diff options
Diffstat (limited to 'src/stm-flash/ao_pins.h')
| -rw-r--r-- | src/stm-flash/ao_pins.h | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/src/stm-flash/ao_pins.h b/src/stm-flash/ao_pins.h new file mode 100644 index 00000000..d6c72653 --- /dev/null +++ b/src/stm-flash/ao_pins.h @@ -0,0 +1,79 @@ +/* + * Copyright © 2013 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef _AO_PINS_H_ +#define _AO_PINS_H_ + +#define HAS_TASK_QUEUE 0 + +/* Bridge SB17 on the board and use the MCO from the other chip */ +#define AO_HSE 8000000 +#define AO_HSE_BYPASS 1 + +/* PLLVCO = 96MHz (so that USB will work) */ +#define AO_PLLMUL 12 +#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) + +/* SYSCLK = 32MHz */ +#define AO_PLLDIV 3 +#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3) + +/* HCLK = 32MHZ (CPU clock) */ +#define AO_AHB_PRESCALER 1 +#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 + +/* Run APB1 at HCLK/1 */ +#define AO_APB1_PRESCALER 1 +#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_1 + +/* Run APB2 at HCLK/1 */ +#define AO_APB2_PRESCALER 1 +#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_1 + +#define HAS_USB 1 +#define USE_USB_STDIO 0 +#define HAS_BEEP 0 +#define HAS_TASK 0 +#define HAS_ECHO 0 +#define HAS_TICK 0 + +#define PACKET_HAS_SLAVE 0 + +#define LED_PORT_ENABLE STM_RCC_AHBENR_GPIOCEN +#define LED_PORT (&stm_gpiob) +#define LED_PIN_RED 6 +#define LED_PIN_GREEN 7 +#define AO_LED_RED (1 << LED_PIN_RED) +#define AO_LED_GREEN (1 << LED_PIN_GREEN) + +#define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN) + +#define AO_TICK_TYPE uint32_t +#define AO_TICK_SIGNED int32_t + +#define HAS_TASK_INFO 0 +#define HAS_VERSION 0 + +#define AO_BOOT_CHAIN 1 +#define AO_BOOT_PIN 1 + +#define AO_BOOT_APPLICATION_GPIO stm_gpiod +#define AO_BOOT_APPLICATION_PIN 2 +#define AO_BOOT_APPLICATION_VALUE 1 +#define AO_BOOT_APPLICATION_MODE AO_EXTI_MODE_PULL_UP + +#endif /* _AO_PINS_H_ */ |