altos: Remove cc1111 products

We're not testing these anyways; building new firmware for them is not helpful.

Signed-off-by: Keith Packard <keithp@keithp.com>

5 files changed, 0 insertions, 432 deletions

diff --git a/src/teleshield-v0.1/.gitignore b/src/teleshield-v0.1/.gitignore
deleted file mode 100644
index 3ae78d33..00000000
--- a/src/teleshield-v0.1/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-teleshield-*
-ao_product.h
diff --git a/src/teleshield-v0.1/Makefile b/src/teleshield-v0.1/Makefile
deleted file mode 100644
index f54488a2..00000000
--- a/src/teleshield-v0.1/Makefile
+++ /dev/null
@@ -1,111 +0,0 @@
-#
-# TeleShield build file
-#
-# The various telemetrum versions differ only
-# in which flash and GPS drivers are included,
-# so the per-board makefiles simply define
-# TM_VER, TM_DEF, TM_INC and TM_SRC and include
-# this file
-
-TELESHIELD_VER=0.1
-TELESHIELD_DEF=0_1
-
-TELESHIELD_INC =
-
-TELESHIELD_SRC = \
-	ao_beep.c \
-	ao_btm.c \
-	ao_spi.c
-
-vpath %.c ..:../kernel:../cc1111:../drivers:../product:.
-vpath %.h ..:../kernel:../cc1111:../drivers:../product:.
-vpath ao-make-product.5c ../util
-
-ifndef VERSION
-include ../Version
-endif
-
-INC = \
-	ao.h \
-	ao_pins.h \
-	cc1111.h \
-	ao_product.h \
-	$(TELESHIELD_INC)
-
-CORE_SRC = \
-	ao_cmd.c \
-	ao_config.c \
-	ao_monitor.c \
-	ao_mutex.c \
-	ao_panic.c \
-	ao_state.c \
-	ao_storage.c \
-	ao_stdio.c \
-	ao_task.c \
-	ao_freq.c
-
-CC1111_SRC = \
-	ao_dbg.c \
-	ao_dma.c \
-	ao_led.c \
-	ao_intflash.c \
-	ao_packet.c \
-	ao_packet_slave.c \
-	ao_radio.c \
-	ao_romconfig.c \
-	ao_serial.c \
-	ao_string.c \
-	ao_timer.c \
-	ao_usb.c \
-	_bp.c
-
-DRIVER_SRC = \
-	$(TELESHIELD_SRC)
-
-PRODUCT_SRC = \
-	ao_teleshield.c \
-	ao_ardu_serial.c
-
-SRC = \
-	$(CORE_SRC) \
-	$(CC1111_SRC) \
-	$(DRIVER_SRC) \
-	$(PRODUCT_SRC)
-
-PROGNAME = teleshield-v$(TELESHIELD_VER)
-PROG = $(PROGNAME)-$(VERSION).ihx
-PRODUCT=TeleShield-v$(TELESHIELD_VER)
-PRODUCT_DEF=-DTELESHIELD_V_$(TELESHIELD_DEF)
-IDPRODUCT=0x0013
-CODESIZE=0x7800
-
-include ../cc1111/Makefile.cc1111
-
-NICKLE=nickle
-CHECK_STACK=sh ../util/check-stack
-
-V=0
-# The user has explicitly enabled quiet compilation.
-ifeq ($(V),0)
-quiet = @printf "  $1 $2 $@\n"; $($1)
-endif
-# Otherwise, print the full command line.
