diff options
| -rw-r--r-- | src/avr/ao_usb_avr.c | 2 | ||||
| -rw-r--r-- | src/cc1111/ao_usb.c | 2 | ||||
| -rw-r--r-- | src/core/ao_balloon.c (renamed from src/teleballoon-v1.1/ao_balloon.c) | 13 | ||||
| -rw-r--r-- | src/core/ao_log_metrum.c | 2 | ||||
| -rw-r--r-- | src/core/ao_telemetry.c | 8 | ||||
| -rw-r--r-- | src/core/ao_usb.h | 2 | ||||
| -rw-r--r-- | src/lpc/ao_usb_lpc.c | 2 | ||||
| -rw-r--r-- | src/stm/ao_usb_stm.c | 5 | ||||
| -rw-r--r-- | src/teleballoon-v2.0/.gitignore | 3 | ||||
| -rw-r--r-- | src/teleballoon-v2.0/Makefile | 129 | ||||
| -rw-r--r-- | src/teleballoon-v2.0/ao_pins.h | 323 | ||||
| -rw-r--r-- | src/teleballoon-v2.0/ao_teleballoon.c | 92 |
12 files changed, 576 insertions, 7 deletions
diff --git a/src/avr/ao_usb_avr.c b/src/avr/ao_usb_avr.c index bd75b17d..cb0455c2 100644 --- a/src/avr/ao_usb_avr.c +++ b/src/avr/ao_usb_avr.c @@ -46,7 +46,7 @@ static __xdata uint8_t ao_usb_ep0_out_len; static __xdata uint8_t *__xdata ao_usb_ep0_out_data; static __xdata uint8_t ao_usb_in_flushed; -static __xdata uint8_t ao_usb_running; +__xdata uint8_t ao_usb_running; static __xdata uint8_t ao_usb_configuration; static __xdata uint8_t ueienx_0; diff --git a/src/cc1111/ao_usb.c b/src/cc1111/ao_usb.c index b0ab409d..2141eda8 100644 --- a/src/cc1111/ao_usb.c +++ b/src/cc1111/ao_usb.c @@ -24,7 +24,7 @@ static __xdata uint16_t ao_usb_in_bytes; static __pdata uint16_t ao_usb_in_bytes_last; static __xdata uint16_t ao_usb_out_bytes; static __pdata uint8_t ao_usb_iif; -static __pdata uint8_t ao_usb_running; +__pdata uint8_t ao_usb_running; static void ao_usb_set_interrupts(void) diff --git a/src/teleballoon-v1.1/ao_balloon.c b/src/core/ao_balloon.c index 12752d1f..904a9c08 100644 --- a/src/teleballoon-v1.1/ao_balloon.c +++ b/src/core/ao_balloon.c @@ -31,6 +31,13 @@ #error Please define HAS_USB #endif +#if HAS_SENSOR_ERRORS +/* Any sensor can set this to mark the flight computer as 'broken' */ +__xdata uint8_t ao_sensor_errors; +#endif + +__pdata uint16_t ao_motor_number; /* number of motors burned so far */ + /* Main flight thread. */ __pdata enum ao_flight_state ao_flight_state; /* current flight state */ @@ -67,7 +74,8 @@ ao_flight(void) /* Disable the USB controller in flight mode * to save power */ - ao_usb_disable(); + if (!ao_usb_running) + ao_usb_disable(); #endif /* Disable packet mode in pad state */ @@ -112,9 +120,8 @@ ao_flight(void) ao_wakeup(DATA_TO_XDATA(&ao_flight_state)); } break; - case ao_flight_drogue: + default: break; - } } } diff --git a/src/core/ao_log_metrum.c b/src/core/ao_log_metrum.c index 91624d98..9b17adc2 100644 --- a/src/core/ao_log_metrum.c +++ b/src/core/ao_log_metrum.c @@ -116,7 +116,9 @@ ao_log(void) log.u.sensor.pres = ao_data_ring[ao_log_data_pos].ms5607_raw.pres; log.u.sensor.temp = ao_data_ring[ao_log_data_pos].ms5607_raw.temp; #endif +#if HAS_ACCEL