diff options
Diffstat (limited to 'src/drivers/ao_aprs.c')
| -rw-r--r-- | src/drivers/ao_aprs.c | 102 |
1 files changed, 56 insertions, 46 deletions
diff --git a/src/drivers/ao_aprs.c b/src/drivers/ao_aprs.c index 8a1b6a4d..a9047149 100644 --- a/src/drivers/ao_aprs.c +++ b/src/drivers/ao_aprs.c @@ -1,11 +1,11 @@ -/** +/** * http://ad7zj.net/kd7lmo/aprsbeacon_code.html * * @mainpage Pico Beacon * * @section overview_sec Overview * - * The Pico Beacon is an APRS based tracking beacon that operates in the UHF 420-450MHz band. The device utilizes a + * The Pico Beacon is an APRS based tracking beacon that operates in the UHF 420-450MHz band. The device utilizes a * Microchip PIC 18F2525 embedded controller, Motorola M12+ GPS engine, and Analog Devices AD9954 DDS. The device is capable * of generating a 1200bps A-FSK and 9600 bps FSK AX.25 compliant APRS (Automatic Position Reporting System) message. @@ -24,7 +24,7 @@ * (4) corrected size of LOG_COORD block when searching for end of log. * * @subsection v303 V3.03 - * 15 Sep 2005, Change include; (1) removed AD9954 setting SDIO as input pin, + * 15 Sep 2005, Change include; (1) removed AD9954 setting SDIO as input pin, * (2) additional comments and Doxygen tags, * (3) integration and test code calculates DDS FTW, * (4) swapped bus and reference analog input ports (hardware change), @@ -38,7 +38,7 @@ * (2) Doxygen documentation clean up and additions, and * (3) added integration and test code to baseline. * - * + * * @subsection v301 V3.01 * 13 Jan 2005, Renamed project and files to Pico Beacon. * @@ -54,28 +54,28 @@ * (8) added flight data recorder, and * (9) added diagnostics terminal mode. * - * + * * @subsection v201 V2.01 - * 30 Jan 2004, Change include; (1) General clean up of in-line documentation, and + * 30 Jan 2004, Change include; (1) General clean up of in-line documentation, and * (2) changed temperature resolution to 0.1 degrees F. * - * + * * @subsection v200 V2.00 * 26 Oct 2002, Change include; (1) Micro Beacon II hardware changes including PIC18F252 processor, - * (2) serial EEPROM, - * (3) GPS power control, - * (4) additional ADC input, and - * (5) LM60 temperature sensor. + * (2) serial EEPROM, + * (3) GPS power control, + * (4) additional ADC input, and + * (5) LM60 temperature sensor. * * * @subsection v101 V1.01 - * 5 Dec 2001, Change include; (1) Changed startup message, and + * 5 Dec 2001, Change include; (1) Changed startup message, and * (2) applied SEPARATE pragma to several methods for memory usage. * * * @subsection v100 V1.00 * 25 Sep 2001, Initial release. Flew ANSR-3 and ANSR-4. - * + * * @@ -102,11 +102,11 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * + * - * - * + * + * * @section design Design Details * * Provides design details on a variety of the components that make up the Pico Beacon. @@ -118,29 +118,33 @@ * @page power Power Consumption * * Measured DC power consumption. - * - * 3VDC prime power current + * + * 3VDC prime power current * - * 7mA Held in reset + * 7mA Held in reset - * 18mA Processor running, all I/O off + * 18mA Processor running, all I/O off - * 110mA GPS running + * 110mA GPS running - * 120mA GPS running w/antenna + * 120mA GPS running w/antenna - * 250mA DDS running and GPS w/antenna + * 250mA DDS running and GPS w/antenna - * 420mA DDS running, GPS w/antenna, and PA chain on with no RF + * 420mA DDS running, GPS w/antenna, and PA chain on with no RF - * 900mA Transmit + * 900mA Transmit * */ #ifndef AO_APRS_TEST #include <ao.h> + +#if !HAS_APRS +#error HAS_APRS not set +#endif #endif #include <ao_aprs.h> @@ -176,11 +180,11 @@ static uint16_t sysCRC16(const uint8_t *buffer, uint8_t length, uint16_t crc) { uint8_t i, bit, value; - for (i = 0; i < length; ++i) + for (i = 0; i < length; ++i) { value = buffer[i]; - for (bit = 0; bit < 8; ++bit) + for (bit = 0; bit < 8; ++bit) { crc ^= (value & 0x01); crc = ( crc & 0x01 ) ? ( crc >> 1 ) ^ 0x8408 : ( crc >> 1 ); @@ -253,7 +257,7 @@ typedef enum /// AX.25 compliant packet header that contains destination, station call sign, and path. /// 0x76 for SSID-11, 0x78 for SSID-12 -static uint8_t TNC_AX25_HEADER[] = { +static uint8_t TNC_AX25_HEADER[] = { 'A' << 1, 'P' << 