diff options
| -rw-r--r-- | ChangeLog | 231 | ||||
| -rw-r--r-- | debian/changelog | 31 |
2 files changed, 262 insertions, 0 deletions
@@ -1,3 +1,234 @@ +commit 82fdbfe1229d1ea5e6906ea240d54b3da73d9a69 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Feb 20 21:35:43 2010 -0800 + + Must install .map files for ao-load to work + + ao-load uses the .map files to rewrite the serial number and other + config parameters into the program flash. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit a5215c2bd9249a285fc834db0c453fb3e7daed87 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Feb 20 21:20:05 2010 -0800 + + Add back stack size checking to altos linking phase + + This verifies that the stack start specified during the compile + will work with the resulting program + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit 18eeb79026f7e5c54bf99435537c024427011a36 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Feb 20 21:05:45 2010 -0800 + + Quiet make output. + + This borrows ideas from the notmuch project to reduce the command line + clutter seen when compiling or linking stuff. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit 004c2a9b7a4b44ef71ca60482573e8e9d8c6ce93 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Feb 20 20:36:08 2010 -0800 + + Update .gitignore files + +commit 84c93bb2fc4558a5e4654794ba90e730a84eaf67 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Feb 20 20:22:16 2010 -0800 + + Change altos build process to support per-product compile-time changes + + This creates per-product subdirectories and recompiles everything for + each product, allowing per-product compile-time changes for things + like peripheral pin assignments and attached serial devices. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit fd0a42e0e96dcb8ecc9e999f70bcf70692692af9 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Feb 20 20:21:07 2010 -0800 + + Change barometer conversion code to shrink conversion table + +commit 876e9a10b9096ead85fbe08ec9a6a0329cf7cbd4 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Feb 13 16:42:27 2010 -0800 + + Log GPS data on pad after boost detect. + + This wakes up the two GPS reporting tasks and gets them to report out + any existing GPS data to the log file. To make sure the timestamps in + that GPS data are accurate, this also records GPS time on receipt of + the GPS data instead of when that is logged. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit c83615567b4567f3dc45a7f7b894943b45fbb65c +Author: Keith Packard <keithp@keithp.com> +Date: Sun Feb 7 00:25:22 2010 -0800 + + Pull in a bit more data for filtering the start of the boost + +commit f8967607b3dda0c0ce7afe8bb077da2da5ed3dcd +Author: Keith Packard <keithp@keithp.com> +Date: Sun Feb 7 00:24:56 2010 -0800 + + Compute daytime using GPS as time base + +commit 2a6350149407c7d2e7d143906c40c5e331248aeb +Author: Keith Packard <keithp@keithp.com> +Date: Thu Feb 11 18:48:56 2010 -0800 + + Missing ao_mutex_put in gps_dump + +commit 9856b7c4397afcecc8f541af9a83824e817b3612 +Author: Keith Packard <keithp@keithp.com> +Date: Sun Jan 10 16:31:50 2010 -0800 + + Switch to using internal cc1111 temperature sensor + + v0.2 has no temperature sensor, and several of the v0.1 boards didn't + get a temperature sensor loaded. Use the internal temperature sensor + on the cc1111 in all cases instead. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit 0c2533be15858774ef9381aa8c8344356fd5b971 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 22:06:19 2010 -0800 + + Force idle mode by shorting the SPI clock to ground at boot time. + + This allows you to override the flight mode detection code in case the + accelerometer calibration is broken somehow. Hold the SPI clock shoted + to ground until the LED comes on, then remove it. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit 28346736a7799c0767e54511d9949cd61d35e471 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 20:57:48 2010 -0800 + + Add simple gps dump command 'g' + + This just dumps out the data in a very simple format to verify the GPS + receiver. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit a6082a8b4501ac4cb18584ace1f0c40e088e5484 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 20:57:29 2010 -0800 + + Remove flash debugging printfs + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit 05bb953830604721c9a49dd56256b86f3666b5ff +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 20:42:57 2010 -0800 + + Don't set ao_flash_setup_done until we're actually done. + + Because we're accessing this variable outside of the mutex, we need to + make sure it isn't set until the data it covers has been initialized. