diff options
Diffstat (limited to 'src/telelcotwo-v0.1/ao_pins.h')
| -rw-r--r-- | src/telelcotwo-v0.1/ao_pins.h | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/src/telelcotwo-v0.1/ao_pins.h b/src/telelcotwo-v0.1/ao_pins.h new file mode 100644 index 00000000..ce797a38 --- /dev/null +++ b/src/telelcotwo-v0.1/ao_pins.h @@ -0,0 +1,172 @@ +/* + * Copyright © 2012 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef _AO_PINS_H_ +#define _AO_PINS_H_ + +/* 8MHz High speed external crystal */ +#define AO_HSE 8000000 + +/* PLLVCO = 96MHz (so that USB will work) */ +#define AO_PLLMUL 12 +#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) + +#define AO_CC1200_FOSC 40000000 + +/* SYSCLK = 32MHz (no need to go faster than CPU) */ +#define AO_PLLDIV 3 +#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3) + +/* HCLK = 32MHz (CPU clock) */ +#define AO_AHB_PRESCALER 1 +#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 + +/* Run APB1 at 16MHz (HCLK/2) */ +#define AO_APB1_PRESCALER 2 +#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +/* Run APB2 at 16MHz (HCLK/2) */ +#define AO_APB2_PRESCALER 2 +#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +#define HAS_EEPROM 1 +#define USE_INTERNAL_FLASH 1 +#define USE_EEPROM_CONFIG 1 +#define USE_STORAGE_CONFIG 0 +#define HAS_USB 1 +#define HAS_BEEP 1 +#define BEEPER_CHANNEL 4 +#define HAS_RADIO 1 +#define HAS_RADIO_RATE 1 +#define HAS_TELEMETRY 0 +#define HAS_AES 1 +#define HAS_FIXED_PAD_BOX 1 + +#define HAS_SPI_1 0 +#define SPI_1_PA5_PA6_PA7 0 +#define SPI_1_PB3_PB4_PB5 0 +#define SPI_1_PE13_PE14_PE15 0 + +#define HAS_SPI_2 1 /* CC1200 */ +#define SPI_2_PB13_PB14_PB15 1 +#define SPI_2_PD1_PD3_PD4 0 +#define SPI_2_GPIO (&stm_gpiod) +#define SPI_2_SCK 13 +#define SPI_2_MISO 14 +#define SPI_2_MOSI 15 +#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz + +#define HAS_I2C_1 0 + +#define HAS_I2C_2 0 + +#define PACKET_HAS_SLAVE 0 +#define PACKET_HAS_MASTER 0 + +#define FAST_TIMER_FREQ 10000 /* .1ms for debouncing */ + +/* + * Radio is a cc1200 connected via SPI + */ + +#define AO_RADIO_CAL_DEFAULT 5695733 + +#define AO_FEC_DEBUG 0 +#define AO_CC1200_SPI_CS_PORT (&stm_gpioa) +#define AO_CC1200_SPI_CS_PIN 7 +#define AO_CC1200_SPI_BUS AO_SPI_2_PB13_PB14_PB15 +#define AO_CC1200_SPI stm_spi2 + +#define AO_CC1200_INT_PORT (&stm_gpiob) +#define AO_CC1200_INT_PIN (11) + +#define AO_CC1200_INT_GPIO 2 +#define AO_CC1200_INT_GPIO_IOCFG CC1200_IOCFG2 + +#define LOW_LEVEL_DEBUG 0 + +#define LED_PORT_0 (&stm_gpioa) +#define LED_PORT_1 (&stm_gpiob) + +#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOAEN +#define LED_PORT_1_ENABLE STM_RCC_AHBENR_GPIOBEN + +/* Port A, pins 4-6 */ +#define LED_PORT_0_SHIFT 4 +#define LED_PORT_0_MASK 0x7 + +#define LED_PIN_GREEN 0 +#define LED_PIN_AMBER 1 +#define LED_PIN_RED 2 + +#define AO_LED_RED (1 << LED_PIN_RED) +#define AO_LED_AMBER (1 << LED_PIN_AMBER) +#define AO_LED_GREEN (1 << LED_PIN_GREEN) + +/* Port B, pins 3-5 */ +#define LED_PORT_1_SHIFT 0 +#define LED_PORT_1_MASK (0x7 << 3) + +#define LED_PIN_CONTINUITY_1 3 +#define LED_PIN_CONTINUITY_0 4 +#define LED_PIN_REMOTE_ARM 5 + +#define AO_LED_CONTINUITY_1 (1 << LED_PIN_CONTINUITY_1) +#define AO_LED_CONTINUITY_0 (1 << LED_PIN_CONTINUITY_0) + +#define AO_LED_CONTINUITY_NUM 2 + +#define AO_LED_REMOTE_ARM (1 << LED_PIN_REMOTE_ARM) + +#define LEDS_AVAILABLE (AO_LED_RED | \ + AO_LED_AMBER | \ + AO_LED_GREEN | \ + AO_LED_CONTINUITY_1 | \ + AO_LED_CONTINUITY_0 | \ + AO_LED_REMOTE_ARM) + +/* + * Use event queue for input devices + */ + +#define AO_EVENT 1 + +/* + * Buttons + */ + +#define AO_BUTTON_COUNT 3 +#define AO_BUTTON_MODE AO_EXTI_MODE_PULL_UP + +#define AO_BUTTON_0_PORT &stm_gpioa +#define AO_BUTTON_0 0 + +#define AO_BUTTON_ARM_0 0 + +#define AO_BUTTON_1_PORT &stm_gpioa +#define AO_BUTTON_1 1 + +#define AO_BUTTON_ARM_1 1 + +#define AO_BUTTON_ARM_NUM 2 + +#define AO_BUTTON_2_PORT &stm_gpioa +#define AO_BUTTON_2 2 + +#define AO_BUTTON_FIRE 2 + +#endif /* _AO_PINS_H_ */ |