log.u.sensor.accel = ao_data_accel(&ao_data_ring[ao_log_data_pos]); +#endif ao_log_metrum(&log); if (ao_log_state <= ao_flight_coast) next_sensor = log.tick + AO_SENSOR_INTERVAL_ASCENT; diff --git a/src/core/ao_telemetry.c b/src/core/ao_telemetry.c index 5a00d825..a1c19185 100644 --- a/src/core/ao_telemetry.c +++ b/src/core/ao_telemetry.c @@ -187,7 +187,9 @@ ao_send_metrum_sensor(void) telemetry.generic.type = AO_TELEMETRY_METRUM_SENSOR; telemetry.metrum_sensor.state = ao_flight_state; +#if HAS_ACCEL telemetry.metrum_sensor.accel = ao_data_accel(packet); +#endif telemetry.metrum_sensor.pres = ao_data_pres(packet); telemetry.metrum_sensor.temp = ao_data_temp(packet); @@ -216,9 +218,15 @@ ao_send_metrum_data(void) telemetry.generic.type = AO_TELEMETRY_METRUM_DATA; telemetry.metrum_data.ground_pres = ao_ground_pres; +#if HAS_ACCEL telemetry.metrum_data.ground_accel = ao_ground_accel; telemetry.metrum_data.accel_plus_g = ao_config.accel_plus_g; telemetry.metrum_data.accel_minus_g = ao_config.accel_minus_g; +#else + telemetry.metrum_data.ground_accel = 1; + telemetry.metrum_data.accel_plus_g = 0; + telemetry.metrum_data.accel_minus_g = 2; +#endif ao_radio_send(&telemetry, sizeof (telemetry)); ao_telemetry_metrum_data_cur = ao_telemetry_metrum_data_max; diff --git a/src/core/ao_usb.h b/src/core/ao_usb.h index 35e64e65..1ce4f82f 100644 --- a/src/core/ao_usb.h +++ b/src/core/ao_usb.h @@ -137,4 +137,6 @@ struct ao_usb_line_coding { uint8_t data_bits; } ; +extern __pdata uint8_t ao_usb_running; + #endif /* _AO_USB_H_ */ diff --git a/src/lpc/ao_usb_lpc.c b/src/lpc/ao_usb_lpc.c index d02ccdd6..340413fa 100644 --- a/src/lpc/ao_usb_lpc.c +++ b/src/lpc/ao_usb_lpc.c @@ -109,7 +109,7 @@ static uint8_t ao_usb_in_pending; * but not pulled to the shadow buffer. */ static uint8_t ao_usb_out_avail; -static uint8_t ao_usb_running; +uint8_t ao_usb_running; static uint8_t ao_usb_configuration; #define AO_USB_EP0_GOT_RESET 1 diff --git a/src/stm/ao_usb_stm.c b/src/stm/ao_usb_stm.c index 27b82357..4e9d1f14 100644 --- a/src/stm/ao_usb_stm.c +++ b/src/stm/ao_usb_stm.c @@ -117,7 +117,7 @@ static uint8_t ao_usb_in_pending; * but not pulled to the shadow buffer. */ static uint8_t ao_usb_out_avail; -static uint8_t ao_usb_running; +uint8_t ao_usb_running; static uint8_t ao_usb_configuration; #define AO_USB_EP0_GOT_RESET 1 @@ -727,6 +727,9 @@ ao_usb_ep0_handle(uint8_t receive) if (receive & AO_USB_EP0_GOT_TX_ACK) { debug ("\tgot tx ack\n"); +#if HAS_FLIGHT && AO_USB_FORCE_IDLE + ao_flight_force_idle = 1; +#endif /* Wait until the IN packet is received from addr 0 * before assigning our local address */ diff --git a/src/teleballoon-v2.0/.gitignore b/src/teleballoon-v2.0/.gitignore new file mode 100644 index 00000000..85f12553 --- /dev/null +++ b/src/teleballoon-v2.0/.gitignore @@ -0,0 +1,3 @@ +ao_product.h +teleballoon-*.elf + diff --git