-quiet ?= $($1)
-
-all: $(PROG)
-
-$(PROG): $(REL) Makefile
-	$(call quiet,CC) $(LDFLAGS) $(CFLAGS) -o $(PROG) $(REL)
-	$(call quiet,CHECK_STACK) ../cc1111/ao_arch.h $(PMEM) || rm $@
-
-ao_product.h: ao-make-product.5c ../Version
-	$(call quiet,NICKLE,$<) $< -m altusmetrum.org -i $(IDPRODUCT) -p $(PRODUCT) -v $(VERSION) > $@
-
-distclean:	clean
-
-clean: clean-cc1111
-
-install:
-
-uninstall:
-
diff --git a/src/teleshield-v0.1/ao_ardu_serial.c b/src/teleshield-v0.1/ao_ardu_serial.c
deleted file mode 100644
index 535cc624..00000000
--- a/src/teleshield-v0.1/ao_ardu_serial.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright © 2011 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-#include "ao.h"
-
-static void
-ao_ardu_serial_recv(void)
-{
-	char	c;
-
-	for (;;) {
-		if (ao_fifo_empty(ao_serial0_rx_fifo))
-			flush();
-		c = ao_serial0_getchar();
-		putchar (c);
-	}
-}
-
-static __xdata struct ao_task ao_ardu_serial_recv_task;
-
-void
-ao_ardu_serial_init (void)
-{
-	ao_add_task(&ao_ardu_serial_recv_task, ao_ardu_serial_recv, "recv");
-}
diff --git a/src/teleshield-v0.1/ao_pins.h b/src/teleshield-v0.1/ao_pins.h
deleted file mode 100644
index 6baa88c8..00000000
--- a/src/teleshield-v0.1/ao_pins.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright © 2010 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-#ifndef _AO_PINS_H_
-#define _AO_PINS_H_
-
-#if defined(TELESHIELD_V_0_1)
-	#define HAS_FLIGHT		0
-	#define HAS_USB			1
-	#define HAS_BEEP		0
-	#define HAS_SERIAL_1		1
-	#define HAS_SERIAL_1_ALT_1	1
-	#define HAS_SERIAL_1_ALT_2	0
-	#define HAS_SERIAL_1_HW_FLOW	1
-	#define USE_SERIAL_1_STDIN	1
-	#define HAS_SERIAL_0		1
-	#define HAS_SERIAL_0_ALT_1	0
-	#define HAS_SERIAL_0_ALT_2	1
-	#define HAS_SERIAL_0_HW_FLOW	0
-	#define HAS_ADC			0
-	#define HAS_DBG			1
-	#define HAS_EEPROM		1
-	#define HAS_LOG			0
-	#define USE_INTERNAL_FLASH	1
-	#define HAS_BTM			1
-	#define DBG_ON_P1 		1
-	#define DBG_ON_P0 		0
-	#define IGNITE_ON_P2		0
-	#define IGNITE_ON_P0		0
-	#define PACKET_HAS_MASTER	0
-	#define PACKET_HAS_SLAVE	1
-	#define AO_LED_RED		1
-	#define AO_LED_GREEN		2
-	#define AO_MONITOR_LED		AO_LED_RED
-	#define AO_BT_LED		AO_LED_GREEN
-	#define LEDS_AVAILABLE		(AO_LED_RED|AO_LED_GREEN)
-	#define SPI_CS_ON_P1		1
-	#define SPI_CS_ON_P0		0
-	#define HAS_ACCEL		0
-	#define HAS_IGNITE		0
-	#define HAS_IGNITE_REPORT	0
-	#define BT_LINK_ON_P2		0
-	#define BT_LINK_ON_P1		1
-	#define BT_LINK_PIN_INDEX	7
-	#define BT_LINK_PIN		P1_7
-	#define HAS_MONITOR		1
-	#define LEGACY_MONITOR		0
-	#define HAS_RSSI		0
-	#define HAS_AES			0
-	#define HAS_RADIO		1
-	#define HAS_TELEMETRY		0
-#endif
-
-#if DBG_ON_P1
-
-	#define DBG_CLOCK	(1 << 4)	/* mi0 */
-	#define DBG_DATA	(1 << 5)	/* mo0 */
-	#define DBG_RESET_N	(1 << 3)	/* c0 */
-
-	#define DBG_CLOCK_PIN	(P1_4)
