summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
...
| * fleshing out logging for telefiretwoBdale Garbee2017-04-22
| * enable spi flash on telefiretwoBdale Garbee2017-04-22
| * fix TeleFireTwo product name in ao-list outputBdale Garbee2017-04-22
| * altos/stmf0: Pull beeper pin low when beeper is offKeith Packard2017-04-21
| * doc: Finish updates for v1.7Keith Packard2017-04-21
| * altos/lpc: Really fix aes entry in lpc vpathKeith Packard2017-04-21
| * Replace turnon_telemini with v3 version. Add test-teleminiv3Keith Packard2017-04-21
| * doc: Update TeleMini v3 photos to production unitKeith Packard2017-04-21
| * alots/stmf0: Fix vpath entry for AES directoryKeith Packard2017-04-21
| * altos/lpc,altos/stmf0: Use -n flag to work around link editor issueKeith Packard2017-04-21
| * altos/telemini-v3.0: Remove vestiges of the pre-USB codeKeith Packard2017-04-21
| * altos/lpc: Add (void *) cast to fix alignment warningKeith Packard2017-04-21
| * altos/lpc: Fix up Makefile definitionsKeith Packard2017-04-21
| * ao-test-baro: Be more lax about altitude checksKeith Packard2017-04-21
| * altos/telemini-v3.0: Add flash loaderKeith Packard2017-04-19
| * altos/telemini-v3.0: Update to production hardwareKeith Packard2017-04-19
| * altos/telebt-v3.0: Add LCO bits for testingKeith Packard2017-04-19
| * altos/telefiretwo-v0.2: Add AO_CC1200_SPI_SPEEDKeith Packard2017-04-19
| * add new ADC channels for telefiretwoBdale Garbee2017-04-19
| * need top level Makefile tooBdale Garbee2017-04-18
| * builds, loads, runs, not very useful yetBdale Garbee2017-04-18
| * copy telefiretwo-v0.2 to start firmware for v1.0Bdale Garbee2017-04-18
| * telegps-v2.0: Remove fec_tx code and ADC logging.Keith Packard2017-04-13
| * altos/stmf0: Split up rom load in altos.ld to make linker happyKeith Packard2017-04-13
| * cortexelf-v1: Fetch data at TPB rising when MWR or MRD are lowKeith Packard2017-04-13
| * altos/telegps: Inherit LDFLAGS from lpc make specificationKeith Packard2017-04-13
| * initial cut at telegps-v2.0 firmwareBdale Garbee2017-04-13
| * cortexelf-v1: Initialize key matrix codeKeith Packard2017-04-09
| * cortexelf-v1: Bump SPI pin speed to 40MHz to for sdcard. Fix VGA DMA.Keith Packard2017-04-09
| * altos: Use MP switch in cortexelf boot loader for force loader modeKeith Packard2017-04-09
| * altos: Escape lisp REP loop with () inputKeith Packard2017-04-09
| * altos: Document a few more SPI mode bits in VGA driverKeith Packard2017-04-09
| * altos: Drive row low instead of high in matrix driverKeith Packard2017-04-09
| * altos: Place AS1107 in 'normal' mode at end of init sequenceKeith Packard2017-04-09
| * ao-elftohex: Add conditions for skipping ELF sectionsKeith Packard2017-04-09
| * cortexelf-v1: More 1802 noodlingKeith Packard2017-04-04
| * stm: Add more mask-based GPIO controlsKeith Packard2017-04-04
| * altos: Allow programs to enable SDCARD debugging if desiredKeith Packard2017-04-04
| * altos: Disable FAT commands unless requestedKeith Packard2017-04-04
| * telegps-v0.1: Hack up for SDCARD debuggingKeith Packard2017-04-04
| * altos: Define CC115L spi speed in each productKeith Packard2017-04-04
| * cortexelf-v1: Add pin definitions for 1802 connectionsKeith Packard2017-04-03
| * stm: Add a few more GPIO functions to make dealing with the 1802 easierKeith Packard2017-04-03
| * cortexelf-v1: Make bit flipping array constantKeith Packard2017-04-03
| * cortexelf-v1: doodling with 1802 bitsKeith Packard2017-04-03
| * cortexelf-v1: Add bit flipping array generatorKeith Packard2017-04-02
| * cortexelf-v1: Hook up hex keypad using matrix input driverKeith Packard2017-04-02
| * altos: Allow buttons to be high when pressed rather than lowKeith Packard2017-04-02
| * altos: add button matrix driverKeith Packard2017-04-02
| * cortexelf-v1: Hook up AS1107 in test modeKeith Packard2017-04-02
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-12 10:56:21 +0000