diff options
Diffstat (limited to 'doc/altosui.inc')
| -rw-r--r-- | doc/altosui.inc | 50 |
1 files changed, 25 insertions, 25 deletions
diff --git a/doc/altosui.inc b/doc/altosui.inc index adce6f27..44f77aca 100644 --- a/doc/altosui.inc +++ b/doc/altosui.inc @@ -1,7 +1,7 @@ == AltosUI .AltosUI Main Window - image::altosui.png[width="4.6in"] + image::altosui.png[width=450] The AltosUI program provides a graphical user interface for interacting with the Altus Metrum product family. AltosUI can @@ -12,10 +12,8 @@ the tasks provided from the top-level toolbar. ifdef::radio[] + === Monitor Flight - //// - <subtitle>Receive, Record and Display Telemetry Data</subtitle> - //// Selecting this item brings up a dialog box listing all of the connected TeleDongle devices. When you choose @@ -24,7 +22,7 @@ device. .Device Selection Dialog - image::device-selection.png[width="3.1in"] + image::device-selection.png[width=300] All telemetry data received are automatically recorded in suitable log files. The name of the files includes @@ -84,7 +82,7 @@ ==== Launch Pad .Monitor Flight Launch Pad View - image::launch-pad.png[width="5.5in"] + image::launch-pad.png[width=400] The 'Launch Pad' tab shows information used to decide when the rocket is ready for flight. The first elements include red/green @@ -146,7 +144,7 @@ ==== Ascent .Monitor Flight Ascent View - image::ascent.png[width="5.5in"] + image::ascent.png[width=400] This tab is shown during Boost, Fast and Coast phases. The information displayed here helps monitor the @@ -170,7 +168,7 @@ ==== Descent .Monitor Flight Descent View - image::descent.png[width="5.5in"] + image::descent.png[width=400] Once the rocket has reached apogee and (we hope) activated the apogee charge, attention switches to @@ -209,7 +207,7 @@ ==== Landed .Monitor Flight Landed View - image::landed.png[width="5.5in"] + image::landed.png[width=400] Once the rocket is on the ground, attention switches to recovery. While the radio signal is often lost once @@ -246,7 +244,7 @@ ==== Table .Monitor Flight Table View - image::table.png[width="5.5in"] + image::table.png[width=400] The table view shows all of the data available from the flight computer. Probably the most useful data on @@ -257,7 +255,7 @@ ==== Site Map .Monitor Flight Site Map View - image::site-map.png[width="5.5in"] + image::site-map.png[width=400] When the TeleMetrum has a GPS fix, the Site Map tab will map the rocket's position to make it easier for @@ -291,7 +289,7 @@ ==== Igniter .Monitor Flight Additional Igniter View - image::ignitor.png[width="5.5in"] + image::ignitor.png[width=400] TeleMega includes four additional programmable pyro channels. The Ignitor tab shows whether each of them has @@ -299,6 +297,7 @@ voltage measured here will be close to the pyro battery voltage. A value greater than 3.2V is required for a 'GO' status. + endif::radio[] @@ -375,7 +374,7 @@ ==== Flight Graph .Flight Data Graph - image::graph.png[width="5.5in"] + image::graph.png[width=400] By default, the graph contains acceleration (blue), velocity (green) and altitude (red). @@ -392,7 +391,7 @@ ==== Configure Graph .Flight Graph Configuration - image::graph-configure.png[width="5.5in"] + image::graph-configure.png[width=400] This selects which graph elements to show, and, at the very bottom. It also lets you configure how @@ -420,7 +419,7 @@ ==== Flight Statistics .Flight Statistics - image::graph-stats.png[width="5.5in"] + image::graph-stats.png[width=400] Shows overall data computed from the flight. @@ -428,7 +427,7 @@ ==== Map .Flight Map - image::graph-map.png[width="5.5in"] + image::graph-map.png[width=400] Shows a satellite image of the flight area overlaid with the path of the flight. The red concentric @@ -481,7 +480,7 @@ === Configure Altimeter .Altimeter Configuration - image::configure-altimeter.png[width="3.6in"] + image::configure-altimeter.png[width=350] ifdef::radio[] Select this button and then select either an altimeter or @@ -523,24 +522,25 @@ The rest of the dialog contains the parameters to be configured. - include::config-device.raw[] + include::config-device.adoc[] === Configure AltosUI .Configure AltosUI Dialog - image::configure-altosui.png[width="2.4in"] + image::configure-altosui.png[width=230] This button presents a dialog so that you can configure the AltosUI global settings. - include::config-ui.raw[] + include::config-ui.adoc[] ifdef::radio[] + === Configure Groundstation .Configure Groundstation Dialog - image::configure-groundstation.png[width="3.1in"] + image::configure-groundstation.png[width=300] Select this button and then select a TeleDongle or TeleBT Device from the list provided. @@ -631,7 +631,7 @@ === Fire Igniter .Fire Igniter Window - image::fire-igniter.png[width="1.2in"] + image::fire-igniter.png[width=120] This activates the igniter circuits in the flight computer to help test recovery systems @@ -663,7 +663,7 @@ === Scan Channels .Scan Channels Window - image::scan-channels.png[width="3.2in"] + image::scan-channels.png[width=300] This listens for telemetry packets on all of the configured frequencies, displaying information about @@ -675,14 +675,14 @@ endif::radio[] ifdef::gps[] - include::load-maps.raw[] + include::load-maps.adoc[] endif::gps[] ifdef::radio[] === Monitor Idle .Monitor Idle Window - image::monitor-idle.png[width="5.2in"] + image::monitor-idle.png[width=500] This brings up a dialog similar to the Monitor Flight UI, except it works with the altimeter in “idle” mode |