diff options
| -rw-r--r-- | doc/altosui.inc | 12 | ||||
| -rw-r--r-- | doc/aprs-operation.inc | 2 | ||||
| -rw-r--r-- | doc/telegps-application.inc | 4 | ||||
| -rw-r--r-- | doc/telegps-system-operation.inc | 7 |
4 files changed, 11 insertions, 14 deletions
diff --git a/doc/altosui.inc b/doc/altosui.inc index df5a3cee..3c26b441 100644 --- a/doc/altosui.inc +++ b/doc/altosui.inc @@ -315,9 +315,9 @@ data will be downloaded from that device directly. If you select a TeleDongle device, flight data will be downloaded from a flight computer over radio link via - the specified TeleDongle. See the chapter on - Controlling An Altimeter Over The Radio Link for more - information. + the specified TeleDongle. See + <<_controlling_an_altimeter_over_the_radio_link>> for + more information. After the device has been selected, a dialog showing the flight data saved in the device will be shown @@ -343,7 +343,7 @@ Once a flight record is selected, the flight monitor interface is displayed and the flight is re-enacted in real time. Check - the Monitor Flight chapter above to learn how this window operates. + <<_monitor_flight>> to learn how this window operates. === Graph Data @@ -567,8 +567,8 @@ programming). TeleMega, EasyMega, TeleMetrum v2, EasyMini and TeleDongle v3 are all programmed directly over their USB ports (self programming). Please read - the directions for flashing devices in the Updating - Device Firmware chapter below. + the directions for flashing devices in + <<_updating_device_firmware>>. === Fire Igniter diff --git a/doc/aprs-operation.inc b/doc/aprs-operation.inc index e514e110..9b1d91eb 100644 --- a/doc/aprs-operation.inc +++ b/doc/aprs-operation.inc @@ -6,7 +6,7 @@ interval of at least 5 seconds to avoid consuming too much battery power or radio channel bandwidth. You can configure the APRS interval using {application}; that process is described in - <<{configure_section}>> in the {application} chapter. + <<{configure_section}>>. AltOS supports both compressed and uncompressed APRS position report data formats. The compressed format diff --git a/doc/telegps-application.inc b/doc/telegps-application.inc index 41dda968..3e6b385e 100644 --- a/doc/telegps-application.inc +++ b/doc/telegps-application.inc @@ -342,12 +342,10 @@ The rest of the dialog contains the parameters to be configured. - The rest of the dialog contains the parameters to be configured. - include::config-device.raw[] === Flash Device This reprograms TeleGPS devices with new firmware. Please read the directions for flashing - devices in the Updating Device Firmware chapter below. + devices in <<_updating_device_firmware>>. diff --git a/doc/telegps-system-operation.inc b/doc/telegps-system-operation.inc index 40ab467c..c9fce7f0 100644 --- a/doc/telegps-system-operation.inc +++ b/doc/telegps-system-operation.inc @@ -25,7 +25,6 @@ === Configurable Parameters - Configuring TeleGPS is very - simple; the few configurable parameters can all be set - using the TeleGPS application over USB. Read - the Configure TeleGPS section in the TeleGPS Software chapter + Configuring TeleGPS is very simple; the few configurable + parameters can all be set using the TeleGPS application over + USB. Check out <<_configure_device>>. |