diff options
Diffstat (limited to 'src/stm/ao_timer.c')
| -rw-r--r-- | src/stm/ao_timer.c | 151 |
1 files changed, 92 insertions, 59 deletions
diff --git a/src/stm/ao_timer.c b/src/stm/ao_timer.c index e7f1ddfe..099a0ece 100644 --- a/src/stm/ao_timer.c +++ b/src/stm/ao_timer.c @@ -106,6 +106,53 @@ ao_clock_init(void) uint32_t cfgr; uint32_t cr; + /* Switch to MSI while messing about */ + stm_rcc.cr |= (1 << STM_RCC_CR_MSION); + while (!(stm_rcc.cr & (1 << STM_RCC_CR_MSIRDY))) + asm("nop"); + + /* reset SW, HPRE, PPRE1, PPRE2, MCOSEL and MCOPRE */ + stm_rcc.cfgr &= (uint32_t)0x88FFC00C; + + /* reset HSION, HSEON, CSSON and PLLON bits */ + stm_rcc.cr &= 0xeefefffe; + + /* reset PLLSRC, PLLMUL and PLLDIV bits */ + stm_rcc.cfgr &= 0xff02ffff; + + /* Disable all interrupts */ + stm_rcc.cir = 0; + +#if AO_HSE +#if AO_HSE_BYPASS + stm_rcc.cr |= (1 << STM_RCC_CR_HSEBYP); +#else + stm_rcc.cr &= ~(1 << STM_RCC_CR_HSEBYP); +#endif + /* Enable HSE clock */ + stm_rcc.cr |= (1 << STM_RCC_CR_HSEON); + while (!(stm_rcc.cr & (1 << STM_RCC_CR_HSERDY))) + asm("nop"); + +#define STM_RCC_CFGR_SWS_TARGET_CLOCK (STM_RCC_CFGR_SWS_HSE << STM_RCC_CFGR_SWS) +#define STM_RCC_CFGR_SW_TARGET_CLOCK (STM_RCC_CFGR_SW_HSE) +#define STM_PLLSRC AO_HSE +#define STM_RCC_CFGR_PLLSRC_TARGET_CLOCK (1 << STM_RCC_CFGR_PLLSRC) +#else +#define STM_HSI 16000000 +#define STM_RCC_CFGR_SWS_TARGET_CLOCK (STM_RCC_CFGR_SWS_HSI << STM_RCC_CFGR_SWS) +#define STM_RCC_CFGR_SW_TARGET_CLOCK (STM_RCC_CFGR_SW_HSI) +#define STM_PLLSRC STM_HSI +#define STM_RCC_CFGR_PLLSRC_TARGET_CLOCK (0 << STM_RCC_CFGR_PLLSRC) +#endif + +#if !AO_HSE || HAS_ADC + /* Enable HSI RC clock 16MHz */ + stm_rcc.cr |= (1 << STM_RCC_CR_HSION); + while (!(stm_rcc.cr & (1 << STM_RCC_CR_HSIRDY))) + asm("nop"); +#endif + /* Set flash latency to tolerate 32MHz SYSCLK -> 1 wait state */ /* Enable 64-bit access and prefetch */ @@ -116,6 +163,24 @@ ao_clock_init(void) /* (haven't managed to run the CPU at 32MHz yet, it's at 16MHz) */ stm_flash.acr |= (1 << STM_FLASH_ACR_LATENCY); + /* Enable power interface clock */ + stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_PWREN); + + /* Set voltage range to 1.8V */ + + /* poll VOSF bit in PWR_CSR. Wait until it is reset to 0 */ + while ((stm_pwr.csr & (1 << STM_PWR_CSR_VOSF)) != 0) + asm("nop"); + + /* Configure voltage scaling range */ + cr = stm_pwr.cr; + cr &= ~(STM_PWR_CR_VOS_MASK << STM_PWR_CR_VOS); + cr |= (STM_PWR_CR_VOS_1_8 << STM_PWR_CR_VOS); + stm_pwr.cr = cr; + + /* poll VOSF bit in PWR_CSR. Wait until it is reset to 0 */ + while ((stm_pwr.csr & (1 << STM_PWR_CSR_VOSF)) != 0) + asm("nop"); /* HCLK to 16MHz -> AHB prescaler = /1 */ cfgr = stm_rcc.cfgr; @@ -138,65 +203,6 @@ ao_clock_init(void) cfgr |= (AO_RCC_CFGR_PPRE2_DIV << STM_RCC_CFGR_PPRE2); stm_rcc.cfgr = cfgr; - /* Enable power interface clock */ - stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_PWREN); - - - /* Set voltage range to 1.8V */ - - /* poll VOSF bit in PWR_CSR. Wait until it is reset to 0 */ - while ((stm_pwr.csr & (1 << STM_PWR_CSR_VOSF)) != 0) - asm("nop"); - - /* Configure voltage scaling range */ - cr = stm_pwr.cr; - cr &= ~(STM_PWR_CR_VOS_MASK << STM_PWR_CR_VOS); - cr |= (STM_PWR_CR_VOS_1_8 << STM_PWR_CR_VOS); - stm_pwr.cr = cr; - - /* poll VOSF bit in PWR_CSR. Wait until it is reset to 0 */ - while ((stm_pwr.csr & (1 << STM_PWR_CSR_VOSF)) != 0) - asm("nop"); - -#if AO_HSE - /* Enable HSE clock */ - if (!(stm_rcc.cr & (1 << STM_RCC_CR_HSERDY))) { - stm_rcc.cr |= (1 << STM_RCC_CR_HSEON); - while (!(stm_rcc.cr & (1 << STM_RCC_CR_HSERDY))) - asm("nop"); - } -#define STM_RCC_CFGR_SWS_TARGET_CLOCK (STM_RCC_CFGR_SWS_HSE << STM_RCC_CFGR_SWS) -#define STM_RCC_CFGR_SW_TARGET_CLOCK (STM_RCC_CFGR_SW_HSE) -#define STM_PLLSRC AO_HSE -#define STM_RCC_CFGR_PLLSRC_TARGET_CLOCK (1 << STM_RCC_CFGR_PLLSRC) -#else -#define STM_HSI 16000000 -#define STM_RCC_CFGR_SWS_TARGET_CLOCK (STM_RCC_CFGR_SWS_HSI << STM_RCC_CFGR_SWS) -#define STM_RCC_CFGR_SW_TARGET_CLOCK (STM_RCC_CFGR_SW_HSI) -#define STM_PLLSRC STM_HSI -#define STM_RCC_CFGR_PLLSRC_TARGET_CLOCK (0 << STM_RCC_CFGR_PLLSRC) -#endif - -#if !AO_HSE || HAS_ADC - /* Enable HSI RC clock 16MHz */ - if (!(stm_rcc.cr & (1 << STM_RCC_CR_HSIRDY))) { - stm_rcc.cr |= (1 << STM_RCC_CR_HSION); - while (!(stm_rcc.cr & (1 << STM_RCC_CR_HSIRDY))) - asm("nop"); - } -#endif - /* Switch to direct high speed clock for SYSCLK */ - if ((stm_rcc.cfgr & (STM_RCC_CFGR_SWS_MASK << STM_RCC_CFGR_SWS)) != - STM_RCC_CFGR_SWS_TARGET_CLOCK) { - cfgr = stm_rcc.cfgr; - cfgr &= ~(STM_RCC_CFGR_SW_MASK << STM_RCC_CFGR_SW); - cfgr |= STM_RCC_CFGR_SW_TARGET_CLOCK; - stm_rcc.cfgr = cfgr; - while ((stm_rcc.cfgr & (STM_RCC_CFGR_SWS_MASK << STM_RCC_CFGR_SWS)) != - STM_RCC_CFGR_SWS_TARGET_CLOCK); - asm("nop"); - } - /* Disable the PLL */ stm_rcc.cr &= ~(1 << STM_RCC_CR_PLLON); while (stm_rcc.cr & (1 << STM_RCC_CR_PLLRDY)) @@ -237,4 +243,31 @@ ao_clock_init(void) if (part == val) break; } + +#if 0 + stm_rcc.apb2rstr = 0xffff; + stm_rcc.apb1rstr = 0xffff; + stm_rcc.ahbrstr = 0x3f; + stm_rcc.ahbenr = (1 << STM_RCC_AHBENR_FLITFEN); + stm_rcc.apb2enr = 0; + stm_rcc.apb1enr = 0; + stm_rcc.ahbrstr = 0; + stm_rcc.apb1rstr = 0; + stm_rcc.apb2rstr = 0; +#endif + + /* Clear reset flags */ + stm_rcc.csr |= (1 << STM_RCC_CSR_RMVF); + + + /* Output SYSCLK on PA8 for measurments */ + + stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOAEN); + + stm_afr_set(&stm_gpioa, 8, STM_AFR_AF0); + stm_moder_set(&stm_gpioa, 8, STM_MODER_ALTERNATE); + stm_ospeedr_set(&stm_gpioa, 8, STM_OSPEEDR_40MHz); + + stm_rcc.cfgr |= (STM_RCC_CFGR_MCOPRE_DIV_1 << STM_RCC_CFGR_MCOPRE); + stm_rcc.cfgr |= (STM_RCC_CFGR_MCOSEL_HSE << STM_RCC_CFGR_MCOSEL); } |