diff options
Diffstat (limited to 'src/drivers/ao_rn4678.c')
| -rw-r--r-- | src/drivers/ao_rn4678.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/src/drivers/ao_rn4678.c b/src/drivers/ao_rn4678.c index 98dc35b5..4ace4b78 100644 --- a/src/drivers/ao_rn4678.c +++ b/src/drivers/ao_rn4678.c @@ -335,7 +335,7 @@ ao_rn_get_name(char *name, int len) static void ao_rn_check_link(void) { - ao_rn_connected = 1 - ao_gpio_get(AO_RN_CONNECTED_PORT, AO_RN_CONNECTED_PIN, foo); + ao_rn_connected = 1 - ao_gpio_get(AO_RN_CONNECTED_PORT, AO_RN_CONNECTED_PIN); } static void @@ -384,17 +384,17 @@ ao_rn(void) ao_rn_dbg("ao_rn top\n"); /* Select CMD mode after the device gets out of reset */ - ao_gpio_set(AO_RN_CMD_PORT, AO_RN_CMD_PIN, foo, AO_RN_CMD_CMD); + ao_gpio_set(AO_RN_CMD_PORT, AO_RN_CMD_PIN, AO_RN_CMD_CMD); for (i = 0; i < 3; i++) { ao_rn_dbg("reset device\n"); - ao_gpio_set(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, foo, 0); + ao_gpio_set(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, 0); ao_delay(AO_MS_TO_TICKS(100)); /* Reboot the RN4678 and wait for it to start talking */ ao_rn_drain(); - ao_gpio_set(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, foo, 1); + ao_gpio_set(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, 1); status = ao_rn_wait_for(AO_RN_REBOOT_TIMEOUT, AO_RN_REBOOT_MSG); if (status != AO_RN_OK) { ao_rn_dbg("reboot failed\n"); @@ -468,7 +468,7 @@ ao_rn(void) if (status != AO_RN_OK) ao_bt_panic(4); - ao_gpio_set(AO_RN_CMD_PORT, AO_RN_CMD_PIN, foo, AO_RN_CMD_DATA); + ao_gpio_set(AO_RN_CMD_PORT, AO_RN_CMD_PIN, AO_RN_CMD_DATA); /* Wait for the hardware to finish sending messages, then clear the queue */ ao_delay(AO_MS_TO_TICKS(200)); @@ -530,16 +530,16 @@ ao_rn_factory(void) */ /* Select our target output pin */ - ao_enable_output(AO_RN_P3_1_PORT, AO_RN_P3_1_PIN, foo, v); + ao_enable_output(AO_RN_P3_1_PORT, AO_RN_P3_1_PIN, v); /* Turn off the BT device using the SW_BTN pin */ printf("Power down BT\n"); flush(); - ao_gpio_set(AO_RN_SW_BTN_PORT, AO_RN_SW_BTN_PIN, foo, 0); + ao_gpio_set(AO_RN_SW_BTN_PORT, AO_RN_SW_BTN_PIN, 0); ao_delay(AO_MS_TO_TICKS(1000)); /* And turn it back on */ printf("Power up BT\n"); flush(); - ao_gpio_set(AO_RN_SW_BTN_PORT, AO_RN_SW_BTN_PIN, foo, 1); + ao_gpio_set(AO_RN_SW_BTN_PORT, AO_RN_SW_BTN_PIN, 1); /* Right after power on, poke P3_1 five times to force a * factory reset @@ -547,7 +547,7 @@ ao_rn_factory(void) for (i = 0; i < 20; i++) { v = 1-v; ao_delay(AO_MS_TO_TICKS(50)); - ao_gpio_set(AO_RN_P3_1_PORT, AO_RN_P3_1_PIN, foo, v); + ao_gpio_set(AO_RN_P3_1_PORT, AO_RN_P3_1_PIN, v); ao_led_toggle(AO_BT_LED); } @@ -556,9 +556,9 @@ ao_rn_factory(void) printf("Reboot BT\n"); flush(); ao_delay(AO_MS_TO_TICKS(100)); - ao_gpio_set(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, foo, 0); + ao_gpio_set(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, 0); ao_delay(AO_MS_TO_TICKS(100)); - ao_gpio_set(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, foo, 1); + ao_gpio_set(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, 1); } #if AO_RN_DEBUG @@ -588,13 +588,13 @@ ao_rn4678_init(void) ao_serial_rn_set_speed(AO_SERIAL_SPEED_115200); /* Reset line */ - ao_enable_output(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, foo, 0); + ao_enable_output(AO_RN_RST_N_PORT, AO_RN_RST_N_PIN, 0); /* SW_BTN */ - ao_enable_output(AO_RN_SW_BTN_PORT, AO_RN_SW_BTN_PIN, foo, 1); + ao_enable_output(AO_RN_SW_BTN_PORT, AO_RN_SW_BTN_PIN, 1); /* P3_7 command/data selector */ - ao_enable_output(AO_RN_CMD_PORT, AO_RN_CMD_PIN, foo, AO_RN_CMD_CMD); + ao_enable_output(AO_RN_CMD_PORT, AO_RN_CMD_PIN, AO_RN_CMD_CMD); ao_enable_input(AO_RN_CONNECTED_PORT, AO_RN_CONNECTED_PIN, AO_EXTI_MODE_PULL_NONE); ao_exti_setup(AO_RN_CONNECTED_PORT, AO_RN_CONNECTED_PIN, |