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit 327e5e782958e516a7b7a786ab6c176b0decb8b8 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 20:04:42 2010 -0800 + + Dump config block from read/write config and flash_status commands + +commit 05e5bb2d330b755967d06fb859585c81f5f5fbb5 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 19:46:46 2010 -0800 + + Dump more flash parameters for the flash_status command + +commit d4c8895b349998e02e03ed83466a0ca7afb3d99b +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 17:57:52 2010 -0800 + + Add 'f' command to display flash status register contents + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit c1334f712f01543adb10809bc1a3ca120e27290b +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 09:55:04 2010 -0800 + + Add at45db161d.h header file for new flash part. + + Forgot to add this when I added the driver. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit a0d4c1b06d27e850d233f8ddf8fe32912bf0ec8f +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 01:29:41 2010 -0800 + + Remove green LED and temp sensor from v0.2 code + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit dc8d18736239b14c2ec48a40a01515912c5c25e6 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Jan 9 01:22:06 2010 -0800 + + Add AT45DBxx1D driver + + This driver supports the AT45DB011D through AT45DB321D DataFlash + parts as found in TeleMetrum v0.2 + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit 3bab7e66d25988f5d63ec139c8814a85b983f8f3 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Dec 19 20:32:18 2009 -0800 + + Remove dbg driver code from telemetrum/teledongle + + The only board with debug outputs is the TI dongle at this point, so + the debug modules were disabled in TM and TD some time + ago. Unfortunately, the code was not removed then. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit eddb82390a0ecb07ef83c04861993842906b03ab +Author: Keith Packard <keithp@keithp.com> +Date: Sat Dec 19 15:31:36 2009 -0800 + + Ensure that ao_alarm waits at least the specified time + + Because the timer tick may happen soon, it's important to delay by + another tick to ensure that we don't wake up early. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit 598d168bd6552c3756e4b0267de44147eadab9f6 +Author: Keith Packard <keithp@keithp.com> +Date: Sat Dec 19 14:03:11 2009 -0800 + + Disable monitor mode before attempting radio test. + + If monitor mode is left active, then the radio lock will not be able + to be acquired for the radio test. + + Signed-off-by: Keith Packard <keithp@keithp.com> + +commit d4cf1446680d8b47396bcda338e8df7af395d102 +Author: Bdale Garbee <bdale@gag.com> +Date: Sat Dec 19 13:53:38 2009 -0700 + + update changelogs for Debian build + commit 10d1bbcd9709a5eee8d50989215242b16feb7232 Author: Keith Packard <keithp@keithp.com> Date: Sat Dec 19 11:34:16 2009 -0800 diff --git a/debian/changelog b/debian/changelog index b988eea8..2f43f627 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,34 @@ +altos (0.6+85+g82fdbfe) unstable; urgency=low + + [ Keith Packard ] + * Disable monitor mode before attempting radio test. + * Ensure that ao_alarm waits at least the specified time + * Remove dbg driver code from telemetrum/teledongle + * Add AT45DBxx1D driver + * Remove green LED and temp sensor from v0.2 code + * Add at45db161d.h header file for new flash part. + * Add 'f' command to display flash status register contents + * Dump more flash parameters for the flash_status command + * Dump config block from read/write config and flash_status commands + * Don't set ao_flash_setup_done until we're actually done. + * Remove flash debugging printfs + * Add simple gps dump command 'g' + * Force idle mode by shorting the SPI clock to ground at boot time. + * Switch to using internal cc1111 temperature sensor + * Missing ao_mutex_put in gps_dump + * Compute daytime using GPS as time base + * Pull in a bit more data for filtering the start of the boost + * Log GPS data on pad after boost detect. + * Change barometer conversion code to shrink conversion table + * Change altos build process to support per-product compile-time + changes + * Update .gitignore files + * Quiet make output. + * Add back stack size checking to altos linking phase + * Must install .map files for ao-load to work + + -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700 + altos (0.6+60+g10d1bbc) unstable; urgency=low [ Keith Packard ] |