summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
...
* altos/telebt-v3.0: Add send_packet commandKeith Packard2017-05-19
* altos/telebt-v4.0: Remove HAS_POLLCHARKeith Packard2017-05-19
* ao-bringup: turnon_chaoskey: search for ao-usbload in PATHKeith Packard2017-05-19
* altos/telefireone-v1.0: Fix confusing defines about config storageKeith Packard2017-05-19
* altoslib: Set default accel cal for old TeleMetrum v1 filesKeith Packard2017-05-15
* altoslib: Set default log format to FULL until we learn differentKeith Packard2017-05-15
* altoslib: Mark AltosConfigData fields as MISSING until setKeith Packard2017-05-15
* re-brand current telefiretwo product as telefireoneBdale Garbee2017-05-15
* altos/ao_rn4678: Send '$$$' for new devices. Fix name setting code.Keith Packard2017-05-15
* altos/stmf: Fix up serial port flow control configuration bitsKeith Packard2017-05-15
* libaltos: Add support for TeleBT-v4.0 bluetooth channel changeKeith Packard2017-05-13
* altoslib: Handle TeleBT v4.0 battery voltageKeith Packard2017-05-13
* altos/telebt-v4.0: Hook up RN4678 moduleKeith Packard2017-05-13
* altos: Add RN4678 Bluetooth module driverKeith Packard2017-05-13
* Use SDP to locate the service channel on LinuxKeith Packard2017-05-13
* altoslib: Another bit of altoslib for the old eeprom stuffKeith Packard2017-05-13
* have AltosGraph use new AltosPressure to get imperial_units workingBdale Garbee2017-05-11
* initial tests made using Terry's stand with a 2500psi sensorBdale Garbee2017-05-11
* telefiretwo: don't try to record pre-burn sensor values in FLIGHT recordBdale Garbee2017-05-11
* have git ignore ao-bringup/cal_valuesBdale Garbee2017-05-11
* telegps: use new eeprom reading codeBdale Garbee2017-05-10
* altoslib: Remove older eeprom handling codeKeith Packard2017-05-09
* altoslib: Save eeprom data in new .eeprom formatKeith Packard2017-05-09
* altosui: Use new eeprom reading codeKeith Packard2017-05-09
* altoslib: Hack up AltosEepromFile to support new eeprom codeKeith Packard2017-05-09
* altoslib: Compile AltosForce and AltosPressureKeith Packard2017-05-09
* altoslib: Add new eeprom management codeKeith Packard2017-05-09
* altoslib: Add set_config_data to AltosStateKeith Packard2017-05-09
* altoslib: Add empty constructor for AltosPyro for JSONKeith Packard2017-05-09
* altoslib: Add Ms5607 constructor that just takes config_dataKeith Packard2017-05-09
* altoslib: Add AltosForce and AltosPressure unitsKeith Packard2017-05-09
* altoslib: Hide members from json by prefixing with __Keith Packard2017-05-09
* altos/telemini-v3.0: Use dbg connector pin 5 for force bootloaderKeith Packard2017-05-04
* altos/telemini-v3.0: Add 'recovery mode' on PA14 (pin 6 on dbg header)Keith Packard2017-05-04
* altos: Move 'ao_force_freq' to ao_config.cKeith Packard2017-05-04
* altos: Make CDC ACM 'line coding' publicKeith Packard2017-05-04
* altoslib: Fix MS5607 raw data to pressure conversion functionMiguel Benavidez2017-05-04
* altos/telebt-v4.0 Set CPU clock to 48Mhz instead of 96MhzBdale Garbee2017-05-03
* altos/telegps-v2.0: Disable external serial port to save ROMKeith Packard2017-05-02
* altos/stmf0: Add code to use SoC flash as storageKeith Packard2017-05-02
* altos/telegps-v2.0: Reorder initialization sequenceKeith Packard2017-04-30
* altos/telegps-v2.0: CC1200 CS is PA1, not PA5.Keith Packard2017-04-30
* altos/telegps-v2.0: GPS chip is connected to serial 2, not serial 1Keith Packard2017-04-30
* altos/telegps-v2.0: Remove some unneeded definesKeith Packard2017-04-30
* altos/telegps-v2.0: Battery ADC input is on PB1, not PA0Keith Packard2017-04-30
* altos/telegps-v2.0: Set CPU clock to 48MHz instread of 96MHzKeith Packard2017-04-30
* altos/telegps-v2.0: Adjust LED configKeith Packard2017-04-30
* altos/kernel: Allow TeleGPS v2 to scale battery in telemKeith Packard2017-04-30
* src/kernel: Add GPS lock blink LED to tracker codeKeith Packard2017-04-30
* altos: Build MicroPeak-v2.0 by defaultKeith Packard2017-04-28
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 13:02:26 +0000