summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* altos: Disable FAT commands unless requestedKeith Packard2017-04-04
| | | | | | This are debugging commands; don't provide them unless requested Signed-off-by: Keith Packard <keithp@keithp.com>
* telegps-v0.1: Hack up for SDCARD debuggingKeith Packard2017-04-04
| | | | | | Disable everything not SDCARD related for debugging. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Define CC115L spi speed in each productKeith Packard2017-04-04
| | | | | | | Different SoCs have different SPI speeds available; have each product specify the speed to use instead of trying to use 4Mhz everywhere. Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Add pin definitions for 1802 connectionsKeith Packard2017-04-03
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* stm: Add a few more GPIO functions to make dealing with the 1802 easierKeith Packard2017-04-03
| | | | | | ao_gpio_set_mask and ao_gpio_get_all Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Make bit flipping array constantKeith Packard2017-04-03
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: doodling with 1802 bitsKeith Packard2017-04-03
| | | | | | Just some random ideas about how to manage the 1802 Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Add bit flipping array generatorKeith Packard2017-04-02
| | | | | | | Someone hooked up the data lines between the systems backwards, so we get to swizzle the bits in software. Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Hook up hex keypad using matrix input driverKeith Packard2017-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Allow buttons to be high when pressed rather than lowKeith Packard2017-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: add button matrix driverKeith Packard2017-04-02
| | | | | | Scans the matrix once per clock tick queuing events for changed keys. Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Hook up AS1107 in test modeKeith Packard2017-04-02
| | | | | | Provide a 'L' command to display values Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add AS1107 LED display driverKeith Packard2017-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Add buttonsKeith Packard2017-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Add serialblather command.Keith Packard2017-04-02
| | | | | | This reads from stdin and dumps it to both serial ports until you type ~ Signed-off-by: Keith Packard <keithp@keithp.com>
* lisp: Fix up lisp build so projects can get ao_lisp_const.h built as neededKeith Packard2017-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* stm: Use common flash wait loop instead of inliningKeith Packard2017-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf: Add lisp interpreterKeith Packard2017-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Use new memory map to access all flash and ram. Add fat.Keith Packard2017-04-02
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Hook up serial consoles for debuggingKeith Packard2017-04-02
| | | | | | This will make playing with serial ports easier for now. Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Fix clock to drive VGA at 640/480. Add sdcard, remove othersKeith Packard2017-04-02
| | | | | | VGA requires the CPU to run at 24MHz. Signed-off-by: Keith Packard <keithp@keithp.com>
* cortexelf-v1: Add ps/2 and vga with graphicsKeith Packard2017-04-02
| | | | | | Start hooking up devices with known drivers. Signed-off-by: Keith Packard <keithp@keithp.com>
* capture pnpservo makefiles tooBdale Garbee2017-04-02
|
* makefiles tooBdale Garbee2017-04-02
|
* initial skeleton of CortexELF supportBdale Garbee2017-04-02
|
* first rough cut at skeleton of code for pnpservo .. altos boots and runsBdale Garbee2017-04-01
|
* doc: Rename telemini doc file from telemini-v1.0.inc to telemini.incKeith Packard2017-03-05
| | | | | | This file now contains information on both TeleMini versions. Signed-off-by: Keith Packard <keithp@keithp.com>
* ao-tools/ao-flash-stm: Use openocd instead of st-utilsKeith Packard2017-03-05
| | | | | | | openocd upstream and debian package can both flash stm32l processors, so use that in preference to st-flash. Signed-off-by: Keith Packard <keithp@keithp.com>
* ao-tools/ao-flash-lpc: Adapt to current openocd LPC supportKeith Packard2017-03-02
| | | | | | | | | | | | | Openocd 0.9.0 has generalized the lpc11xx support for all lpc11xx processors, not just the lpc11u14. This replaces the specific lpc11u14.cfg with the general lpc11xx.cfg file. Unlike the build we were using, this doesn't adjust the 'verify' command to adapt for the checksum which gets added during the flashing process. Hence, we disable verification and trust that if the flash loader works to load the OS, it's fine. Signed-off-by: Keith Packard <keithp@keithp.com>
* telemini outline svg had wrong version numberKeith Packard2017-03-01
|
* Add initial TeleMini v3 docsKeith Packard2017-03-01
| | | | | | Uses pictures of the prototype. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/nucleo-32: Update lisp files, add beeper supportKeith Packard2017-02-20
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/lisp: Not quite ready to start making it look like scheme yetKeith Packard2017-02-20
| | | | | | Lots more code to write before these symbols can be exposed. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Support timer 2/3 for the beeperKeith Packard2017-02-20
| | | | | | Tested on timer 2, all four channels. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stmf0: Support tim1 beeper channel other than 3Keith Packard2017-02-20
| | | | | | ch1 was broken and ch2 didn't have any code at all. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/telemini-v3.0: Add beeper defines needed for more general beeper codeKeith Packard2017-02-20
| | | | | | The beeper code now wants to know which timer, port and pin are in use. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add stm-vga demo projectKeith Packard2017-02-20
| | | | | | Uses the VGA and PS/2 drivers to provide an interactive console. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Add draw and lisp to make search paths.Keith Packard2017-02-20
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add console driver using VGA and PS/2Keith Packard2017-02-20
| | | | | | Provides an interactive text console. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add PS/2 keyboard driverKeith Packard2017-02-20
| | | | | | Interrupt driven, includes standard US keymap. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add VGA driver for STM32L processorsKeith Packard2017-02-20
| | | | | | | Generates vsync/hsync using timers and pixel data using the SPI port. 320x240 video using 640x480 mode and a 24MHz "pixel" clock. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Add bitmap drawing codeKeith Packard2017-02-20
| | | | | | Includes solid fills, text and lines. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Add nvic priority register fields. Add more TIM234 defines.Keith Packard2017-02-20
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Make i2c code handle PCLK1 of 24MHzKeith Packard2017-02-20
| | | | | | Just adds the necessary defines to the code. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Allow DMA channels to be hijacked by other codeKeith Packard2017-02-20
| | | | | | | This lets code which needs finer control over DMA to use the channel without interference, and leaves the DMA engine running so that it can. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Allow for console to be used for stdioKeith Packard2017-02-20
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/avr: Avoid warning about unused args in stdio_put and stdio_getKeith Packard2017-02-20
| | | | Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Allow use basepri instead of primask for masking interruptsKeith Packard2017-02-20
| | | | | | | | | | | | This allows for high priority interrupts (priority 0) to run, even when other interrupts are blocked. Code executing in such interrupt handlers must not attempt to control task execution as that will race with the scheduler. Select this by defining AO_NONMASK_INTERRUPT in ao_pins.h. non-maskable interrupt priority is AO_STM_NVIC_NONMASK_PRIORITY Signed-off-by: Keith Packard <keithp@keithp.com>
* altos/stm: Interrupt priority is in the upper bits of the priority maskKeith Packard2017-02-20
| | | | | | | | | | Because the STM32L only offers 16 priority levels, the bottom four bits of each priority mask are not used. All of the interrupt priority settings in the system were using values < 16, making them all effectively the same. Fix that by moving them into the upper 4 bits and using symbolic constants everywhere. Signed-off-by: Keith Packard <keithp@keithp.com>
* altos: Don't wait while idle if trying to minimize interrupt latencyKeith Packard2017-02-20
| | | | | | | | Keeping the scanout running reasonably means keeping interrupt latency constant, and that requires leaving the CPU running. Don't wait for interrupts when the system is running in this mode. Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-23 21:05:10 +0000