mjb/altos - AltOS - the operating system for Altus Metrum products

	Commit message (Expand)	Author	Age
*	altos-avr: Enable command processor over serial line in demo	Keith Packard	2011-05-13
*	altos-avr: Initial OS port to AVR	Keith Packard	2011-05-13
*	ao-bringup-avr: cleaner stack switching code	Keith Packard	2011-05-13
*	ao-bringup-avr: clean up alternate stack code	Keith Packard	2011-05-13
*	ao-bringup-avr: switching to alternate stack works	Keith Packard	2011-05-13
*	ao-bringup-avr: Create common 'ao-bringup' interfaces	Keith Packard	2011-05-12
*	Add uart test	Keith Packard	2011-05-12
*	Run on new stack	Keith Packard	2011-05-12
*	ao-bringup-avr: Switch to ADC13	Keith Packard	2011-05-12
*	ao-bringup-avr: Flip to 8MHz clock for TeleScience	Keith Packard	2011-05-11
*	ao-bringup-avr: Make LED PWM from ADC0 value	Keith Packard	2011-05-11
*	ao-bringup-avr: Initialize crystal clock and 100Hz timer interrupt	Keith Packard	2011-05-11
*	ao-bringup-avr: Enable crystal clock in blink demo	Keith Packard	2011-05-11
*	Merge branch 'telebt' into telescience	Keith Packard	2011-05-11
\|\
\| *	Revert "altos: Debugging TBT issues -- check pin configuration after boot"	Keith Packard	2011-05-06
\| *	altos: clear CPU port 1 interrupt flag when handled	Keith Packard	2011-05-06
\| *	altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line	Keith Packard	2011-05-06
\| *	altos: Initialize beeper for telebt	Keith Packard	2011-05-06
\| *	altos: Debugging TBT issues -- check pin configuration after boot	Keith Packard	2011-05-06
\| *	altos: Add beeper to TBT v0.1	Keith Packard	2011-05-06
\| *	altos: pull TBT v0.1 ser_reset line low	Keith Packard	2011-05-06
\| *	altos: Fix BT link status pin for real TBT hardware	Keith Packard	2011-05-06
\| *	altos: Use USART configuration 1 with flow control for TBT	Keith Packard	2011-05-06
\| *	altos: Add telebt-v0.1 to Makefile	Keith Packard	2011-05-06
\| *	first cut at a telebt turn on script	Bdale Garbee	2011-05-06
\| *	altos: Add preliminary telebt v0.1 defines	Keith Packard	2011-05-06
* \|	ao-bringup-avr: fix blinking code to actually drive the pin as output	Keith Packard	2011-05-03
* \|	ao-bringup-avr: Add very primitive 'blink' to toggle the 32u4 B7 line	Keith Packard	2011-05-03
\|/
*	altosui: Fix BT manage dialog so that the device lists resize	Keith Packard	2011-04-25
*	altosui: Move AltosIgniteUI device open out of Swing thread	Keith Packard	2011-04-25
*	altosui: Display reader name (usually the device) when an I/O error occurs	Keith Packard	2011-04-25
*	altosui: Fix TeleBT name in flight monitor title	Keith Packard	2011-04-25
*	altosui: Separate out flash debug code to separate thread	Keith Packard	2011-04-25
*	altos: add telebt-v0.0 Makefile	Keith Packard	2011-04-23
*	altosui: Make flight data download work through TeleBT	Keith Packard	2011-04-19
*	Merge branch 'telemini' into telebt	Keith Packard	2011-04-19
\|\
\| *	altos: Write a few pre-launch samples for Tm/Tn devices	Keith Packard	2011-04-14
\| *	altosui: oops - lost state changes when downloading eeprom data.	Keith Packard	2011-04-13
\| *	altos/altosui: Log averaged baro sensor data in Tm/Tn	Keith Packard	2011-04-09
* \|	altosui: Eliminate ao_cmd_filter hook	Keith Packard	2011-04-19
* \|	altos: remove BT logging code	Keith Packard	2011-04-19
* \|	altos: Remove bt debug command	Keith Packard	2011-04-19
* \|	altos: Simplify BT communications	Keith Packard	2011-04-19
* \|	altos: Solidify BT connections	Keith Packard	2011-04-19
* \|	altosui: Wait two seconds after bluetooth connect XXX	Keith Packard	2011-04-19
* \|	altos: Add delays to bt startup sequence	Keith Packard	2011-04-19
* \|	altosui: Use persistent list of bluetooth devices for device dialogs	Keith Packard	2011-04-19
* \|	altosui: Make bluetooth dialog modal	Keith Packard	2011-04-18
* \|	altosui: Make AltosBTDevice implement AltosDevice interface	Keith Packard	2011-04-14
* \|	altosui: Create abstract AltosDevice class	Keith Packard	2011-04-14