diff options
Diffstat (limited to 'src/drivers')
| -rw-r--r-- | src/drivers/ao_at24c.c | 104 | ||||
| -rw-r--r-- | src/drivers/ao_mpu6000.h | 3 | ||||
| -rw-r--r-- | src/drivers/ao_ms5607.c | 70 | ||||
| -rw-r--r-- | src/drivers/ao_ms5607.h | 3 | ||||
| -rw-r--r-- | src/drivers/ao_ms5607_convert.c | 58 | ||||
| -rw-r--r-- | src/drivers/ao_pad.c | 71 | ||||
| -rw-r--r-- | src/drivers/ao_radio_master.c | 2 |
7 files changed, 246 insertions, 65 deletions
diff --git a/src/drivers/ao_at24c.c b/src/drivers/ao_at24c.c new file mode 100644 index 00000000..2a23be3a --- /dev/null +++ b/src/drivers/ao_at24c.c @@ -0,0 +1,104 @@ +/* + * Copyright © 2012 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include <ao.h> + +#if HAS_EEPROM +#define AO_AT24C_ADDR 0xa0 +#define AO_AT24C_ADDR_WRITE (AO_AT24C_ADDR|0) +#define AO_AT24C_ADDR_READ (AO_AT24C_ADDR|1) +#define AO_AT24C_PAGE_LEN 128 + +/* Total bytes of available storage */ +__pdata ao_pos_t ao_storage_total = 64l * 1024l; + +/* Storage unit size - device reads and writes must be within blocks of this size. */ +__pdata uint16_t ao_storage_unit = 128; + +static void +ao_at24c_set_address(uint8_t addr, ao_pos_t pos) +{ + uint8_t a[2]; + + a[0] = pos >> 8; + a[1] = pos; + ao_i2c_start_bus(addr); + ao_i2c_send_bus(a, 2, 0); +} + +/* + * Erase the specified sector + */ +uint8_t +ao_storage_erase(ao_pos_t pos) __reentrant +{ + if (pos >= ao_storage_total || pos + AO_AT24C_PAGE_LEN > ao_storage_total) + return 0; + + ao_mutex_get(&ao_at24c_mutex); + ao_at24c_set_address(AO_AT24C_ADDR_WRITE, pos); + ao_i2c_send_fixed_bus(0xff, AO_AT24C_PAGE_LEN, 1); + ao_mutex_put(&ao_at24c_mutex); + return 1; +} + +/* + * Write to flash + */ +uint8_t +ao_storage_device_write(ao_pos_t pos, __xdata void *d, uint16_t len) __reentrant +{ + if (pos >= ao_storage_total || pos + len > ao_storage_total) + return 0; + + ao_mutex_get(&ao_m25_mutex); + ao_at24c_set_address(AO_AT24C_ADDR_WRITE, pos); + ao_i2c_send_bus(d, len, 1); + ao_mutex_put(&ao_m25_mutex); + return 1; +} + +/* + * Read from flash + */ +uint8_t +ao_storage_device_read(ao_pos_t pos, __xdata void *d, uint16_t len) __reentrant +{ + if (pos >= ao_storage_total || pos + len > ao_storage_total) + return 0; + ao_mutex_get(&ao_m25_mutex); + ao_at24c_set_address(AO_AT24C_ADDR_READ, pos); + ao_i2c_recv_bus(d, len, 1); + ao_mutex_put(&ao_m25_mutex); + return 1; +} + +void +ao_storage_flush(void) __reentrant +{ +} + +void +ao_storage_setup(void) +{ +} + +void +ao_storage_device_init(void) +{ +} +#endif diff --git a/src/drivers/ao_mpu6000.h b/src/drivers/ao_mpu6000.h index ab36d6f2..6aada9a9 100644 --- a/src/drivers/ao_mpu6000.h +++ b/src/drivers/ao_mpu6000.h @@ -145,6 +145,9 @@ /* Self test gyro is approximately 50°/s */ #define MPU6000_ST_GYRO(full_scale) ((int16_t) (((int32_t) 32767 * (int32_t) 50) / (full_scale))) +#define MPU6000_GYRO_FULLSCALE 2000 +#define MPU6000_ACCEL_FULLSCALE 16 + struct ao_mpu6000_sample { int16_t accel_x; int16_t accel_y; diff --git a/src/drivers/ao_ms5607.c b/src/drivers/ao_ms5607.c index 736e115b..077a40e6 100644 --- a/src/drivers/ao_ms5607.c +++ b/src/drivers/ao_ms5607.c @@ -17,7 +17,7 @@ #include <ao.h> #include <ao_exti.h> -#include "ao_ms5607.h" +#include <ao_ms5607.h> #if HAS_MS5607 || HAS_MS5611 @@ -27,12 +27,12 @@ static uint8_t ms5607_configured; static void ao_ms5607_start(void) { ao_spi_get(AO_MS5607_SPI_INDEX,AO_SPI_SPEED_FAST); - stm_gpio_set(AO_MS5607_CS_PORT, AO_MS5607_CS_PIN, 0); + ao_gpio_set(AO_MS5607_CS_PORT, AO_MS5607_CS_PIN, AO_MS5607_CS, 0); } static void ao_ms5607_stop(void) { - stm_gpio_set(AO_MS5607_CS_PORT, AO_MS5607_CS_PIN, 1); + ao_gpio_set(AO_MS5607_CS_PORT, AO_MS5607_CS_PIN, AO_MS5607_CS, 1); ao_spi_put(AO_MS5607_SPI_INDEX); } @@ -53,7 +53,6 @@ ao_ms5607_crc(uint8_t *prom) uint8_t crc_byte = prom[15]; uint8_t cnt; uint16_t n_rem = 0; - uint16_t crc_read; uint8_t n_bit; prom[15] = 0; @@ -89,9 +88,11 @@ ao_ms5607_prom_read(struct ao_ms5607_prom *prom) } crc = ao_ms5607_crc((uint8_t *) prom); if (crc != (((uint8_t *) prom)[15] & 0xf)) { +#if HAS_TASK printf ("MS5607 PROM CRC error (computed %x actual %x)\n", crc, (((uint8_t *) prom)[15] & 0xf)); flush(); +#endif ao_panic(AO_PANIC_SELF_TEST_MS5607); } @@ -105,7 +106,7 @@ ao_ms5607_prom_read(struct ao_ms5607_prom *prom) #endif } -static void +void ao_ms5607_setup(void) { if (ms5607_configured) @@ -115,33 +116,34 @@ ao_ms5607_setup(void) ao_ms5607_prom_read(&ms5607_prom); } -static uint8_t ao_ms5607_done; +static volatile uint8_t ao_ms5607_done; static void ao_ms5607_isr(void) { ao_exti_disable(AO_MS5607_MISO_PORT, AO_MS5607_MISO_PIN); ao_ms5607_done = 1; - ao_wakeup(&ao_ms5607_done); + ao_wakeup((void *) &ao_ms5607_done); } static uint32_t ao_ms5607_get_sample(uint8_t cmd) { uint8_t reply[3]; uint8_t read; - uint16_t now; ao_ms5607_done = 0; ao_ms5607_start(); ao_spi_send(&cmd, 1, AO_MS5607_SPI_INDEX); + ao_exti_enable(AO_MS5607_MISO_PORT, AO_MS5607_MISO_PIN); + #if AO_MS5607_PRIVATE_PINS ao_spi_put(AO_MS5607_SPI_INDEX); #endif cli(); while (!ao_ms5607_done) - ao_sleep(&ao_ms5607_done); + ao_sleep((void *) &ao_ms5607_done); sei(); #if AO_MS5607_PRIVATE_PINS stm_gpio_set(AO_MS5607_CS_PORT, AO_MS5607_CS_PIN, 1); @@ -165,48 +167,9 @@ ao_ms5607_sample(struct ao_ms5607_sample *sample) sample->temp = ao_ms5607_get_sample(AO_MS5607_CONVERT_D2_2048); } -void -ao_ms5607_convert(struct ao_ms5607_sample *sample, struct ao_ms5607_value *value) -{ - uint8_t addr; - int32_t dT; - int32_t TEMP; - int64_t OFF; - int64_t SENS; - int32_t P; - - dT = sample->temp - ((int32_t) ms5607_prom.tref << 8); - - TEMP = 2000 + (((int64_t) dT * ms5607_prom.tempsens) >> 23); - -#if HAS_MS5611 - OFF = ((int64_t) ms5607_prom.off << 16) + (((int64_t) ms5607_prom.tco * dT) >> 7); - SENS = ((int64_t) ms5607_prom.sens << 15) + (((int64_t) ms5607_prom.tcs * dT) >> 8); -#else - OFF = ((int64_t) ms5607_prom.off << 17) + (((int64_t) ms5607_prom.tco * dT) >> 6); - SENS = ((int64_t) ms5607_prom.sens << 16) + (((int64_t) ms5607_prom.tcs * dT) >> 7); -#endif - - if (TEMP < 2000) { - int32_t T2 = ((int64_t) dT * (int64_t) dT) >> 31; - int32_t TEMPM = TEMP - 2000; - int64_t OFF2 = (61 * (int64_t) TEMPM * (int64_t) TEMPM) >> 4; - int64_t SENS2 = 2 * (int64_t) TEMPM * (int64_t) TEMPM; - if (TEMP < 1500) { - int32_t TEMPP = TEMP + 1500; - int64_t TEMPP2 = TEMPP * TEMPP; - OFF2 = OFF2 + 15 * TEMPP2; - SENS2 = SENS2 + 8 * TEMPP2; - } - TEMP -= T2; - OFF -= OFF2; - SENS -= SENS2; - } - - value->pres = ((((int64_t) sample->pres * SENS) >> 21) - OFF) >> 15; - value->temp = TEMP; -} +#include "ao_ms5607_convert.c" +#if HAS_TASK struct ao_ms5607_sample ao_ms5607_current; static void @@ -253,15 +216,18 @@ __code struct ao_cmds ao_ms5607_cmds[] = { { ao_ms5607_dump, "B\0Display MS5607 data" }, { 0, NULL }, }; +#endif /* HAS_TASK */ void ao_ms5607_init(void) { ms5607_configured = 0; - ao_cmd_register(&ao_ms5607_cmds[0]); ao_spi_init_cs(AO_MS5607_CS_PORT, (1 << AO_MS5607_CS_PIN)); +#if HAS_TASK + ao_cmd_register(&ao_ms5607_cmds[0]); ao_add_task(&ao_ms5607_task, ao_ms5607, "ms5607"); +#endif /* Configure the MISO pin as an interrupt; when the * conversion is complete, the MS5607 will raise this @@ -272,12 +238,14 @@ ao_ms5607_init(void) AO_EXTI_MODE_RISING, ao_ms5607_isr); +#ifdef STM_MODER_ALTERNATE /* Reset the pin from INPUT to ALTERNATE so that SPI works * This needs an abstraction at some point... */ stm_moder_set(AO_MS5607_MISO_PORT, AO_MS5607_MISO_PIN, STM_MODER_ALTERNATE); +#endif } #endif diff --git a/src/drivers/ao_ms5607.h b/src/drivers/ao_ms5607.h index 4c29f6a7..b2f98a59 100644 --- a/src/drivers/ao_ms5607.h +++ b/src/drivers/ao_ms5607.h @@ -59,6 +59,9 @@ struct ao_ms5607_value { extern struct ao_ms5607_sample ao_ms5607_current; void +ao_ms5607_setup(void); + +void ao_ms5607_init(void); void diff --git a/src/drivers/ao_ms5607_convert.c b/src/drivers/ao_ms5607_convert.c new file