summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/micropeak-v2.0/ao_pins.h3
-rw-r--r--src/stm/ao_serial_stm.c17
-rw-r--r--src/stmf0/ao_serial_stm.c74
3 files changed, 42 insertions, 52 deletions
diff --git a/src/micropeak-v2.0/ao_pins.h b/src/micropeak-v2.0/ao_pins.h
index 13a4fd10..fa2ed804 100644
--- a/src/micropeak-v2.0/ao_pins.h
+++ b/src/micropeak-v2.0/ao_pins.h
@@ -53,7 +53,8 @@ extern uint8_t ao_on_battery;
#define HAS_SERIAL_1 0
#define HAS_SERIAL_2 1
#define USE_SERIAL_2_STDIN 0
-#define HAS_SERIAL_SW_FLOW 0
+#define USE_SERIAL_2_FLOW 0
+#define USE_SERIAL_2_SW_FLOW 0
#define SERIAL_2_PA2_PA3 1
#define SERIAL_2_PA14_PA15 0
#define USE_SERIAL2_FLOW 0
diff --git a/src/stm/ao_serial_stm.c b/src/stm/ao_serial_stm.c
index c625471e..ef562313 100644
--- a/src/stm/ao_serial_stm.c
+++ b/src/stm/ao_serial_stm.c
@@ -195,7 +195,7 @@ ao_usart_set_speed(struct ao_stm_usart *usart, uint8_t speed)
}
static void
-ao_usart_init(struct ao_stm_usart *usart)
+ao_usart_init(struct ao_stm_usart *usart, int hw_flow)
{
usart->reg->cr1 = ((0 << STM_USART_CR1_OVER8) |
(1 << STM_USART_CR1_UE) |
@@ -236,6 +236,10 @@ ao_usart_init(struct ao_stm_usart *usart)
(0 << STM_USART_CR3_IREN) |
(0 << STM_USART_CR3_EIE));
+ if (hw_flow)
+ usart->reg->cr3 |= ((1 << STM_USART_CR3_CTSE) |
+ (1 << STM_USART_CR3_RTSE));
+
/* Pick a 9600 baud rate */
ao_usart_set_speed(usart, AO_SERIAL_SPEED_9600);
}
@@ -244,8 +248,6 @@ ao_usart_init(struct ao_stm_usart *usart)
static void
ao_usart_set_flow(struct ao_stm_usart *usart)
{
- usart->reg->cr3 |= ((1 << STM_USART_CR3_CTSE) |
- (1 << STM_USART_CR3_RTSE));
}
#endif
@@ -441,7 +443,7 @@ ao_serial_init(void)
stm_rcc.apb2enr |= (1 << STM_RCC_APB2ENR_USART1EN);
ao_stm_usart1.reg = &stm_usart1;
- ao_usart_init(&ao_stm_usart1);
+ ao_usart_init(&ao_stm_usart1, 0);
stm_nvic_set_enable(STM_ISR_USART1_POS);
stm_nvic_set_priority(STM_ISR_USART1_POS, AO_STM_NVIC_MED_PRIORITY);
@@ -494,10 +496,7 @@ ao_serial_init(void)
stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_USART2EN);
ao_stm_usart2.reg = &stm_usart2;
- ao_usart_init(&ao_stm_usart2);
-#if USE_SERIAL_2_FLOW && !USE_SERIAL_2_SW_FLOW
- ao_usart_set_flow(&ao_stm_usart2);
-#endif
+ ao_usart_init(&ao_stm_usart2, USE_SERIAL_2_FLOW && !USE_SERIAL_2_SW_FLOW);
stm_nvic_set_enable(STM_ISR_USART2_POS);
stm_nvic_set_priority(STM_ISR_USART2_POS, AO_STM_NVIC_MED_PRIORITY);
@@ -541,7 +540,7 @@ ao_serial_init(void)
stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_USART3EN);
ao_stm_usart3.reg = &stm_usart3;
- ao_usart_init(&ao_stm_usart3);
+ ao_usart_init(&ao_stm_usart3, 0);
stm_nvic_set_enable(STM_ISR_USART3_POS);
stm_nvic_set_priority(STM_ISR_USART3_POS, AO_STM_NVIC_MED_PRIORITY);
diff --git a/src/stmf0/ao_serial_stm.c b/src/stmf0/ao_serial_stm.c
index e20b5755..59cfde2e 100644
--- a/src/stmf0/ao_serial_stm.c
+++ b/src/stmf0/ao_serial_stm.c
@@ -180,7 +180,7 @@ ao_usart_set_speed(struct ao_stm_usart *usart, uint8_t speed)
}
static void
-ao_usart_init(struct ao_stm_usart *usart)
+ao_usart_init(struct ao_stm_usart *usart, int hw_flow)
{
usart->reg->cr1 = ((0 << STM_USART_CR1_M1) |
(0 << STM_USART_CR1_EOBIE) |
@@ -223,44 +223,39 @@ ao_usart_init(struct ao_stm_usart *usart)
(0 << STM_USART_CR2_LBDL) |
(0 << STM_USART_CR2_ADDM7));
- usart->reg->cr3 = ((0 << STM_USART_CR3_WUFIE) |
- (0 << STM_USART_CR3_WUS) |
- (0 << STM_USART_CR3_SCARCNT) |
