diff options
Diffstat (limited to 'doc/telegps-quick-start.inc')
| -rw-r--r-- | doc/telegps-quick-start.inc | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/doc/telegps-quick-start.inc b/doc/telegps-quick-start.inc new file mode 100644 index 00000000..e8db8ac3 --- /dev/null +++ b/doc/telegps-quick-start.inc @@ -0,0 +1,24 @@ +== TeleGPS Quick Start Guide + + TeleGPS is designed to be easy to use. Requiring no external + components, flying takes just a few steps. + + First, download and install the software from + http://altusmetrum.org/AltOS. This will make sure that + you have the right device drivers installed. + + Next, plug in the battery and USB cable and connect TeleGPS to + your computer. This will charge the battery and allow you to + configure the device. + + Start the TeleGPS application and set the callsign and frequency + on your TeleGPS device; refer to the Configure TeleGPS section + in the TeleGPS Application chapter for instructions. + + Unplug TeleGPS when the battery charger light goes green. This + will enable the radio and logging portions of the TeleGPS + firmware. + + Connect TeleDongle to your computer and start TeleGPS or start + AltosDroid on your android device and connect to TeleBT. Set the + frequency to match the TeleGPS and you should be receiving telemetry. |