summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
...
* | altos/flash-loader: Check memory addresses against flash spaceKeith Packard2014-05-12
* | altos/stm: Use #define'd constants for GPIO register addressesKeith Packard2014-05-12
* | altos/stm: Figure out available flash space based on chip id registersKeith Packard2014-05-12
* | altos/stm: White space fix in ao_boot_pin.cKeith Packard2014-05-12
* | altos/stm: Use flash address of boot loader instead of 0x0Keith Packard2014-05-12
* | altos: Assume all LPC products will have 32KB of flashKeith Packard2014-05-12
* | altos: Report amount of program space available in the version commandKeith Packard2014-05-12
* | altos: Add LED test command to pca9922 driverKeith Packard2014-05-12
* | ao-bringup: Use official binaries for EasyMini turnonKeith Packard2014-05-12
* | ao-bringup: test-baro should accept altitudes a bit below sea levelKeith Packard2014-05-12
* | atosui: Hide Callsign and RSSI tabs for devices without a radioKeith Packard2014-05-12
* | altos: Simplify quadrature trackingKeith Packard2014-05-09
* | altos: Clean up trailing whitespace in ao_pad.cKeith Packard2014-05-08
* | altos: Fix byte offsets in the mega AO_LOG_FLIGHT packetsKeith Packard2014-05-08
* | altos: ublox driver always offers course data when it has a fixKeith Packard2014-05-08
* | altosui: Add GPS course, ground speed and climb rate to graphsKeith Packard2014-05-08
* | altoslib: Parse remaining mega AO_LOG_FLIGNT and AO_LOG_GPS_TIME fieldsKeith Packard2014-05-08
* | altoslib: Add a comment to remind us to fix the IMU code to deal with calibra...Keith Packard2014-05-08
* | altos: 8051 64 * 16 multiply function was broken for negative 64-bitKeith Packard2014-05-08
|/
* relay control implemented, this project is now completeBdale Garbee2014-05-08
* first cut of usbrelay-v0.1 support .. LEDs wiggle, not switching relay yetBdale Garbee2014-05-08
* altosui: Add configuration UI for beeper toneKeith Packard2014-05-02
* altos: Add configurable beep toneKeith Packard2014-05-02
* altos: For telelco discovery packets, retry 5 times with shorter timeoutKeith Packard2014-04-30
* ao-tools: Clean up ao-sym structure an initializersKeith Packard2014-04-30
* ao-load: Make ao_sym static to avoid collision with ao-editaltosKeith Packard2014-04-30
* ao-telem: Dump orientation field from TeleMega sensor telemetry packetKeith Packard2014-04-30
* altosui: Mark TeleMega additional pyro ignitor fired points in graphsKeith Packard2014-04-30
* altoslib: Track pyro firing state when reading mega eeprom filesKeith Packard2014-04-30
* altosui: Add extra ignitors to graphable objectsKeith Packard2014-04-29
* ugly hack (just make sleep longer) to work around ttyACM* discovery issueBdale Garbee2014-04-13
* altos: Switch beeping to farnsworth spacingKeith Packard2014-04-12
* altosuilib: Make lines in graphs 2 units wideKeith Packard2014-04-12
* altoslib/altosui/altosuilib/libaltos: Remove trailing whitespaceKeith Packard2014-04-11
* altos: Add 'microwater' productKeith Packard2014-04-11
* altosui: Disable flight log configuration while flights are storedKeith Packard2014-04-06
* altos: Fix nanopeak compileKeith Packard2014-04-06
* altos: Provide stable binaries for MicroPeakKeith Packard2014-04-06
* altos: Replace C code attiny async output with inline asmKeith Packard2014-04-06
* altos: Build TeleBalloon v2.0 by defaultKeith Packard2014-04-05
* ao-bringup: Split out easymini test into separate scriptKeith Packard2014-04-05
* altosui: Add ignitor tab for TeleMega extra ignitorsKeith Packard2014-04-05
* doc: Document new voltage beeping at startup timeKeith Packard2014-04-05
* Bump version to 1.3.3Keith Packard2014-04-05
* altos: Report battery voltage instead of S at startupKeith Packard2014-04-05
* doc: Outline files are now generated, so don't put them in gitKeith Packard2014-04-05
* ao-tools: Wait for device to become ready instead of failingKeith Packard2014-04-05
* ao-tools: Use 'program' command in ao-flash-lpc instead of 'flash'Keith Packard2014-04-05
* ao-bringup: Get turnon_telemini workingKeith Packard2014-04-05
* altos: Rename 'core' to 'kernel'Keith Packard2014-04-05