summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
...
| * cqKeith Packard2008-12-18
| * Add ability to load Intel HEX files. Add sample sdcc LED blinker.Keith Packard2008-12-18
| * Add ability to read/write arbitrary memory. Write LED blinker program.Keith Packard2008-12-18
| * Move manual bit-banging debug code to separate fileKeith Packard2008-12-17
| * reduce clock to 50usKeith Packard2008-12-17
| * Fill out ccdbg-command to support all debug commands.Keith Packard2008-12-17
| * Clean up bitbanging layer. Add debug printfs.Keith Packard2008-12-17
| * Clean up sample debug filesKeith Packard2008-12-17
| * Add support for input-only lines (-)Keith Packard2008-12-08
| * Add another exampleKeith Packard2008-12-06
| * Add libusb support and lots more examplesKeith Packard2008-12-06
| * Random hackingKeith Packard2008-11-28
| * Add prototypes, add stub mainline, add .gitignoreKeith Packard2008-11-27
| * cc1111 debug port access through cp2103 serial chipKeith Packard2008-11-27
* Use autotools, move altos to src subdirKeith Packard2009-06-04
* Make menu seperator insensitiveKeith Packard2009-06-04
* aoview: Add eeprom data fetchingKeith Packard2009-06-03
* Stop log dumping at flight end. Print 'end' at end of log.Keith Packard2009-06-03
* Start adding bi-directional packet linkKeith Packard2009-05-31
* Eliminate RDF tone generation.Keith Packard2009-05-28
* Change .gitignore to match new aoload procedureKeith Packard2009-05-28
* Leave serial number writing to aoloadKeith Packard2009-05-27
* Fix aoview telemetry GPS parsing code to use correct columnsKeith Packard2009-05-23
* Parse both telemetry or log data ao_flight_testKeith Packard2009-05-23
* Avoid 16-bit overflow in velocity computation.Keith Packard2009-05-23
* Make file handling more general so it can be reused.Keith Packard2009-05-20
* Ignore aoview_glade.hKeith Packard2009-05-17
* Transmit computed ground pressure and acceleration values0.4Keith Packard2009-05-17
* Provide install targetKeith Packard2009-05-17
* Embed glade file in executableKeith Packard2009-05-17
* Add About dialog to aoview.Keith Packard2009-05-17
* USB device names can contain '.' tooKeith Packard2009-05-17
* scandir returns -1 on errorKeith Packard2009-05-17
* Send computed accel/vel/pres values over the radio0.3Keith Packard2009-05-17
* Handle disappearing serial devicesKeith Packard2009-05-17
* While on the pad, zero out velocity every secondKeith Packard2009-05-17
* Clear table, reset log on disconnectKeith Packard2009-05-17
* Add pad lat/lon, max accel, max heightKeith Packard2009-05-17
* Clean up GPS displayKeith Packard2009-05-17
* Make aoview window tallerKeith Packard2009-05-17
* Add lots more aoview UI bitsKeith Packard2009-05-17
* When logging starts up, right the whole ring to the log.Keith Packard2009-05-16
* Abandon use of accelerometer for apogee detect.Keith Packard2009-05-16
* Add preliminary aoview codesn4-flight2sn4-flight1Keith Packard2009-05-16
* Discard usb output before connection. Handle USB reset.0.2Keith Packard2009-05-13
* Enable radio monitor by default in teleterra, teledongle and tidongleKeith Packard2009-05-13
* Remove monitor/rssi functions from telemetrum loadKeith Packard2009-05-13
* Split out ao_state_names to separate fileKeith Packard2009-05-13
* Indicate RSSI with a blinking LEDKeith Packard2009-05-13
* Make ao_flight_test show AGL altitude and positive acceleration under boostKeith Packard2009-05-13
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-09 16:11:41 +0000