diff options
Diffstat (limited to 'src/stm-vga/ao_pins.h')
| -rw-r--r-- | src/stm-vga/ao_pins.h | 205 |
1 files changed, 205 insertions, 0 deletions
diff --git a/src/stm-vga/ao_pins.h b/src/stm-vga/ao_pins.h new file mode 100644 index 00000000..3526cb6c --- /dev/null +++ b/src/stm-vga/ao_pins.h @@ -0,0 +1,205 @@ +/* + * Copyright © 2012 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef _AO_PINS_H_ +#define _AO_PINS_H_ + +/* Bridge SB17 on the board and use the MCO from the other chip */ +#define AO_HSE 8000000 +#define AO_HSE_BYPASS 1 + +/* PLLVCO = 96MHz (so that USB will work) */ +#define AO_PLLMUL 12 +#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) + +/* SYSCLK = 24MHz */ +#define AO_PLLDIV 4 +#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_4) + +/* HCLK = 24MHZ (CPU clock) */ +#define AO_AHB_PRESCALER 1 +#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 + +/* Run APB1 at HCLK/1 */ +#define AO_APB1_PRESCALER 1 +#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_1 + +/* Run APB2 at HCLK/1 */ +#define AO_APB2_PRESCALER 1 +#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_1 + +#define HAS_SERIAL_1 0 +#define USE_SERIAL_1_STDIN 0 +#define SERIAL_1_PB6_PB7 1 +#define SERIAL_1_PA9_PA10 0 + +#define HAS_SERIAL_2 0 +#define USE_SERIAL_2_STDIN 0 +#define SERIAL_2_PA2_PA3 0 +#define SERIAL_2_PD5_PD6 1 + +#define HAS_SERIAL_3 0 +#define USE_SERIAL_3_STDIN 1 +#define SERIAL_3_PB10_PB11 0 +#define SERIAL_3_PC10_PC11 0 +#define SERIAL_3_PD8_PD9 1 + +#define HAS_SPI_1 0 +#define SPI_1_PB3_PB4_PB5 1 +#define SPI_1_OSPEEDR STM_OSPEEDR_10MHz + +#define HAS_SPI_2 0 + +#define HAS_USB 1 +#define HAS_BEEP 0 +#define PACKET_HAS_SLAVE 0 + +#define STM_DMA1_5_STOLEN 1 + +#define AO_BOOT_CHAIN 1 + +#define LOW_LEVEL_DEBUG 0 + +#define LED_PORT_ENABLE STM_RCC_AHBENR_GPIOBEN +#define LED_PORT (&stm_gpiob) +#define LED_PIN_GREEN 7 +#define LED_PIN_BLUE 6 +#define AO_LED_GREEN (1 << LED_PIN_GREEN) +#define AO_LED_BLUE (1 << LED_PIN_BLUE) +#define AO_LED_PANIC AO_LED_BLUE + +#define LEDS_AVAILABLE (AO_LED_BLUE | AO_LED_GREEN) + +#define AO_LCD_STM_SEG_ENABLED_0 ( \ + (1 << 0) | /* PA1 */ \ + (1 << 1) | /* PA2 */ \ + (1 << 2) | /* PA3 */ \ + (0 << 3) | /* PA6 */ \ + (0 << 4) | /* PA7 */ \ + (0 << 5) | /* PB0 */ \ + (0 << 6) | /* PB1 */ \ + (1 << 7) | /* PB3 */ \ + (1 << 8) | /* PB4 */ \ + (1 << 9) | /* PB5 */ \ + (1 << 10) | /* PB10 */ \ + (1 << 11) | /* PB11 */ \ + (1 << 12) | /* PB12 */ \ + (1 << 13) | /* PB13 */ \ + (1 << 14) | /* PB14 */ \ + (1 << 15) | /* PB15 */ \ + (1 << 16) | /* PB8 */ \ + (1 << 17) | /* PA15 */ \ + (1 << 18) | /* PC0 */ \ + (1 << 19) | /* PC1 */ \ + (1 << 20) | /* PC2 */ \ + (1 << 21) | /* PC3 */ \ + (0 << 22) | /* PC4 */ \ + (0 << 23) | /* PC5 */ \ + (1 << 24) | /* PC6 */ \ + (1 << 25) | /* PC7 */ \ + (1 << 26) | /* PC8 */ \ + (1 << 27) | /* PC9 */ \ + (1 << 28) | /* PC10 or PD8 */ \ + (1 << 29) | /* PC11 or PD9 */ \ + (0 << 30) | /* PC12 or PD10 */ \ + (0 << 31)) /* PD2 or PD11 */ + +#define AO_LCD_STM_SEG_ENABLED_1 ( \ + (0 << 0) | /* PD12 */ \ + (0 << 1) | /* PD13 */ \ + (0 << 2) | /* PD14 */ \ + (0 << 3) | /* PD15 */ \ + (0 << 4) | /* PE0 */ \ + (0 << 5) | /* PE1 */ \ + (0 << 6) | /* PE2 */ \ + (0 << 7)) /* PE3 */ + +#define AO_LCD_STM_COM_ENABLED ( \ + (1 << 0) | /* PA8 */ \ + (1 << 1) | /* PA9 */ \ + (1 << 2) | /* PA10 */ \ + (1 << 3) | /* PB9 */ \ + (0 << 4) | /* PC10 */ \ + (0 << 5) | /* PC11 */ \ + (0 << 6)) /* PC12 */ + +#define AO_LCD_28_ON_C 1 + +#define AO_LCD_DUTY STM_LCD_CR_DUTY_STATIC + +#define HAS_ADC 1 + +#define AO_ADC_RING 32 + +struct ao_adc { + uint16_t tick; + int16_t idd; + int16_t temp; + int16_t vref; +}; + +#define AO_ADC_IDD 4 +#define AO_ADC_PIN0_PORT (&stm_gpioa) +#define AO_ADC_PIN0_PIN 4 + +#define AO_ADC_RCC_AHBENR ((1 << STM_RCC_AHBENR_GPIOAEN)) +#define AO_ADC_TEMP 16 +#define AO_ADC_VREF 17 + +#define HAS_ADC_TEMP 1 + +#define AO_DATA_RING 32 +#define AO_NUM_ADC 3 + +#define AO_ADC_SQ1 AO_ADC_IDD +#define AO_ADC_SQ2 AO_ADC_TEMP +#define AO_ADC_SQ3 AO_ADC_VREF + +#define HAS_I2C_1 1 +#define I2C_1_PB6_PB7 0 +#define I2C_1_PB8_PB9 1 + +#define HAS_I2C_2 0 +#define I2C_2_PB10_PB11 0 + +#define AO_EVENT 1 + +#define AO_QUADRATURE_COUNT 2 +#define AO_QUADRATURE_MODE AO_EXTI_MODE_PULL_UP + +#define AO_QUADRATURE_0_PORT &stm_gpioc +#define AO_QUADRATURE_0_A 1 +#define AO_QUADRATURE_0_B 0 + +#define AO_QUADRATURE_1_PORT &stm_gpioc +#define AO_QUADRATURE_1_A 3 +#define AO_QUADRATURE_1_B 2 + +#define AO_BUTTON_COUNT 2 +#define AO_BUTTON_MODE AO_EXTI_MODE_PULL_UP + +#define AO_BUTTON_0_PORT &stm_gpioc +#define AO_BUTTON_0 6 + +#define AO_BUTTON_1_PORT &stm_gpioc +#define AO_BUTTON_1 7 + +#define AO_TICK_TYPE uint32_t +#define AO_TICK_SIGNED int32_t + +#endif /* _AO_PINS_H_ */ |