summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
...
* libaltos: Mis-allocated device list in libaltosKeith Packard2011-08-13
| | | | | | Would overrun mis-allocated array, causing chaos. Signed-off-by: Keith Packard <keithp@keithp.com>
* ao-tools: ao-list was crashing with more than 3 devices connectedKeith Packard2011-08-13
| | | | | | | the list of devices was getting realloced for each new device, but that realloc was too small. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: remove monitor disable stubs from altimeter codeKeith Packard2011-08-11
| | | | | | | | | | | | Monitor mode in the ground-station boards must be disabled when the radio is going to be used for another purpose, or the radio parameters changed. That places monitor-mode disable calls in other parts of the system which are shared with the altimeter code. Elide the ao_set_monitor calls for builds which do not include any monitoring code. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Apply igniter boot pulse-width reduction to teleminiKeith Packard2011-08-11
| | | | | | | TeleMini needs the same fix as TeleMetrum to reduce startup igniter pulses. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Pull igniter pins low as soon as possible at boot timeKeith Packard2011-08-11
| | | | | | | This reduces the pulse width on the igniter circuit caused by the default cc1111 pin configuration at powerup time. Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Add 1.0 release notes.Keith Packard2011-08-10
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Add release notes, include them in altusmetrum doc. Shuffle altusmetrumKeith Packard2011-08-10
| | | | | | | This adds release notes and includes them in the main altusmetrum doc as well as making stand-alone html available for inclusion in the website. Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Add telemetry docs to debian/linux/mac/windows packagesKeith Packard2011-08-10
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Describe 'stats' tab in Graph UI, 'Graph Flight' button.Keith Packard2011-08-10
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Document Ignite Mode and Pad Orientation configuration optionsKeith Packard2011-08-10
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Update altusmetrum.xsl for v1.0 software and TeleMiniKeith Packard2011-08-10
| | | | | | | Add TeleMini references and sections as appropriate, update AltosUI docs to describe new bits. Signed-off-by: Keith Packard <keithp@keithp.com>
* Bump version to 0.9.6.0Keith Packard2011-08-10
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Move launch-sites.txt file to altusmetrum.orgKeith Packard2011-08-10
| | | | | | | | The official URL is now: http://www.altusmetrum.org/AltOS/launch-sites.txt Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Plot reasonable data from Tm filesKeith Packard2011-08-10
| | | | | | | Don't plot acceleration based on baro data. Display baro speed if accel speed isn't available. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Prune telemetry file graphs to just the flightKeith Packard2011-08-10
| | | | | | Remove data earlier than 1 second before boost and data after landing. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Add a 'Graph Flight' button to the 'landed' tabKeith Packard2011-08-10
| | | | | | | This lets you see the results of a flight as soon as the rocket lands using the telemetry data. Signed-off-by: Keith Packard <keithp@keithp.com>
* Altosui: Add flight statistics tab to graph windowKeith Packard2011-08-10
| | | | | | Provide basic flight stats alongside the flight graph. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Ship TeleMini v1.0 firmware with fat blobsKeith Packard2011-08-09
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Ensure serial code tracks reply nesting correctlyKeith Packard2011-08-09
| | | | | | | Trap any exceptional return conditions from 'get_reply' to make sure in_reply gets decremented. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Don't export product defs from libaltosKeith Packard2011-08-09
| | | | | | | As we add new products, that would change the ABI generated for java, invaliding old library versions sitting around for windows and mac. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch telemini from v0.1 to v1.0Keith Packard2011-08-09
| | | | | | | | TeleMini production boards are firmware compatible with the v0.1 design, so instead of creating another product, just rename the existing one. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Add close button to 'fire' dialogKeith Packard2011-08-08
| | | | | | Easier to hit than the tiny close box in the frame. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Make set of telemetries to use while scanning configurableKeith Packard2011-08-08
| | | | | | with a preference to remember across application runs. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Reading serial from swing thread only bad if remoteKeith Packard2011-08-08
| | | | | | Make the warning on this condition based on whether the link is remote. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Remove unused AltosConfigData from AltosTelemetryReaderKeith Packard2011-08-08
| | | | | | Now that AltosSerial manages this data, it's not needed here. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Flush radio setting to serial deviceKeith Packard2011-08-08
| | | | | | When changing frequencies, make sure the device hears about it. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Remove debugging printfs from AltosSerialKeith Packard2011-08-08
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Show AltosFrequency in scan resultsKeith Packard2011-08-08
| | | | | | Include frequency and description instead of just frequency. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Save frequency after setting it in AltosFlightUIKeith Packard2011-08-08
| | | | | | Otherwise we'll just save the old frequency. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Have single radio_to_frequency functionKeith Packard2011-08-08
| | | | | | | This takes all three radio params (setting, cal, channel) and computes the current frequency. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: A few misc cleanups.Keith Packard2011-08-08
| | | | | | | Initialize radio_setting as it won't be set for older devices ever. Remove unused set_radio_frequency function from AltosConfigUI. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Must set radio calibration before radio settingKeith Packard2011-08-08
| | | | | | | | | | | Setting the radio calibration erases any previous radio setting as the radio calibration change invalidates any previously computed radio setting for a specific frequency. Hence, the radio setting must be configured *after* the radio calibration value lest it be ignored. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: minor type in comment about accel correctionKeith Packard2011-08-08
| | | | | | | Kurt Roeckx found a typo in the equations describing how the accelerometer is corrected by the 5V reference measurement. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Pull out BlueTooth supportKeith Packard2011-08-08
| | | | | | | This leaves the code in place, but commented out so that it isn't used until we've got a bluetooth device ready for use. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: altimeter is not spelled altimterKeith Packard2011-08-08
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* Set version to 0.9.5.0Keith Packard2011-08-08
| | | | | | Make the frequency-based systems distinct Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Convert from channels to frequenciesKeith Packard2011-08-08
| | | | | | | | | | | | | Major areas: * Preferences are stored as frequencies instead of channels * Serial configuration is done using frequencies * UI is presented with frequency lists Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Add dialogs to configure 'common' frequenciesKeith Packard2011-08-08
| | | | | | | These are stored in preferences, but not yet hooked up to the TM/TD configure dialogs Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add ability to set arbitrary radio frequencyKeith Packard2011-08-08
| | | | | | | | This adds a separate config parameter to control the raw radio frequency setting, allowing the user to select an arbitrary frequency instead of being forced to choose one of the 10 pre-defined 'channels'. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Remove pad_orientation functions from non-accel devicesKeith Packard2011-08-08
| | | | | | Anything without an accelerometer can't detect pad orientation. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Change button to 'Configure Altimeter'Keith Packard2011-08-08
| | | | | | Now that we've got more than one model. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Correct flight log max on Tm to 5kKeith Packard2011-08-08
| | | | | | | Was using the wrong #define name to check for Tm/Tn devices that use internal flash for data storage. Signed-off-by: Keith Packard <keithp@keithp.com>
* update changelogs for Debian buildBdale Garbee2011-08-08
|
* rewind changelog for re-build of 0.9.4.5Bdale Garbee2011-08-08
|
* clean up all existing lintian warningsBdale Garbee2011-08-08
|
* build depend on bluetooth dev packagedebian/0.9.4.5Bdale Garbee2011-08-08
|
* stop doing automatic tag push during buildsBdale Garbee2011-08-08
|
* update changelogs for Debian buildBdale Garbee2011-08-08
|
* update changelogs for Debian buildBdale Garbee2011-08-08
|
* simplify version in last changelog entry so git-dch is less confused0.9.4.5Bdale Garbee2011-08-08
|
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-09 14:08:42 +0000