summaryrefslogtreecommitdiff
path: root/altoslib/AltosIdleMonitor.java
Commit message (Collapse)AuthorAge
* altoslib: Make cal_data private in AltosDataListenerKeith Packard2017-06-20
| | | | | | This way we can create it as needed. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib,altosuilib: Bump library version numbersKeith Packard2017-06-13
| | | | | | The API and ABI have changed a bit since 1.7 Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Do data analysis on raw values rather than AltosStateKeith Packard2017-05-25
| | | | | | | | Use AltosFlightSeries instead of a sequence of AltosState records when processing saved data. This provides a better way of doing filtering and plotting. Signed-off-by: Keith Packard <keithp@keithp.com>
* Switch from GPLv2 to GPLv2+Keith Packard2016-07-12
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* Bump java library versionsKeith Packard2016-05-12
| | | | | | Prepare for 1.6.4 release Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Deal with TeleMetrum v2.0 MMA6555 being invertedKeith Packard2016-05-02
| | | | | | | | | | | | | | | | Dumping the MMA655X data with the 'A' command provides the raw sensor value. On TM v2.0 boards, the sensor is inverted, and all of the firmware uses the inverted value except for the 'dump the raw data' command. As a result, MonitorIdle was using the un-inverted value and displaying mystic values. I've fixed this in the ground station code by checking the product name and conditionally inverting the value (4095 - value) for TeleMetrum v2.0 products. Unknown products will generate a warning dialog on AltosUI so we'll catch places where we've failed to add a new product name. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosdroid: Add idle mode monitoring, reboot. Start ignitersKeith Packard2016-04-25
| | | | | | | This adds three idle mode operations -- monitor idle, reboot flight computer and test igniters. The igniter test isn't quite wired up. Signed-off-by: Keith Packard <keithp@keithp.com>
* Update java library version numbersKeith Packard2016-04-21
| | | | | | Prepare for 1.6.3 release. Signed-off-by: Keith Packard <keithp@keithp.com>
* Update java library versionsKeith Packard2016-01-10
| | | | | | altoslib is API incompatible with 1.6.1 release due to altos.state updates. Signed-off-by: Keith Packard <keithp@keithp.com>
* Bump Java library versionsKeith Packard2015-07-15
| | | | | | Avoid problems if you have an old version of the library installed Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib/altosuilib: Update library version to 7Keith Packard2015-05-25
| | | | | | So many ABI/API changes Signed-off-by: Keith Packard <keithp@keithp.com>
* Bump java library versionsKeith Packard2015-02-07
| | | | | | | Lots of minor API/ABI changes; make sure people can install both 1.5 and 1.6 at the same time. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Pop up 'Connecting' dialog during Monitor IdleKeith Packard2014-10-30
| | | | | | | This was a bit harder than expected as I had to wire up a way to shut down the whole monitor idle window when you clicked on the cancel button. Signed-off-by: Keith Packard <keithp@keithp.com>
* java: Bump java library versions for next releaseKeith Packard2014-06-16
| | | | | | Prepare for future release by bumping java versions now Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib/altosuilib: Change versions to altoslib:4, altosuilib:2Keith Packard2014-05-25
| | | | | | API has changed for these libraries, time to bump the file versions Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Bump library versionKeith Packard2013-12-20
| | | | | | | Prepare for next release by making sure we notice that the API/ABI for this library has changed. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Remove some debug printfsKeith Packard2013-12-18
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Pass InterruptedException up the stack instead of hiding itKeith Packard2013-12-18
| | | | | | | | | | When interrupting a thread that is talking to a serial device, it's important not to have that thread discard the InterruptedException so that it will actually terminate. This patch removes a bunch of places that were discarding InterruptedExceptions and lets higher level code see them so that they can exit cleanly. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Finish AltosState changes. Update version number.Keith Packard2013-09-05
| | | | | | | Removes all of the AltosRecord bits, changes the monitor idle bits to have per-object state updaters. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Use sequence numbers to track GPS updates to AltosRecordKeith Packard2013-05-14
| | | | | | | | | | | State objects now record what GPS sequence ID they have to know when the GPS data has been updated. Record objects bump the GPS sequence each time new GPS data is recorded. This way, record objects aren't modified as they're iterated over to generate the list of state objects which makes it possible to iterate multiple times and get the same resulting set of states. Signed-off-by: Keith Packard <keithp@keithp.com>
* name change from MegaMetrum to TeleMegaBdale Garbee2013-04-22
|
* altoslib/altosui: Adapt monitor idle to new AltosListenerStateKeith Packard2013-04-09
| | | | | | Move the receiver battery monitoring to the new spot Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib/altosui: Carry receiver status around in AltosListenerStateKeith Packard2013-04-09
| | | | | | | | | | This moves the crc_errors into the new structure and adds a receiver battery voltage value there as well. Now the receiver status can be monitored separately from the flight status. That also means that code receiving state updates should be prepared to accept missing listener or flight state values. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Interrupt MonitorIdle when changing frequency/callsignKeith Packard2013-02-10
| | | | | | | | When switching radio parameters, the local device needs to have the parameters switched, so interrupt the current operation and start over, the frequency and callsign will be set the next time through. Signed-off-by: Keith Packard <keithp@keithp.com>
* Add version numbers to java librariesKeith Packard2013-01-29
| | | | | | | Make our private java library names include a version number so we can ship and install multiple versions at the same time. Signed-off-by: Keith Packard <keithp@keithp.com>
* Change AltosLib to altoslibKeith Packard2013-01-29
| | | | | | Follow Java conventions Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Move computed state from AltosRecord to AltosStateKeith Packard2012-10-21
| | | | | | | Make AltosRecord simply track the raw data and have AltosState hold all computed values, including cross-packet averages and computed speeds. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Gather Tm sensor data in Monitor Idle modeKeith Packard2012-09-16
| | | | | | | | Tm is pretty much the same as TM for the analog sensors, it's just missing the accelerometr. Use the same code for constructing an AltosRecord for it Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: move distinct classes to separate filesMike Beattie2012-09-07
| | | | Signed-off-by: Mike Beattie <mike@ethernal.org>
* altoslib: remove duplicate AltosGPSQuery classMike Beattie2012-09-07
| | | | Signed-off-by: Mike Beattie <mike@ethernal.org>
* altoslib: Remove un-needed importsMike Beattie2012-09-07
| | | | Signed-off-by: Mike Beattie <mike@ethernal.org>
* altosui: Handle Monitor Idle errors betterKeith Packard2012-07-29
| | | | | | | | Deal with missing data by checking for MISSING in more places. Handle serial communication failures during send by reporting back from libaltos. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Make scan UI handle incremental telem dataKeith Packard2012-07-18
| | | | | | | | | The new telem format doesn't send everything in each telem packet, so we need to handle updating information incrementally in the scan results. This involved clearing old scan data when switching frequencies and then updating existing entries with new data as it arrives. Signed-off-by: Keith Packard <keithp@keithp.com>
* altoslib: Move idle monitor managing code to altoslibKeith Packard2012-07-17
More stuff to be shared (potentially) Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 22:31:03 +0000