a/src/teleballoon-v2.0/Makefile b/src/teleballoon-v2.0/Makefile new file mode 100644 index 00000000..a17a06d6 --- /dev/null +++ b/src/teleballoon-v2.0/Makefile @@ -0,0 +1,129 @@ +# +# AltOS build +# +# + +include ../stm/Makefile.defs + +INC = \ + ao.h \ + ao_arch.h \ + ao_arch_funcs.h \ + ao_companion.h \ + ao_data.h \ + ao_sample.h \ + ao_pins.h \ + altitude-pa.h \ + ao_kalman.h \ + ao_product.h \ + ao_ms5607.h \ + ao_mma655x.h \ + ao_cc1120_CC1120.h \ + ao_profile.h \ + ao_task.h \ + ao_whiten.h \ + ao_sample_profile.h \ + ao_mpu.h \ + stm32l.h \ + Makefile + +#PROFILE=ao_profile.c +#PROFILE_DEF=-DAO_PROFILE=1 + +#SAMPLE_PROFILE=ao_sample_profile.c \ +# ao_sample_profile_timer.c +#SAMPLE_PROFILE_DEF=-DHAS_SAMPLE_PROFILE=1 + +#STACK_GUARD=ao_mpu_stm.c +#STACK_GUARD_DEF=-DHAS_STACK_GUARD=1 + +MATH_SRC=\ + ef_log.c + +ALTOS_SRC = \ + ao_boot_chain.c \ + ao_interrupt.c \ + ao_product.c \ + ao_romconfig.c \ + ao_cmd.c \ + ao_config.c \ + ao_task.c \ + ao_led.c \ + ao_stdio.c \ + ao_panic.c \ + ao_timer.c \ + ao_mutex.c \ + ao_serial_stm.c \ + ao_gps_ublox.c \ + ao_gps_show.c \ + ao_gps_report_metrum.c \ + ao_ignite.c \ + ao_freq.c \ + ao_dma_stm.c \ + ao_spi_stm.c \ + ao_cc1120.c \ + ao_fec_tx.c \ + ao_fec_rx.c \ + ao_data.c \ + ao_ms5607.c \ + ao_mma655x.c \ + ao_adc_stm.c \ + ao_beep_stm.c \ + ao_storage.c \ + ao_m25.c \ + ao_usb_stm.c \ + ao_exti_stm.c \ + ao_eeprom_stm.c \ + ao_report.c \ + ao_convert_pa.c \ + ao_convert_volt.c \ + ao_log.c \ + ao_log_metrum.c \ + ao_sample.c \ + ao_kalman.c \ + ao_balloon.c \ + ao_telemetry.c \ + ao_packet_slave.c \ + ao_packet.c \ + ao_companion.c \ + ao_aprs.c \ + $(MATH_SRC) \ + $(PROFILE) \ + $(SAMPLE_PROFILE) \ + $(STACK_GUARD) + +PRODUCT=TeleBalloon-v2.0 +PRODUCT_DEF=-DTELEMETRUM_V_2_0 +IDPRODUCT=0x000b + +CFLAGS = $(PRODUCT_DEF) $(STM_CFLAGS) $(PROFILE_DEF) $(SAMPLE_PROFILE_DEF) $(STACK_GUARD_DEF) -Os -g + +PROGNAME=teleballoon-v2.0 +PROG=$(PROGNAME)-$(VERSION).elf +HEX=$(PROGNAME)-$(VERSION).ihx + +SRC=$(ALTOS_SRC) ao_teleballoon.c +OBJ=$(SRC:.c=.o) + +all: $(PROG) $(HEX) + +$(PROG): Makefile $(OBJ) altos.ld + $(call quiet,CC) $(LDFLAGS) $(CFLAGS) -o $(PROG) $(OBJ) $(LIBS) + +../altitude-pa.h: make-altitude-pa + nickle $< > $@ + +$(OBJ): $(INC) + +ao_product.h: ao-make-product.5c ../Version + $(call quiet,NICKLE,$<) $< -m altusmetrum.org -i $(IDPRODUCT) -p $(PRODUCT) -v $(VERSION) > $@ + +distclean: clean + +clean: + rm -f *.o $(PROGNAME)-*.elf $(PROGNAME)-*.ihx + rm -f ao_product.h + +install: + +uninstall: diff --git a/src/teleballoon-v2.0/ao_pins.h b/src/teleballoon-v2.0/ao_pins.h new file mode 100644 index 00000000..22551d9e --- /dev/null +++ b/src/teleballoon-v2.0/ao_pins.h @@ -0,0 +1,323 @@ +/* + * Copyright © 2012 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef _AO_PINS_H_ +#define _AO_PINS_H_ + +#define HAS_TASK_QUEUE 1 + +/* 8MHz High speed