summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAge
...
| * add new ADC channels for telefiretwoBdale Garbee2017-04-19
| * need top level Makefile tooBdale Garbee2017-04-18
| * builds, loads, runs, not very useful yetBdale Garbee2017-04-18
| * copy telefiretwo-v0.2 to start firmware for v1.0Bdale Garbee2017-04-18
| * telegps-v2.0: Remove fec_tx code and ADC logging.Keith Packard2017-04-13
| * altos/stmf0: Split up rom load in altos.ld to make linker happyKeith Packard2017-04-13
| * cortexelf-v1: Fetch data at TPB rising when MWR or MRD are lowKeith Packard2017-04-13
| * altos/telegps: Inherit LDFLAGS from lpc make specificationKeith Packard2017-04-13
| * initial cut at telegps-v2.0 firmwareBdale Garbee2017-04-13
| * cortexelf-v1: Initialize key matrix codeKeith Packard2017-04-09
| * cortexelf-v1: Bump SPI pin speed to 40MHz to for sdcard. Fix VGA DMA.Keith Packard2017-04-09
| * altos: Use MP switch in cortexelf boot loader for force loader modeKeith Packard2017-04-09
| * altos: Escape lisp REP loop with () inputKeith Packard2017-04-09
| * altos: Document a few more SPI mode bits in VGA driverKeith Packard2017-04-09
| * altos: Drive row low instead of high in matrix driverKeith Packard2017-04-09
| * altos: Place AS1107 in 'normal' mode at end of init sequenceKeith Packard2017-04-09
| * ao-elftohex: Add conditions for skipping ELF sectionsKeith Packard2017-04-09
| * cortexelf-v1: More 1802 noodlingKeith Packard2017-04-04
| * stm: Add more mask-based GPIO controlsKeith Packard2017-04-04
| * altos: Allow programs to enable SDCARD debugging if desiredKeith Packard2017-04-04
| * altos: Disable FAT commands unless requestedKeith Packard2017-04-04
| * telegps-v0.1: Hack up for SDCARD debuggingKeith Packard2017-04-04
| * altos: Define CC115L spi speed in each productKeith Packard2017-04-04
| * cortexelf-v1: Add pin definitions for 1802 connectionsKeith Packard2017-04-03
| * stm: Add a few more GPIO functions to make dealing with the 1802 easierKeith Packard2017-04-03
| * cortexelf-v1: Make bit flipping array constantKeith Packard2017-04-03
| * cortexelf-v1: doodling with 1802 bitsKeith Packard2017-04-03
| * cortexelf-v1: Add bit flipping array generatorKeith Packard2017-04-02
| * cortexelf-v1: Hook up hex keypad using matrix input driverKeith Packard2017-04-02
| * altos: Allow buttons to be high when pressed rather than lowKeith Packard2017-04-02
| * altos: add button matrix driverKeith Packard2017-04-02
| * cortexelf-v1: Hook up AS1107 in test modeKeith Packard2017-04-02
| * altos: Add AS1107 LED display driverKeith Packard2017-04-02
| * cortexelf-v1: Add buttonsKeith Packard2017-04-02
| * cortexelf-v1: Add serialblather command.Keith Packard2017-04-02
| * lisp: Fix up lisp build so projects can get ao_lisp_const.h built as neededKeith Packard2017-04-02
| * stm: Use common flash wait loop instead of inliningKeith Packard2017-04-02
| * cortexelf: Add lisp interpreterKeith Packard2017-04-02
| * cortexelf-v1: Use new memory map to access all flash and ram. Add fat.Keith Packard2017-04-02
| * cortexelf-v1: Hook up serial consoles for debuggingKeith Packard2017-04-02
| * cortexelf-v1: Fix clock to drive VGA at 640/480. Add sdcard, remove othersKeith Packard2017-04-02
| * cortexelf-v1: Add ps/2 and vga with graphicsKeith Packard2017-04-02
| * capture pnpservo makefiles tooBdale Garbee2017-04-02
| * makefiles tooBdale Garbee2017-04-02
| * initial skeleton of CortexELF supportBdale Garbee2017-04-02
| * first rough cut at skeleton of code for pnpservo .. altos boots and runsBdale Garbee2017-04-01
| * doc: Rename telemini doc file from telemini-v1.0.inc to telemini.incKeith Packard2017-03-05
| * ao-tools/ao-flash-stm: Use openocd instead of st-utilsKeith Packard2017-03-05
| * ao-tools/ao-flash-lpc: Adapt to current openocd LPC supportKeith Packard2017-03-02
| * telemini outline svg had wrong version numberKeith Packard2017-03-01
generated by cgit v1.2.3 (git 2.39.1) at 2026-03-27 18:44:41 +0000