diff options
Diffstat (limited to 'src/drivers')
| -rw-r--r-- | src/drivers/ao_btm.c | 144 |
1 files changed, 93 insertions, 51 deletions
diff --git a/src/drivers/ao_btm.c b/src/drivers/ao_btm.c index 9ea638ba..e6b28688 100644 --- a/src/drivers/ao_btm.c +++ b/src/drivers/ao_btm.c @@ -35,7 +35,7 @@ __xdata uint8_t ao_btm_connected; #if BT_DEBUG __xdata char ao_btm_buffer[256]; -int ao_btm_ptr; +uint16_t ao_btm_ptr; char ao_btm_dir; static void @@ -84,6 +84,10 @@ ao_btm_dump(void) putchar(ao_btm_buffer[i]); } putchar('\n'); + ao_cmd_decimal(); + if (ao_cmd_status == ao_cmd_success && ao_cmd_lex_i) + ao_btm_ptr = 0; + ao_cmd_status = ao_cmd_success; } static void @@ -98,9 +102,44 @@ ao_btm_speed(void) ao_cmd_status = ao_cmd_syntax_error; } +static uint8_t ao_btm_enable; + +static void +ao_btm_do_echo(void) +{ + int c; + while (ao_btm_enable) { + ao_arch_block_interrupts(); + while ((c = _ao_serial_btm_pollchar()) == AO_READ_AGAIN && ao_btm_enable) + _ao_serial_btm_sleep(); + ao_arch_release_interrupts(); + if (c != AO_READ_AGAIN) { + putchar(c); + flush(); + } + } + ao_exit(); +} + +static struct ao_task ao_btm_echo_task; + +static void +ao_btm_send(void) +{ + int c; + ao_btm_enable = 1; + ao_add_task(&ao_btm_echo_task, ao_btm_do_echo, "btm-echo"); + while ((c = getchar()) != '~') { + ao_serial_btm_putchar(c); + } + ao_btm_enable = 0; + ao_wakeup((void *) &ao_serial_btm_rx_fifo); +} + __code struct ao_cmds ao_btm_cmds[] = { { ao_btm_dump, "d\0Dump btm buffer." }, { ao_btm_speed, "s <19200,57600>\0Set btm serial speed." }, + { ao_btm_send, "S\0BTM interactive mode. ~ to exit." }, { 0, NULL }, }; @@ -260,6 +299,52 @@ ao_btm_try_speed(uint8_t speed) return 0; } +#if BT_LINK_ON_P2 +#define BT_PICTL_ICON PICTL_P2ICON +#define BT_PIFG P2IFG +#define BT_PDIR P2DIR +#define BT_PINP P2INP +#define BT_IEN2_PIE IEN2_P2IE +#define BT_CC1111 1 +#endif +#if BT_LINK_ON_P1 +#define BT_PICTL_ICON PICTL_P1ICON +#define BT_PIFG P1IFG +#define BT_PDIR P1DIR +#define BT_PINP P1INP +#define BT_IEN2_PIE IEN2_P1IE +#define BT_CC1111 1 +#endif + +void +ao_btm_check_link() +{ +#if BT_CC1111 + ao_arch_critical( + /* Check the pin and configure the interrupt detector to wait for the + * pin to flip the other way + */ + if (BT_LINK_PIN) { + ao_btm_connected = 0; + PICTL |= BT_PICTL_ICON; + } else { + ao_btm_connected = 1; + PICTL &= ~BT_PICTL_ICON; + } + ); +#else + ao_arch_block_interrupts(); + if (ao_gpio_get(AO_BTM_INT_PORT, AO_BTM_INT_PIN, AO_BTM_INT) == 0) { + ao_btm_connected = 1; + } else { + ao_btm_connected = 0; + } + ao_arch_release_interrupts(); +#endif +} + +__xdata struct ao_task ao_btm_task; + /* * A thread to initialize the bluetooth device and * hang around to blink the LED when connected @@ -267,12 +352,6 @@ ao_btm_try_speed(uint8_t speed) void ao_btm(void) { -#ifdef AO_BTM_RESET_PORT - ao_gpio_set(AO_BTM_RESET_PORT, AO_BTM_RESET_PIN, AO_BTM_RESET, 0); - ao_delay(AO_MS_TO_TICKS(20)); - ao_gpio_set(AO_BTM_RESET_PORT, AO_BTM_RESET_PIN, AO_BTM_RESET, 1); -#endif - /* * Wait for the bluetooth device to boot */ @@ -308,6 +387,13 @@ ao_btm(void) NULL); ao_btm_echo(0); + /* Check current pin state */ + ao_btm_check_link(); + +#ifdef AO_BTM_INT_PORT + ao_exti_enable(AO_BTM_INT_PORT, AO_BTM_INT_PIN); +#endif + for (;;) { while (!ao_btm_connected) ao_sleep(&ao_btm_connected); @@ -318,43 +404,6 @@ ao_btm(void) } } -__xdata struct ao_task ao_btm_task; - -#if BT_LINK_ON_P2 -#define BT_PICTL_ICON PICTL_P2ICON -#define BT_PIFG P2IFG -#define BT_PDIR P2DIR -#define BT_PINP P2INP -#define BT_IEN2_PIE IEN2_P2IE -#define BT_CC1111 1 -#endif -#if BT_LINK_ON_P1 -#define BT_PICTL_ICON PICTL_P1ICON -#define BT_PIFG P1IFG -#define BT_PDIR P1DIR -#define BT_PINP P1INP -#define BT_IEN2_PIE IEN2_P1IE -#define BT_CC1111 1 -#endif - -void -ao_btm_check_link() -{ -#if BT_CC1111 - ao_arch_critical( - /* Check the pin and configure the interrupt detector to wait for the - * pin to flip the other way - */ - if (BT_LINK_PIN) { - ao_btm_connected = 0; - PICTL |= BT_PICTL_ICON; - } else { - ao_btm_connected = 1; - PICTL &= ~BT_PICTL_ICON; - } - ); -#endif -} #if BT_CC1111 void @@ -425,13 +474,6 @@ ao_btm_init (void) IEN2 |= BT_IEN2_PIE; #endif - /* Check current pin state */ - ao_btm_check_link(); - -#ifdef AO_BTM_INT_PORT - ao_exti_enable(AO_BTM_INT_PORT, AO_BTM_INT_PIN); -#endif - #if BT_LINK_ON_P2 /* Eable the pin interrupt */ PICTL |= PICTL_P2IEN; |