1, 'A' << 1, 'M' << 1, ' ' << 1, ' ' << 1, 0x60, 'N' << 1, '0' << 1, 'C' << 1, 'A' << 1, 'L' << 1, 'L' << 1, 0x78, 'W' << 1, 'I' << 1, 'D' << 1, 'E' << 1, '2' << 1, ' ' << 1, 0x65, @@ -261,6 +265,7 @@ static uint8_t TNC_AX25_HEADER[] = { #define TNC_CALLSIGN_OFF 7 #define TNC_CALLSIGN_LEN 6 +#define TNC_SSID_OFF 13 static void tncSetCallsign(void) @@ -275,6 +280,9 @@ tncSetCallsign(void) } for (; i < TNC_CALLSIGN_LEN; i++) TNC_AX25_HEADER[TNC_CALLSIGN_OFF + i] = ' ' << 1; + + /* Fill in the SSID with the low digit of the serial number */ + TNC_AX25_HEADER[TNC_SSID_OFF] = 0x60 | ((ao_config.aprs_ssid & 0xf) << 1); #endif } @@ -302,7 +310,7 @@ static uint8_t tncBitStuff; /// Buffer to hold the message portion of the AX.25 packet as we prepare it. static uint8_t tncBuffer[TNC_BUFFER_SIZE]; -/** +/** * Initialize the TNC internal variables. */ static void tncInit() @@ -323,7 +331,7 @@ static void tnc1200TimerTick() else timeNCOFreq = 0x3aab; - switch (tncMode) + switch (tncMode) { case TNC_TX_READY: // Generate a test signal alteranting between high and low tones. @@ -339,16 +347,16 @@ static void tnc1200TimerTick() else tncTxBit = 0; } - + // When the flag is done, determine if we need to send more or data. - if (++tncBitCount == 8) + if (++tncBitCount == 8) { tncBitCount = 0; tncShift = 0x7e; // Once we transmit x mS of flags, send the data. // txDelay bytes * 8 bits/byte * 833uS/bit = x mS - if (++tncIndex == TNC_TX_DELAY) + if (++tncIndex == TNC_TX_DELAY) { tncIndex = 0; tncShift = TNC_AX25_HEADER[0]; @@ -361,7 +369,7 @@ static void tnc1200TimerTick() case TNC_TX_HEADER: // Determine if we have sent 5 ones in a row, if we have send a zero. - if (tncBitStuff == 0x1f) + if (tncBitStuff == 0x1f) { if (tncTxBit == 0) tncTxBit = 1; @@ -381,17 +389,17 @@ static void tnc1200TimerTick() tncTxBit = 0; } - // Save the data stream so we can determine if bit stuffing is + // Save the data stream so we can determine if bit stuffing is // required on the next bit time. tncBitStuff = ((tncBitStuff << 1) | (tncShift & 0x01)) & 0x1f; // If all the bits were shifted, get the next byte. - if (++tncBitCount == 8) + if (++tncBitCount == 8) { tncBitCount = 0; // After the header is sent, then send the data. - if (++tncIndex == sizeof(TNC_AX25_HEADER)) + if (++tncIndex == sizeof(TNC_AX25_HEADER)) { tncIndex = 0; tncShift = tncBuffer[0]; @@ -406,7 +414,7 @@ static void tnc1200TimerTick() case TNC_TX_DATA: // Determine if we have sent 5 ones in a row, if we have send a zero. - if (tncBitStuff == 0x1f) + if (tncBitStuff == 0x1f) { if (tncTxBit == 0) tncTxBit = 1; @@ -426,17 +434,17 @@ static void tnc1200TimerTick() tncTxBit = 0; } - // Save the data stream so we can determine if bit stuffing is + // Save the data stream so we can determine if bit stuffing is // required on the next bit time. tncBitStuff = ((tncBitStuff << 1) | (tncShift & 0x01)) & 0x1f; // If all the bits were shifted, get the next byte. - if (++tncBitCount == 8) + if (++tncBitCount == 8) { tncBitCount = 0; // If everything was sent, transmit closing flags. - if (++tncIndex == tncLength) + if (++tncIndex == tncLength) { tncIndex = 0; tncShift = 0x7e; @@ -451,7 +459,7 @@ static void tnc1200TimerTick() case TNC_TX_END: // The variable tncShift contains the lastest data byte. - // NRZI enocde the data stream. + // NRZI enocde the data stream. if ((tncShift & 0x01) == 0x00) { if (tncTxBit == 0) tncTxBit = 1; @@ -460,13 +468,13 @@ static void tnc1200TimerTick() } // If all the bits were shifted, get the next one. - if (++tncBitCount == 8) + if (++tncBitCount == 8) { tncBitCount = 0; tncShift = 0x7e; - + // Transmit two closing flags. - if (++tncIndex == 2) + if (++tncIndex == 2) { tncMode = TNC_TX_READY; @@ -530,6 +538,7 @@ static int tncComment(uint8_t *buf) #ifdef AO_SENSE_MAIN " M%d.%d" #endif + " %d" , ao_gps_locked(), ao_num_sats(), battery/10, @@ -542,6 +551,7 @@ static int tncComment(uint8_t *buf) , main/10, main%10 #endif + , ao_serial_number ); #else return sprintf((char *) buf, @@ -759,7 +769,7 @@ tncFill(uint8_t *buf, int16_t len) return l; } -/** +/** * Prepare an AX.25 data packet. Each time this method is called, it automatically * rotates through 1 of 3 messages. * |