mode 100644 index 00000000..e61d19ed --- /dev/null +++ b/src/drivers/ao_ms5607_convert.c @@ -0,0 +1,58 @@ +/* + * Copyright © 2012 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include <ao_ms5607.h> + +void +ao_ms5607_convert(struct ao_ms5607_sample *sample, struct ao_ms5607_value *value) +{ + int32_t dT; + int32_t TEMP; + int64_t OFF; + int64_t SENS; + + dT = sample->temp - ((int32_t) ms5607_prom.tref << 8); + + TEMP = 2000 + (((int64_t) dT * ms5607_prom.tempsens) >> 23); + +#if HAS_MS5611 + OFF = ((int64_t) ms5607_prom.off << 16) + (((int64_t) ms5607_prom.tco * dT) >> 7); + SENS = ((int64_t) ms5607_prom.sens << 15) + (((int64_t) ms5607_prom.tcs * dT) >> 8); +#else + OFF = ((int64_t) ms5607_prom.off << 17) + (((int64_t) ms5607_prom.tco * dT) >> 6); + SENS = ((int64_t) ms5607_prom.sens << 16) + (((int64_t) ms5607_prom.tcs * dT) >> 7); +#endif + + if (TEMP < 2000) { + int32_t T2 = ((int64_t) dT * (int64_t) dT) >> 31; + int32_t TEMPM = TEMP - 2000; + int64_t OFF2 = (61 * (int64_t) TEMPM * (int64_t) TEMPM) >> 4; + int64_t SENS2 = 2 * (int64_t) TEMPM * (int64_t) TEMPM; + if (TEMP < 1500) { + int32_t TEMPP = TEMP + 1500; + int64_t TEMPP2 = TEMPP * TEMPP; + OFF2 = OFF2 + 15 * TEMPP2; + SENS2 = SENS2 + 8 * TEMPP2; + } + TEMP -= T2; + OFF -= OFF2; + SENS -= SENS2; + } + + value->pres = ((((int64_t) sample->pres * SENS) >> 21) - OFF) >> 15; + value->temp = TEMP; +} diff --git a/src/drivers/ao_pad.c b/src/drivers/ao_pad.c index 55e6289d..6cec98ab 100644 --- a/src/drivers/ao_pad.c +++ b/src/drivers/ao_pad.c @@ -40,24 +40,62 @@ static __pdata uint8_t ao_pad_debug; #endif static void +ao_siren(uint8_t v) +{ +#ifdef AO_SIREN + ao_gpio_set(AO_SIREN_PORT, AO_SIREN_PIN, AO_SIREN, v); +#else + ao_beep(v ? AO_BEEP_MID : 0); +#endif +} + +static void +ao_strobe(uint8_t v) +{ +#ifdef AO_STROBE + ao_gpio_set(AO_STROBE_PORT, AO_STROBE_PIN, AO_STROBE, v); +#endif +} + +static void ao_pad_run(void) { + uint8_t pins; + for (;;) { while (!ao_pad_ignite) ao_sleep(&ao_pad_ignite); /* * Actually set the pad bits */ - AO_PAD_PORT = (AO_PAD_PORT & (~AO_PAD_ALL_PINS)) | ao_pad_ignite; + pins = 0; +#if AO_PAD_NUM > 0 + if (ao_pad_ignite & (1 << 0)) + pins |= (1 << AO_PAD_PIN_0); +#endif +#if AO_PAD_NUM > 1 + if (ao_pad_ignite & (1 << 1)) + pins |= (1 << AO_PAD_PIN_1); +#endif +#if AO_PAD_NUM > 2 + if (ao_pad_ignite & (1 << 2)) + pins |= (1 << AO_PAD_PIN_2); +#endif +#if AO_PAD_NUM > 3 + if (ao_pad_ignite & (1 << 3)) + pins |= (1 << AO_PAD_PIN_3); +#endif + AO_PAD_PORT = (AO_PAD_PORT & (~AO_PAD_ALL_PINS)) | pins; while (ao_pad_ignite) { ao_pad_ignite = 0; + ao_delay(AO_PAD_FIRE_TIME); } AO_PAD_PORT &= ~(AO_PAD_ALL_PINS); } } -#define AO_PAD_ARM_BEEP_INTERVAL 200 +#define AO_PAD_ARM_SIREN_INTERVAL 200 static void ao_pad_monitor(void) @@ -139,22 +177,27 @@ ao_pad_monitor(void) prev = cur; } + if (ao_pad_armed && (int16_t) (ao_time() - ao_pad_arm_time) > AO_PAD_ARM_TIME) + ao_pad_armed = 0; + if (ao_pad_armed) { + ao_strobe(1); if (sample & 2) - ao_beep(AO_BEEP_HIGH); + ao_siren(1); else - ao_beep(AO_BEEP_LOW); + ao_siren(0); beeping = 1; } else if (query.arm_status == AO_PAD_ARM_STATUS_ARMED && !beeping) { if (arm_beep_time == 0) { - arm_beep_time = AO_PAD_ARM_BEEP_INTERVAL; + arm_beep_time = AO_PAD_ARM_SIREN_INTERVAL; beeping = 1; - ao_beep(AO_BEEP_HIGH); + ao_siren(1); } --arm_beep_time; } else if (beeping) { beeping = 0; - ao_beep(0); + ao_siren(0); + ao_strobe(0); } } } @@ -181,7 +224,6 @@ ao_pad(void) int16_t time_difference; int8_t ret; - ao_beep_for(AO_BEEP_MID, AO_MS_TO_TICKS(200)); ao_pad_box = 0; ao_led_set(0); ao_led_on(AO_LED_POWER); @@ -197,9 +239,6 @@ ao_pad(void) PRINTD ("tick %d box %d cmd %d channels %02x\n", command.tick, command.box, command.cmd, command.channels); - if (ao_pad_armed && (int16_t) (ao_time() - ao_pad_arm_time) > AO_PAD_ARM_TIME) - ao_pad_armed = 0; - switch (command.cmd) { case AO_LAUNCH_ARM: if (command.box != ao_pad_box) { @@ -207,7 +246,7 @@ ao_pad(void) break; } - if (command.channels & ~(AO_PAD_ALL_PINS)) + if (command.channels & ~(AO_PAD_ALL_CHANNELS)) break; time_difference = command.tick - ao_time(); @@ -232,7 +271,7 @@ ao_pad(void) query.tick = ao_time(); query.box = ao_pad_box; - query.channels = AO_PAD_ALL_PINS; + query.channels = AO_PAD_ALL_CHANNELS; query.armed = ao_pad_armed; PRINTD ("query tick %d box %d channels %02x arm %d arm_status %d igniter %d,%d,%d,%d\n", query.tick, query.box, query.channels, query.armed, @@ -349,6 +388,12 @@ ao_pad_init(void) #if AO_PAD_NUM > 3 ao_enable_output(AO_PAD_PORT, AO_PAD_PIN_3, AO_PAD_3, 0); #endif +#ifdef AO_STROBE + ao_enable_output(AO_STROBE_PORT, AO_STROBE_PIN, AO_STROBE, 0); +#endif +#ifdef AO_SIREN + ao_enable_output(AO_SIREN_PORT, AO_SIREN_PIN, AO_SIREN, 0); +#endif ao_cmd_register(&ao_pad_cmds[0]); ao_add_task(&ao_pad_task, ao_pad, "pad listener"); ao_add_task(&ao_pad_ignite_task, ao_pad_run, "pad igniter"); diff --git a/src/drivers/ao_radio_master.c b/src/drivers/ao_radio_master.c index 73ac3c03..4a37ace0 100644 --- a/src/drivers/ao_radio_master.c +++ b/src/drivers/ao_radio_master.c @@ -53,7 +53,7 @@ ao_radio_master_start(void) { ao_spi_get_bit(AO_RADIO_CS_PORT, AO_RADIO_CS_PIN, AO_RADIO_CS, AO_RADIO_SPI_BUS, - AO_SPI_SPEED_200kHz); + AO_SPI_SPEED_2MHz); } static void |