- (0 << STM_USART_CR3_DEP) |
- (0 << STM_USART_CR3_DEM) |
- (0 << STM_USART_CR3_DDRE) |
- (0 << STM_USART_CR3_OVRDIS) |
- (0 << STM_USART_CR3_ONEBIT) |
- (0 << STM_USART_CR3_CTIIE) |
- (0 << STM_USART_CR3_CTSE) |
- (0 << STM_USART_CR3_RTSE) |
- (0 << STM_USART_CR3_DMAT) |
- (0 << STM_USART_CR3_DMAR) |
- (0 << STM_USART_CR3_SCEN) |
- (0 << STM_USART_CR3_NACK) |
- (0 << STM_USART_CR3_HDSEL) |
- (0 << STM_USART_CR3_IRLP) |
- (0 << STM_USART_CR3_IREN) |
- (0 << STM_USART_CR3_EIE));
-
+ uint32_t cr3 = ((0 << STM_USART_CR3_WUFIE) |
+ (0 << STM_USART_CR3_WUS) |
+ (0 << STM_USART_CR3_SCARCNT) |
+ (0 << STM_USART_CR3_DEP) |
+ (0 << STM_USART_CR3_DEM) |
+ (0 << STM_USART_CR3_DDRE) |
+ (0 << STM_USART_CR3_OVRDIS) |
+ (0 << STM_USART_CR3_ONEBIT) |
+ (0 << STM_USART_CR3_CTIIE) |
+ (0 << STM_USART_CR3_CTSE) |
+ (0 << STM_USART_CR3_RTSE) |
+ (0 << STM_USART_CR3_DMAT) |
+ (0 << STM_USART_CR3_DMAR) |
+ (0 << STM_USART_CR3_SCEN) |
+ (0 << STM_USART_CR3_NACK) |
+ (0 << STM_USART_CR3_HDSEL) |
+ (0 << STM_USART_CR3_IRLP) |
+ (0 << STM_USART_CR3_IREN) |
+ (0 << STM_USART_CR3_EIE));
+
+ if (hw_flow)
+ cr3 |= ((1 << STM_USART_CR3_CTSE) |
+ (1 << STM_USART_CR3_RTSE));
+
+ usart->reg->cr3 = cr3;
/* Pick a 9600 baud rate */
ao_usart_set_speed(usart, AO_SERIAL_SPEED_9600);
/* Enable the usart */
usart->reg->cr1 |= (1 << STM_USART_CR1_UE);
-
}
-#if HAS_SERIAL_HW_FLOW
-static void
-ao_usart_set_flow(struct ao_stm_usart *usart)
-{
- usart->reg->cr3 |= ((1 << STM_USART_CR3_CTSE) |
- (1 << STM_USART_CR3_RTSE));
-}
-#endif
-
#if HAS_SERIAL_1
struct ao_stm_usart ao_stm_usart1;
@@ -391,13 +386,13 @@ ao_serial_init(void)
*/
#if SERIAL_1_PA9_PA10
- stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_IOPAEN);
+ ao_enable_port(&stm_gpioa);
stm_afr_set(&stm_gpioa, 9, STM_AFR_AF1);
stm_afr_set(&stm_gpioa, 10, STM_AFR_AF1);
#else
#if SERIAL_1_PB6_PB7
- stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_IOPBEN);
+ ao_enable_port(&stm_gpiob);
stm_afr_set(&stm_gpiob, 6, STM_AFR_AF0);
stm_afr_set(&stm_gpiob, 7, STM_AFR_AF0);
@@ -409,7 +404,7 @@ ao_serial_init(void)
stm_rcc.apb2enr |= (1 << STM_RCC_APB2ENR_USART1EN);
ao_stm_usart1.reg = &stm_usart1;
- ao_usart_init(&ao_stm_usart1);
+ ao_usart_init(&ao_stm_usart1, 0);
stm_nvic_set_enable(STM_ISR_USART1_POS);
stm_nvic_set_priority(STM_ISR_USART1_POS, 4);
@@ -428,8 +423,7 @@ ao_serial_init(void)
*/
# if SERIAL_2_PA2_PA3
- stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_IOPAEN);
-
+ ao_enable_port(&stm_gpioa);
stm_afr_set(&stm_gpioa, 2, STM_AFR_AF1);
stm_afr_set(&stm_gpioa, 3, STM_AFR_AF1);
# if USE_SERIAL_2_FLOW
@@ -447,8 +441,7 @@ ao_serial_init(void)
# endif
# else
# if SERIAL_2_PA14_PA15
- stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_IOPAEN);
-
+ ao_enable_port(&stm_gpioa);
stm_afr_set(&stm_gpioa, 14, STM_AFR_AF1);
stm_afr_set(&stm_gpioa, 15, STM_AFR_AF1);
# if USE_SERIAL_2_FLOW
@@ -472,10 +465,7 @@ ao_serial_init(void)
stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_USART2EN);
ao_stm_usart2.reg = &stm_usart2;
- ao_usart_init(&ao_stm_usart2);
-# if USE_SERIAL_2_FLOW && !USE_SERIAL_2_SW_FLOW
- ao_usart_set_flow(&ao_stm_usart2);
-# endif
+ ao_usart_init(&ao_stm_usart2, USE_SERIAL_2_FLOW && !USE_SERIAL_2_SW_FLOW);
stm_nvic_set_enable(STM_ISR_USART2_POS);
stm_nvic_set_priority(STM_ISR_USART2_POS, 4);
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-31 19:35:09 +0000