external crystal */ +#define AO_HSE 8000000 + +/* PLLVCO = 96MHz (so that USB will work) */ +#define AO_PLLMUL 12 +#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12) + +/* SYSCLK = 32MHz (no need to go faster than CPU) */ +#define AO_PLLDIV 3 +#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3) + +/* HCLK = 32MHz (CPU clock) */ +#define AO_AHB_PRESCALER 1 +#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1 + +/* Run APB1 at 16MHz (HCLK/2) */ +#define AO_APB1_PRESCALER 2 +#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +/* Run APB2 at 16MHz (HCLK/2) */ +#define AO_APB2_PRESCALER 2 +#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2 + +#define HAS_SERIAL_1 0 +#define USE_SERIAL_1_STDIN 0 +#define SERIAL_1_PB6_PB7 0 +#define SERIAL_1_PA9_PA10 1 + +#define HAS_SERIAL_2 0 +#define USE_SERIAL_2_STDIN 0 +#define SERIAL_2_PA2_PA3 0 +#define SERIAL_2_PD5_PD6 0 + +#define HAS_SERIAL_3 1 +#define USE_SERIAL_3_STDIN 0 +#define SERIAL_3_PB10_PB11 1 +#define SERIAL_3_PC10_PC11 0 +#define SERIAL_3_PD8_PD9 0 + +#define AO_CONFIG_DEFAULT_FLIGHT_LOG_MAX (512 * 1024) +#define HAS_EEPROM 1 +#define USE_INTERNAL_FLASH 0 +#define USE_EEPROM_CONFIG 1 +#define USE_STORAGE_CONFIG 0 +#define HAS_USB 1 +#define HAS_BEEP 1 +#define BEEPER_CHANNEL 4 +#define HAS_RADIO 1 +#define HAS_TELEMETRY 1 +#define HAS_APRS 1 + +#define HAS_SPI_1 1 +#define SPI_1_PA5_PA6_PA7 1 /* Barometer */ +#define SPI_1_PB3_PB4_PB5 1 /* Accelerometer */ +#define SPI_1_PE13_PE14_PE15 0 +#define SPI_1_OSPEEDR STM_OSPEEDR_10MHz + +#define HAS_SPI_2 1 +#define SPI_2_PB13_PB14_PB15 1 /* Flash, Companion, Radio */ +#define SPI_2_PD1_PD3_PD4 0 +#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz + +#define SPI_2_PORT (&stm_gpiob) +#define SPI_2_SCK_PIN 13 +#define SPI_2_MISO_PIN 14 +#define SPI_2_MOSI_PIN 15 + +#define HAS_I2C_1 0 +#define I2C_1_PB8_PB9 0 + +#define HAS_I2C_2 0 +#define I2C_2_PB10_PB11 0 + +#define PACKET_HAS_SLAVE 1 +#define PACKET_HAS_MASTER 0 + +#define LOW_LEVEL_DEBUG 0 + +#define LED_PORT_ENABLE STM_RCC_AHBENR_GPIOCEN +#define LED_PORT (&stm_gpioc) +#define LED_PIN_RED 14 +#define LED_PIN_GREEN 15 +#define AO_LED_RED (1 << LED_PIN_RED) +#define AO_LED_GREEN (1 << LED_PIN_GREEN) + +#define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN) + +#define HAS_GPS 1 +#define HAS_FLIGHT 1 +#define HAS_ADC 1 +#define HAS_ADC_TEMP 1 +#define HAS_LOG 1 +#define AO_USB_FORCE_IDLE 0 + +/* + * Igniter + */ + +#define HAS_IGNITE 0 +#define HAS_IGNITE_REPORT 0 + +#define AO_SENSE_DROGUE(p) ((p)->adc.sense_a) +#define AO_SENSE_MAIN(p) ((p)->adc.sense_m) +#define AO_IGNITER_CLOSED 400 +#define AO_IGNITER_OPEN 60 + +/* Drogue */ +#define AO_IGNITER_DROGUE_PORT (&stm_gpioa) +#define AO_IGNITER_DROGUE_PIN 8 + +/* Main */ +#define AO_IGNITER_MAIN_PORT (&stm_gpioa) +#define AO_IGNITER_MAIN_PIN 9 + +#define