summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
* Back to 0dBmKeith Packard2009-03-25
* Make radio test compile againKeith Packard2009-03-25
* Wait for xtal to stabilizeKeith Packard2009-03-25
* Check serial inputKeith Packard2009-03-25
* Eliminate array walkingKeith Packard2009-03-25
* Add a per-char delayKeith Packard2009-03-25
* Use UTX1IF to wait for serial TX completeKeith Packard2009-03-25
* Send more interesting textKeith Packard2009-03-25
* More random serial bit frobbingKeith Packard2009-03-25
* Flip serial TX code around a bitKeith Packard2009-03-25
* Try serial polarity high/highKeith Packard2009-03-25
* Make serial test simplerKeith Packard2009-03-25
* Flip start/stop bits aroundKeith Packard2009-03-25
* Stop highKeith Packard2009-03-24
* Change radio to -30dBmKeith Packard2009-03-24
* Add serial test programKeith Packard2009-03-24
* Wait for xtal to stabilize after changing to 24MHzKeith Packard2009-03-24
* Actually return byte read from SPIKeith Packard2009-03-24
* Clear UxCSR_TX_BYTE after transmitting a byteKeith Packard2009-03-24
* Led the LED turn onKeith Packard2009-03-24
* actually write and compare SPI test bitsKeith Packard2009-03-24
* Add USART-based SPI test codeKeith Packard2009-03-24
* Change spi test stringKeith Packard2009-03-24
* Oops, not merging in the bit read for SPI testKeith Packard2009-03-24
* Adjust clock/data phase for spi testKeith Packard2009-03-24
* MISO needs to be an inputKeith Packard2009-03-24
* Add bit-banging spi eeprom test programKeith Packard2009-03-24
* working beep at around 4khzBdale Garbee2009-03-18
* Add simple test program to light up the transmitter at 434.550MHzKeith Packard2009-03-18
* Correctly comment which bit the beep program usesKeith Packard2009-03-15
* Add telemetrum beeper exampleKeith Packard2009-03-15
* sdcc gets the lib path correct based on the modelKeith Packard2009-03-15
* Bump debug speed back upKeith Packard2009-03-15
* Only flip changing bits in async modeKeith Packard2009-03-07
* The debug port only works if reset is higher than clock. weirdKeith Packard2009-03-07
* Make manual bit flipping sync after every transactionKeith Packard2009-03-07
* Add ccmanualKeith Packard2009-03-07
* Sync after manual bit readingKeith Packard2009-03-07
* Flip debug pins around to match telemetrumKeith Packard2009-03-07
* Wait for a while when switching the RESET_N lineKeith Packard2009-03-06
* minor s51.1 formatting fixesBdale Garbee2009-03-02
* Add s51 manual.Keith Packard2009-03-01
* Sometimes the link breaks and the GET_PC command returns garbageKeith Packard2009-03-01
* Support 'set' commandKeith Packard2009-01-25
* Expose ccdbg_set_clock APIKeith Packard2009-01-05
* Use custom sdcc libraries (this needs to be configured...)Keith Packard2009-01-05
* Have S51 ignore SIGINT while running under sdcdb.Keith Packard2009-01-05
* Add simple and timer sample programsKeith Packard2008-12-30
* Save/restore registers to host during memory operations. Cache ROM data.Keith Packard2008-12-30
* Fix flashing less than a full page of data. Verify page at a time.Keith Packard2008-12-29
generated by cgit v1.2.3 (git 2.39.1) at 2026-02-20 09:38:13 +0000