3 files changed, 51 insertions, 2 deletions
diff --git a/ao-bringup/turnon_teledongle_v0.2 b/ao-bringup/turnon_teledongle_v0.2
index 058e72ce..20c8798a 100755
--- a/ao-bringup/turnon_teledongle_v0.2
+++ b/ao-bringup/turnon_teledongle_v0.2
@@ -51,7 +51,7 @@ read FREQ
 CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
 
 echo "Programming flash with cal value " $CAL_VALUE
-$AOLOAD -D $programmer --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2*.ihx $SERIAL
+$AOLOAD -D $programmer --cal $CAL_VALUE ~/altusmetrumllc/Binaries/teledongle-v0.2*.ihx $SERIAL
 
 echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
 echo $SERIAL","$CAL_VALUE >> cal_values
diff --git a/ao-bringup/turnon_telemetrum b/ao-bringup/turnon_telemetrum
index 5c62c49d..e0648e66 100755
--- a/ao-bringup/turnon_telemetrum
+++ b/ao-bringup/turnon_telemetrum
@@ -48,7 +48,7 @@ $FLASH_STM ~/altusmetrumllc/Binaries/loaders/telemetrum-v$VERSION-*.elf || exit
 
 sleep 2
 
-$USBLOAD --serial=$SERIAL /usr/share/altos/telemetrum-v$VERSION*.ihx || exit 1
+$USBLOAD --serial=$SERIAL ~/altusmetrumllc/Binaries/telemetrum-v$VERSION*.ihx || exit 1
 
 sleep 5
 
diff --git a/ao-bringup/turnon_telemetrum_v1.1 b/ao-bringup/turnon_telemetrum_v1.1
new file mode 100755
index 00000000..830d7ed9
--- /dev/null
+++ b/ao-bringup/turnon_telemetrum_v1.1
@@ -0,0 +1,49 @@
+#!/bin/sh
+
+if [ -x ../ao-tools/ao-load/ao-load ]; then
+	AOLOAD=../ao-tools/ao-load/ao-load
+elif [ -x /usr/bin/ao-load ]; then
+	AOLOAD=/usr/bin/ao-load
+else
+	echo "Can't find ao-load!  Aborting."
+	exit 1
+fi
+
+if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then
+	RAWLOAD=../ao-tools/ao-rawload/ao-rawload
+elif [ -x /usr/bin/ao-rawload ]; then
+	RAWLOAD=/usr/bin/ao-rawload
+else
+	echo "Can't find ao-rawload!  Aborting."
+	exit 1
+fi
+
+echo "TeleMetrum v1.1 Turn-On and Calibration Program"
+echo "Copyright 2010 by Bdale Garbee.  Released under GPL v2"
+echo
+echo "Expectations:"
+echo "\tTeleMetrum v1.1 powered from USB"
+echo "\t\twith TeleDongle (on /dev/ttyACM0) cabled to debug header"
+echo "\t\twith coax from UHF to frequency counter"
+echo
+echo -n "TeleMetrum serial number: "
+read SERIAL
+
+echo $RAWLOAD
+
+$RAWLOAD --device 100 -r ao_led_blink.ihx
+echo "the red LED should be blinking"
+sleep 5
+
+$RAWLOAD --device 100 -r ao_radio_xmit.ihx
+echo -n "Generating RF carrier.  Please enter measured frequency: "
+read FREQ
+
+CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
+
+echo "Programming flash with cal value " $CAL_VALUE
+$AOLOAD --device 100 --cal $CAL_VALUE \
+	~/altusmetrumllc/Binaries/telemetrum-v1.1*.ihx $SERIAL
+
+echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
+echo "Unplug and replug USB, cu to the board, confirm freq and record power"