. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Add EasyMini bits to fat distribution images. Update telemetrum.infKeith Packard2013-12-17
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* java: Add -target 1.6 to all java compilesKeith Packard2013-12-10
| | | | | | This makes sure the results can run with the old JVM Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Ship TeleMega-v1.0 firmwareKeith Packard2013-12-09
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: When flashing to TeleDongle or TeleBT, match any .ihx fileKeith Packard2013-12-08
| | | | | | | | Let the user pick any .ihx file when using a device which can only be used as a pair programmer. Note that 'telemetrum' can be either, and we'll assume that it's a self-programmed device (v2) for now. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Match directories in hex file matcherKeith Packard2013-12-08
| | | | | | This makes it possible to navigate around the file system Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Add self-flashing codeKeith Packard2013-12-08
| | | | | | | This adds the ability to use the AltOS flash-loader on both STM and NXP processors. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Support binary reading/writing in AltosLinkKeith Packard2013-12-08
| | | | | | | Binary reads require an explicit length, and do not work while telemetry is running. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Clean up serial close handlingKeith Packard2013-12-07
| | | | | | | | | Unify serial close processing in a single function (close_serial), make everyone else call that. This avoids a couple of cases where the device would be closed and not removed from the devices_opened list, leading to 'device is already in use' messages. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Don't try to report bearing/elevation without GPSKeith Packard2013-12-07
| | | | | | | If the distance from the pad cannot be computed (due to lacking GPS), then don't try to report it. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Handle units in pyro config.Keith Packard2013-11-25
| | | | | | | This lets you edit the pyro configuration using imperial units if desired. Signed-off-by: Keith Packard <keithp@keithp.com>
* Ignore mac .dmg filesKeith Packard2013-11-12
|
* altosui, altoslib: Move eeprom download code to altoslibKeith Packard2013-11-12
| | | | | | This should make adding eeprom downloading to altosdroid easier Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Make AltosEepromDownload not swing-dependentKeith Packard2013-11-12
| | | | | | Will move to altoslib Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Start moving eeprom download logic to altoslibKeith Packard2013-11-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Raise ParseException on invalid eeprom formatKeith Packard2013-11-12
| | | | | | | Make sure the user knows when data are not downloaded successfully because the UI doesn't understand the eeprom format. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib,altosui: Be more robust when graphing bogus .telem filesKeith Packard2013-10-14
| | | | | | | | | | | | Deal with files containing multiple serial number/flight number values by preserving the boost_tick value across state resets. Check for invalid state when computing actual boost time for the stats window. Ignore invalid speed/accel values when computing averages. Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Add easymini outline to distributionKeith Packard2013-10-09
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Binaries to package are only in per-product dirs nowKeith Packard2013-10-08
| | | | | | | | | | Each cc1111 project used to stick the binary in src/, but I got rid of that when we ended up with so much stuff in src that it was a mess. Building the release now requires looking in the appropriate directory for each binary to ship. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Include device name in Table viewKeith Packard2013-09-06
| | | | | | It's part of the telemetry, so we might as well display it Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Set 'flight' value in AltosEepromMonitor window during downloadKeith Packard2013-09-06
| | | | | | This feature was lost in the AltosState updates Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Load Telem files in AltosDataChooser tooKeith Packard2013-09-06
| | | | | | Telem file loading was stubbed out from AltosState changes Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib/altosui: Add TeleMini-v1.0 eeprom supportKeith Packard2013-09-06
| | | | | | Got lost in the AltosState transition Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Remove debugging printf from InfoTableKeith Packard2013-09-05
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Fix 'Graph Flight' button in landed dialogKeith Packard2013-09-05
| | | | | | Telemetry file reading was broken (oops!) Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Finish AltosState changes. Update version number.Keith Packard2013-09-05
| | | | | | | Removes all of the AltosRecord bits, changes the monitor idle bits to have per-object state updaters. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: More AltosState hackingKeith Packard2013-09-02
| | | | | | EasyMini graphs are looking good now. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib/altosui: Further AltosState transition workKeith Packard2013-08-31
| | | | | | | Parses most eeprom and telem records now; altosui updated to show from AltosState info. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib/altosui: Fixes for state changesKeith Packard2013-08-31
| | | | | | | Format for gps alt (now double). Use new code for csv file loading. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib/altosui: Get legacy telem working with new AltosState structureKeith Packard2013-08-31
| | | | | | Make AltosTelemetry work without AltosRecord Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib, altosui: Restructured state management now does TM eeprom filesKeith Packard2013-08-29
| | | | | | | Removed uses of AltosRecord from AltosState, now just need to rewrite the other AltosState changing code to match Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: AltosDbm class was missing somehowKeith Packard2013-08-17
| | | | | | This doesn't appear to have been added? Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Add raw pressure to the AltosUI graphKeith Packard2013-06-17
| | | | | | A nice addition, and useful when diagnosing baro sensor issues Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Use preferred units for main deployment height configurationKeith Packard2013-06-11
| | | | | | | Show and accept values in the preferred units; create a separate list of preferred values for each set of units Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Missing 'break' after selecting 'mega' format detectionKeith Packard2013-05-26
| | | | | | Caused 'mega' logs to be dumped in 'mini' format which didn't work well. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Stop downloading mega eeprom on empty blockKeith Packard2013-05-26
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* Merge branch 'lpc'Keith Packard2013-05-21
|\
| * Add Mini logging format. Use in EasyMinilpcKeith Packard2013-05-19
| | | | | | | | | | | | | | This is a 16-byte record that includes all of the sensor data in each sensor record, along with records for flight state changes. Signed-off-by: Keith Packard <keithp@keithp.com>
* | altosui: Add TeleBT firmware to releaseKeith Packard2013-05-21
|/ | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Generate useful KML files from TeleGPS logsKeith Packard2013-05-14
| | | | | | | Use GPS altitude when baro altitude is not present. Don't require flight number. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Use GPS alt + baro height for KML altitudeKeith Packard2013-05-14
| | | | | | | | | GPS altitude is generally more absolutely correct than baro altitude, so use that as the nominal pad altitude when generating a KML file. This results in a KML file that has the flight trace start and end closer to the ground, which is always nice. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Wait for valid callsign/flight when graphingKeith Packard2013-05-10
| | | | | | | Wait for the data record to indicate that the flight value is valid before setting the graph callsign/flight/serial data. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui/altoslib: Move more flashing code from altosui to altoslibKeith Packard2013-05-07
| | | | | | | Required a bit of refactoring to eliminate swing types from the flashing code, but nothing major. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui & altoslib: Move a pile of debug/programming bits to altoslibKeith Packard2013-05-07
| | | | | | Prepare to create external Java utilities to flash devices Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-08 04:43:54 +0000