summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAge
* Add timer-based beep testKeith Packard2009-04-01
|
* Add readline support to s51Keith Packard2009-03-26
|
* Deal with MSB-outputing DMA engineKeith Packard2009-03-25
|
* Flip ADC bytes aroundKeith Packard2009-03-25
|
* Add spacing for serial adc dataKeith Packard2009-03-25
|
* Inc only one on dest addrKeith Packard2009-03-25
|
* Dump remaining inputsKeith Packard2009-03-25
|
* Remove poll for ti demo buttonKeith Packard2009-03-25
|
* Add adc to serial conversionKeith Packard2009-03-25
|
* Add ADC via DMA exampleKeith Packard2009-03-25
|
* Add DMA exampleKeith Packard2009-03-25
|
* Back to 0dBmKeith Packard2009-03-25
|
* Make radio test compile againKeith Packard2009-03-25
|
* Wait for xtal to stabilizeKeith Packard2009-03-25
|
* Check serial inputKeith Packard2009-03-25
|
* Eliminate array walkingKeith Packard2009-03-25
|
* Add a per-char delayKeith Packard2009-03-25
|
* Use UTX1IF to wait for serial TX completeKeith Packard2009-03-25
|
* Send more interesting textKeith Packard2009-03-25
|
* More random serial bit frobbingKeith Packard2009-03-25
|
* Flip serial TX code around a bitKeith Packard2009-03-25
|
* Try serial polarity high/highKeith Packard2009-03-25
|
* Make serial test simplerKeith Packard2009-03-25
|
* Flip start/stop bits aroundKeith Packard2009-03-25
|
* Stop highKeith Packard2009-03-24
|
* Change radio to -30dBmKeith Packard2009-03-24
|
* Add serial test programKeith Packard2009-03-24
|
* Wait for xtal to stabilize after changing to 24MHzKeith Packard2009-03-24
|
* Actually return byte read from SPIKeith Packard2009-03-24
|
* Clear UxCSR_TX_BYTE after transmitting a byteKeith Packard2009-03-24
|
* Led the LED turn onKeith Packard2009-03-24
|
* actually write and compare SPI test bitsKeith Packard2009-03-24
|
* Add USART-based SPI test codeKeith Packard2009-03-24
|
* Change spi test stringKeith Packard2009-03-24
|
* Oops, not merging in the bit read for SPI testKeith Packard2009-03-24
|
* Adjust clock/data phase for spi testKeith Packard2009-03-24
|
* MISO needs to be an inputKeith Packard2009-03-24
|
* Add bit-banging spi eeprom test programKeith Packard2009-03-24
|
* working beep at around 4khzBdale Garbee2009-03-18
|
* Add simple test program to light up the transmitter at 434.550MHzKeith Packard2009-03-18
| | | | | This starts a transmit sequence, but doesn't send any data so the transmitter just locks on.
* Correctly comment which bit the beep program usesKeith Packard2009-03-15
|
* Add telemetrum beeper exampleKeith Packard2009-03-15
|
* sdcc gets the lib path correct based on the modelKeith Packard2009-03-15
|
* Bump debug speed back upKeith Packard2009-03-15
|
* Only flip changing bits in async modeKeith Packard2009-03-07
|
* The debug port only works if reset is higher than clock. weirdKeith Packard2009-03-07
|
* Make manual bit flipping sync after every transactionKeith Packard2009-03-07
|
* Add ccmanualKeith Packard2009-03-07
|
* Sync after manual bit readingKeith Packard2009-03-07
|
* Flip debug pins around to match telemetrumKeith Packard2009-03-07
|
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-25 04:04:29 +0000