summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
* Correctly comment which bit the beep program usesKeith Packard2009-03-15
* Add telemetrum beeper exampleKeith Packard2009-03-15
* sdcc gets the lib path correct based on the modelKeith Packard2009-03-15
* Bump debug speed back upKeith Packard2009-03-15
* Only flip changing bits in async modeKeith Packard2009-03-07
* The debug port only works if reset is higher than clock. weirdKeith Packard2009-03-07
* Make manual bit flipping sync after every transactionKeith Packard2009-03-07
* Add ccmanualKeith Packard2009-03-07
* Sync after manual bit readingKeith Packard2009-03-07
* Flip debug pins around to match telemetrumKeith Packard2009-03-07
* Wait for a while when switching the RESET_N lineKeith Packard2009-03-06
* minor s51.1 formatting fixesBdale Garbee2009-03-02
* Add s51 manual.Keith Packard2009-03-01
* Sometimes the link breaks and the GET_PC command returns garbageKeith Packard2009-03-01
* Support 'set' commandKeith Packard2009-01-25
* Expose ccdbg_set_clock APIKeith Packard2009-01-05
* Use custom sdcc libraries (this needs to be configured...)Keith Packard2009-01-05
* Have S51 ignore SIGINT while running under sdcdb.Keith Packard2009-01-05
* Add simple and timer sample programsKeith Packard2008-12-30
* Save/restore registers to host during memory operations. Cache ROM data.Keith Packard2008-12-30
* Fix flashing less than a full page of data. Verify page at a time.Keith Packard2008-12-29
* Use SFR access funcs. Support 'dump' command. Add -m (monitor) flag.Keith Packard2008-12-28
* Save/restore regs when reading/writing memory. Add SFR access.Keith Packard2008-12-28
* s51: get start address from ihx file. re-enable breakpoints after reset.Keith Packard2008-12-27
* Switch to libusb-1.0 and use async interface.Keith Packard2008-12-26
* s51: add breakpoints and the ability to block awaiting a breakpoint.Keith Packard2008-12-26
* Add more commands to s51 assembly-language debuggerKeith Packard2008-12-22
* Make read_memory debug output use ccdbg_debug.Keith Packard2008-12-22
* Add preliminary version of s51, a UI clone of the 8051 emulator.Keith Packard2008-12-21
* Cleanup work; separating out the cp interface to be more abstract.Keith Packard2008-12-20
* Clean up autotools stuff.Keith Packard2008-12-19
* Autotools.Keith Packard2008-12-19
* Ignore .ihx filesKeith Packard2008-12-19
* Move blink example to subdirKeith Packard2008-12-19
* Clean up makefiles, move ihx files to .ihxKeith Packard2008-12-19
* ignore more stuffKeith Packard2008-12-19
* Add cc1111 isr stub exampleKeith Packard2008-12-19
* Add blink-tiny flash and ram versionsKeith Packard2008-12-19
* Flash multiple pages. Eliminate off-by-one error in hex_image length.Keith Packard2008-12-19
* Add flash writing code.Keith Packard2008-12-19
* fasterKeith Packard2008-12-18
* cqKeith Packard2008-12-18
* Add ability to load Intel HEX files. Add sample sdcc LED blinker.Keith Packard2008-12-18
* Add ability to read/write arbitrary memory. Write LED blinker program.Keith Packard2008-12-18
* Move manual bit-banging debug code to separate fileKeith Packard2008-12-17
* reduce clock to 50usKeith Packard2008-12-17
* Fill out ccdbg-command to support all debug commands.Keith Packard2008-12-17
* Clean up bitbanging layer. Add debug printfs.Keith Packard2008-12-17
* Clean up sample debug filesKeith Packard2008-12-17
* Add support for input-only lines (-)Keith Packard2008-12-08
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-05 19:08:42 +0000