AO_IGNITER_SET_DROGUE(v) stm_gpio_set(AO_IGNITER_DROGUE_PORT, AO_IGNITER_DROGUE_PIN, v) +#define AO_IGNITER_SET_MAIN(v) stm_gpio_set(AO_IGNITER_MAIN_PORT, AO_IGNITER_MAIN_PIN, v) + +/* + * ADC + */ +#define AO_DATA_RING 32 +#define AO_ADC_NUM_SENSE 2 + +struct ao_adc { + int16_t sense_a; + int16_t sense_m; + int16_t v_batt; + int16_t temp; +}; + +#define AO_ADC_DUMP(p) \ + printf("tick: %5u drogue: %5d main: %5d batt: %5d\n", \ + (p)->tick, \ + (p)->adc.sense_a, (p)->adc.sense_m, \ + (p)->adc.v_batt); + +#define AO_ADC_SENSE_DROGUE 0 +#define AO_ADC_SENSE_DROGUE_PORT (&stm_gpioa) +#define AO_ADC_SENSE_DROGUE_PIN 0 + +#define AO_ADC_SENSE_MAIN 1 +#define AO_ADC_SENSE_MAIN_PORT (&stm_gpioa) +#define AO_ADC_SENSE_MAIN_PIN 1 + +#define AO_ADC_V_BATT 8 +#define AO_ADC_V_BATT_PORT (&stm_gpiob) +#define AO_ADC_V_BATT_PIN 0 + +#define AO_ADC_TEMP 16 + +#define AO_ADC_RCC_AHBENR ((1 << STM_RCC_AHBENR_GPIOAEN) | \ + (1 << STM_RCC_AHBENR_GPIOEEN) | \ + (1 << STM_RCC_AHBENR_GPIOBEN)) + +#define AO_NUM_ADC_PIN 3 + +#define AO_ADC_PIN0_PORT AO_ADC_SENSE_DROGUE_PORT +#define AO_ADC_PIN0_PIN AO_ADC_SENSE_DROGUE_PIN +#define AO_ADC_PIN1_PORT AO_ADC_SENSE_MAIN_PORT +#define AO_ADC_PIN1_PIN AO_ADC_SENSE_MAIN_PIN +#define AO_ADC_PIN2_PORT AO_ADC_V_BATT_PORT +#define AO_ADC_PIN2_PIN AO_ADC_V_BATT_PIN + +#define AO_NUM_ADC (AO_NUM_ADC_PIN + 1) + +#define AO_ADC_SQ1 AO_ADC_SENSE_DROGUE +#define AO_ADC_SQ2 AO_ADC_SENSE_MAIN +#define AO_ADC_SQ3 AO_ADC_V_BATT +#define AO_ADC_SQ4 AO_ADC_TEMP + +/* + * Voltage divider on ADC battery sampler + */ +#define AO_BATTERY_DIV_PLUS 56 /* 5.6k */ +#define AO_BATTERY_DIV_MINUS 100 /* 10k */ + +/* + * Voltage divider on ADC igniter samplers + */ +#define AO_IGNITE_DIV_PLUS 100 /* 100k */ +#define AO_IGNITE_DIV_MINUS 27 /* 27k */ + +/* + * ADC reference in decivolts + */ +#define AO_ADC_REFERENCE_DV 33 + +/* + * GPS + */ + +#define AO_SERIAL_SPEED_UBLOX AO_SERIAL_SPEED_9600 + +#define ao_gps_getchar ao_serial3_getchar +#define ao_gps_putchar ao_serial3_putchar +#define ao_gps_set_speed ao_serial3_set_speed +#define ao_gps_fifo (ao_stm_usart3.rx_fifo) + +/* + * Pressure sensor settings + */ +#define HAS_MS5607 1 +#define HAS_MS5611 0 +#define AO_MS5607_PRIVATE_PINS 1 +#define AO_MS5607_CS_PORT (&stm_gpiob) +#define AO_MS5607_CS_PIN 12 +#define AO_MS5607_CS_MASK (1 << AO_MS5607_CS) +#define AO_MS5607_MISO_PORT (&stm_gpioa) +#define AO_MS5607_MISO_PIN 6 +#define AO_MS5607_MISO_MASK (1 << AO_MS5607_MISO) +#define AO_MS5607_SPI_INDEX AO_SPI_1_PA5_PA6_PA7 + +/* + * SPI Flash memory + */ + +#define M25_MAX_CHIPS 1 +#define AO_M25_SPI_CS_PORT (&stm_gpiob) +#define AO_M25_SPI_CS_MASK (1 << 8) +#define AO_M25_SPI_BUS AO_SPI_2_PB13_PB14_PB15 + +/* + * Radio (cc1120) + */ + +/* gets pretty close to 434.550 */ + +#define AO_RADIO_CAL_DEFAULT 0x6ca333 + +#define AO_FEC_DEBUG 0 +#define AO_CC1120_SPI_CS_PORT (&stm_gpioa) +#define AO_CC1120_SPI_CS_PIN 2 +#define AO_CC1120_SPI_BUS AO_SPI_2_PB13_PB14_PB15 +#define AO_CC1120_SPI stm_spi2 + +#define AO_CC1120_INT_PORT (&stm_gpioa) +#define AO_CC1120_INT_PIN (3) +#define AO_CC1120_MCU_WAKEUP_PORT (&stm_gpioa) +#define AO_CC1120_MCU_WAKEUP_PIN (4) + +#define AO_CC1120_INT_GPIO 2 +#define AO_CC1120_INT_GPIO_IOCFG CC1120_IOCFG2 + +#define AO_CC1120_MARC_GPIO 3 +#define AO_CC1120_MARC_GPIO_IOCFG CC1120_IOCFG3 + +#define HAS_BOOT_RADIO 0 + +#define HAS_HIGHG_ACCEL 0 + +/* Disable accelerometer for balloon mode */ + +#define HAS_ACCEL 0 + +/* + * mma655x + */ + +#define HAS_MMA655X 0 +#define AO_MMA655X_SPI_INDEX AO_SPI_1_PB3_PB4_PB5 +#define AO_MMA655X_CS_PORT (&stm_gpiob) +#define AO_MMA655X_CS_PIN 9 +#define AO_MMA655X_INVERT 1 + +#define NUM_CMDS 16 + +/* + * Companion + */ + +#define AO_COMPANION_CS_PORT (&stm_gpiob) +#define AO_COMPANION_CS_PIN (6) +#define AO_COMPANION_SPI_BUS AO_SPI_2_PB13_PB14_PB15 + +/* + * Monitor + */ + +#define HAS_MONITOR 0 +#define LEGACY_MONITOR 0 +#define HAS_MONITOR_PUT 1 +#define AO_MONITOR_LED 0 +#define HAS_RSSI 0 + +/* + * Profiling Viterbi decoding + */ + +#ifndef AO_PROFILE +#define AO_PROFILE 0 +#endif + +/* + * Teleballoon-specific bits + */ + +#define AO_TELEMETRY_INTERVAL_BALLOON AO_MS_TO_TICKS(1000) + +#define AO_SEND_METRUM 1 + +#endif /* _AO_PINS_H_ */ diff --git a/src/teleballoon-v2.0/ao_teleballoon.c b/src/teleballoon-v2.0/ao_teleballoon.c new file mode 100644 index 00000000..9b506814 --- /dev/null +++ b/src/teleballoon-v2.0/ao_teleballoon.c @@ -0,0 +1,92 @@ +/* + * Copyright © 2011 Keith Packard <keithp@keithp.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include <ao.h> +#include <ao_ms5607.h> +#include <ao_mma655x.h> +#include <ao_log.h> +#include <ao_exti.h> +#include <ao_packet.h> +#include <ao_companion.h> +#include <ao_eeprom.h> +#include <ao_profile.h> +#if HAS_SAMPLE_PROFILE +#include <ao_sample_profile.h> +#endif +#if HAS_STACK_GUARD +#include <ao_mpu.h> +#endif + +int +main(void) +{ + ao_clock_init(); + +#if HAS_STACK_GUARD + ao_mpu_init(); +#endif + + ao_task_init(); + ao_serial_init(); + ao_led_init(LEDS_AVAILABLE); + ao_led_on(AO_LED_RED); + ao_timer_init(); + + ao_spi_init(); + ao_dma_init(); + ao_exti_init(); + + ao_adc_init(); +#if HAS_BEEP + ao_beep_init(); +#endif + ao_cmd_init(); + +#if HAS_MS5607 + ao_ms5607_init(); +#endif +#if HAS_MMA655X + ao_mma655x_init(); +#endif + + ao_eeprom_init(); + + ao_storage_init(); + + ao_flight_init(); + ao_log_init(); + ao_report_init(); + + ao_usb_init(); + ao_gps_init(); + ao_gps_report_metrum_init(); + ao_telemetry_init(); + ao_radio_init(); + ao_packet_slave_init(FALSE); + ao_companion_init(); + + ao_config_init(); +#if AO_PROFILE + ao_profile_init(); +#endif +#if HAS_SAMPLE_PROFILE + ao_sample_profile_init(); +#endif + + ao_start_scheduler(); + return 0; +} |