summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* altos, altosui: Add igniter mode (dual, apogee, main)split-telemetryKeith Packard2011-07-17
| | | | | | This provides for redundant charges for either apogee or main. Signed-off-by: Keith Packard <keithp@keithp.com>
* Set version to 0.9.4.4Keith Packard2011-07-17
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* Set version to 0.9.4.3 for Bdale 2011-7-16 flights0.9.4.3Keith Packard2011-07-15
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: new versions of sdcc require __ prefixes for custom keywordsKeith Packard2011-07-09
| | | | | | | Fortunately, 2.9.1 appears to accept either, so we can switch now and prepare for sdcc 3.0.0. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Don't show missing igniter and gps valuesKeith Packard2011-07-06
| | | | | | | | | | | The new telemetry stuff leaves state.gps always set (but empty), which seems fine, we just need to look at state.gps.connected to see if there's a GPS receiver on board. For TeleNano, we also want to hide the igniter status fields as they won't have any data present. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Build device constants into .java codeKeith Packard2011-07-06
| | | | | | | | This eliminates a depedency on updates to the system helper library, which means we don't have to provide a new library on all platforms just to support a new USB id. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: product defines are always in ao_product.hKeith Packard2011-07-06
| | | | | | | | | | | When all products were built in a single directory, each one had a separate version of ao_product.h. Now that they all reside in sub-directories, each directory has its own ao_product.h This change is needed so that other modules in the system can use the product defines; otherwise, ao_product.h was not built at the right time. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Ensure low-rate telem packets interleave with sensor telem packetsKeith Packard2011-07-06
| | | | | | | | | To avoid over-committing the radio link, we want to send only one low rate packet after each sensor packet. However, the initializations for this were incorrect, causing the configuration and location packets to be sent at the same time. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Remove ao_telemetry_orig.c and ao_telemetry_tiny.cKeith Packard2011-07-06
| | | | | | All products use the common ao_telemetry.c code now Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch Tm and Tn to common telemetry codeKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch flash drivers __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_flight and ao_flight_nano __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_dbg.c __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_config.c __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: switch ao_cmd __xdata to __pdataKeith Packard2011-07-06
| | | | | | Saves code space Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch const for __code in struct ao_cmdsKeith Packard2011-07-06
| | | | | | This saves quite a bit of code space when accessing these values. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_usb.c __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_telemetry.c __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_stdio.c __data to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_serial.c __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_sample.c __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_rssi.c __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_report.c __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_log.c and ao_log_big.c __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_ignite and ao_gps_sirf __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Switch ao_gps_skytraq and ao_gps_sirf __xdata to __pdataKeith Packard2011-07-06
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Shrink ao_add_task by rolling up a memset loopKeith Packard2011-07-06
| | | | | | | This has a dramatic effect. By pulling the 'stack' variable into registers it reduces the size of this function from 550 to 231 bytes. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Shrink ao_config_callsign_setKeith Packard2011-07-06
| | | | | | | Replacing a hand-coded memset with a function call, using static space instead of stack space for an array. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Shrink ao_cmd_put16, ao_cmd_hex and ao_cmdKeith Packard2011-07-06
| | | | | | No functional changes, just reduces code size. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Compress telemetry records marked with the same timeKeith Packard2011-07-05
| | | | | | | Split telemetry transmits multiple packets with the same timestamp. Merge those into a single record when read from a file. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Remove debug printf.Keith Packard2011-07-05
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Add main/drogue voltages to default graphKeith Packard2011-07-05
| | | | | | | Until we get a UI for changing the graph elements, lets add a few more potentially useful values. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Elide missing values from graphsKeith Packard2011-07-05
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Elide nul bytes at end of telemetry string valuesKeith Packard2011-07-05
| | | | | | | All telemetry fields are fixed length, so any embedded strings are padded with nul bytes. Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Add section about TeleDongle USB line formatKeith Packard2011-07-05
| | | | | | | Describe the format of the TELEM lines sent over USB from TeleDongle to the host. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Adapt to changes in telemetry Configuration packetKeith Packard2011-07-05
| | | | | | Apogee delay added. flight_log_max changed to two bytes (in kB now). Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Chang Config and Location packetsKeith Packard2011-07-05
| | | | | | | | | Config packets get apogee delay, and have flight_log_max shrunk to two bytes. Location packets get climb_rate added. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Parse remaining standard telemetry packetsKeith Packard2011-07-05
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Complete new telemetry switchoverKeith Packard2011-07-04
| | | | | | | | | | | | | | This involved rewriting the GPS code to use the telemetry structures directly so that a memcpy could be used to transfer the data to the telemetry packets, saving a bunch of code space, along with fixing up the gps testing programs to deal with the structure changes. In addition, the teledongle code needed to have the monitoring code split into separate radio receiver and USB writer threads as the packets are now back-to-back, and hence come too fast to wait for the USB data to be sent to the host after each one. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add split telemetry codeKeith Packard2011-07-04
| | | | | | | This sends every packet every time, which isn't correct, but should be useful for testing. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Shrink help textKeith Packard2011-07-04
| | | | | | Reduce const space taken by command help text. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add sat info to GPS report commandKeith Packard2011-07-04
| | | | | | Plan to use this to report current flight computer state in idle mode. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Shrink const space in ao_configKeith Packard2011-07-04
| | | | | | | | Eliminate separate 'cmd' and 'help' struct entries. Use \0 trick in cmd strings to eliminate whitespace. Edit help text. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: teledongle does not need ao_packet_slave.cKeith Packard2011-07-04
| | | | | | | TeleDongle doesn't provide slave interfaces, so remove ao_packet_slave from the TD build Signed-off-by: Keith Packard <keithp@keithp.com>
* Version strings must be < 8 bytes longKeith Packard2011-07-04
| | | | | | | The new telemetry packets include the version string, so make sure its less than 8 characters long Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Fix a few minor telemetry doc mistakesKeith Packard2011-07-04
| | | | | | | Multiple 'accel' entries in the Sensor packet. Swap ground_accel and ground_pres to group accel cal data Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Complete initial telemetry descriptionKeith Packard2011-07-04
| | | | | | | Finish describing the contents and modulation scheme for telemetry data. Signed-off-by: Keith Packard <keithp@keithp.com>
* doc: Add telemetry format descriptionKeith Packard2011-07-02
| | | | | | Document the telemetry packet contents. Signed-off-by: Keith Packard <keithp@keithp.com>
* altosui: Support raw telemetry from TeleDongleKeith Packard2011-06-28
| | | | | | | | | Use raw telemetry frames when TeleDongle supports them, this involves parsing the hex dump of the packet instead of having teledongle take the packet apart. Only the legacy format is working at this point; the altos bits for the new split telemetry frames is not written yet. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: ao_radio_recv needs byte count *including* rssi and statusKeith Packard2011-06-28
| | | | | | That's two more than the actual packet length. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-15 14:35:14 +0000