-	#define DBG_DATA_PIN	(P1_5)
-	#define DBG_RESET_N_PIN	(P1_3)
-
-	#define DBG_PORT_NUM	1
-	#define DBG_PORT	P1
-	#define DBG_PORT_SEL	P1SEL
-	#define DBG_PORT_INP	P1INP
-	#define DBG_PORT_DIR	P1DIR
-
-#endif /* DBG_ON_P1 */
-
-#if DBG_ON_P0
-
-	#define DBG_CLOCK	(1 << 3)
-	#define DBG_DATA	(1 << 4)
-	#define DBG_RESET_N	(1 << 5)
-
-	#define DBG_CLOCK_PIN	(P0_3)
-	#define DBG_DATA_PIN	(P0_4)
-	#define DBG_RESET_N_PIN	(P0_5)
-
-	#define DBG_PORT_NUM	0
-	#define DBG_PORT	P0
-	#define DBG_PORT_SEL	P0SEL
-	#define DBG_PORT_INP	P0INP
-	#define DBG_PORT_DIR	P0DIR
-
-#endif /* DBG_ON_P0 */
-
-#if COMPANION_CS_ON_P1
-	#define COMPANION_CS_PORT	P1
-	#define COMPANION_CS_SEL	P1SEL
-	#define COMPANION_CS_DIR	P1DIR
-#endif
-
-#if SPI_CS_ON_P1
-	#define SPI_CS_PORT	P1
-	#define SPI_CS_SEL	P1SEL
-	#define SPI_CS_DIR	P1DIR
-#endif
-
-#if SPI_CS_ON_P0
-	#define SPI_CS_PORT	P0
-	#define SPI_CS_SEL	P0SEL
-	#define SPI_CS_DIR	P0DIR
-#endif
-
-#ifndef IGNITE_ON_P2
-#error Please define IGNITE_ON_P2
-#endif
-
-#ifndef IGNITE_ON_P0
-#error Please define IGNITE_ON_P0
-#endif
-
-#ifndef HAS_SERIAL_1
-#error Please define HAS_SERIAL_1
-#endif
-
-#ifndef HAS_ADC
-#error Please define HAS_ADC
-#endif
-
-#ifndef HAS_EEPROM
-#error Please define HAS_EEPROM
-#endif
-
-#ifndef HAS_LOG
-#error Please define HAS_LOG
-#endif
-
-#if HAS_EEPROM
-#ifndef USE_INTERNAL_FLASH
-#error Please define USE_INTERNAL_FLASH
-#endif
-#endif
-
-#ifndef HAS_DBG
-#error Please define HAS_DBG
-#endif
-
-#ifndef HAS_IGNITE
-#error Please define HAS_IGNITE
-#endif
-
-#if HAS_IGNITE
-#define HAS_IGNITE_REPORT 1
-#endif
-
-#ifndef PACKET_HAS_MASTER
-#error Please define PACKET_HAS_MASTER
-#endif
-
-#ifndef PACKET_HAS_SLAVE
-#error Please define PACKET_HAS_SLAVE
-#endif
-
-#ifndef HAS_MONITOR
-#error Please define HAS_MONITOR
-#endif
-
-#if HAS_MONITOR
-#ifndef HAS_RSSI
-#error Please define HAS_RSSI
-#endif
-#endif
-
-#ifndef HAS_ADC
-#error Please define HAS_ADC
-#endif
-
-#if HAS_ADC
-
-#if HAS_ACCEL
-#ifndef HAS_ACCEL_REF
-#error Please define HAS_ACCEL_REF
-#endif
-#else
-#define HAS_ACCEL_REF 0
-#endif
-
-#endif /* HAS_ADC */
-
-#if IGNITE_ON_P2
-#define AO_IGNITER_DROGUE	P2_3
-#define AO_IGNITER_MAIN		P2_4
-#define AO_IGNITER_DIR		P2DIR
-#define AO_IGNITER_DROGUE_BIT	(1 << 3)
-#define AO_IGNITER_MAIN_BIT	(1 << 4)
-#endif
-
-#if IGNITE_ON_P0
-#define AO_IGNITER_DROGUE	P0_5
-#define AO_IGNITER_MAIN		P0_4
-#define AO_IGNITER_DIR		P0DIR
-#define AO_IGNITER_DROGUE_BIT	(1 << 5)
-#define AO_IGNITER_MAIN_BIT	(1 << 4)
-#endif
-
-/* test these values with real igniters */
-#define AO_IGNITER_OPEN		1000
-#define AO_IGNITER_CLOSED	7000
-#define AO_IGNITER_FIRE_TIME	AO_MS_TO_TICKS(50)
-#define AO_IGNITER_CHARGE_TIME	AO_MS_TO_TICKS(2000)
-
-void
-ao_ardu_serial_init (void);
-
-
-#endif /* _AO_PINS_H_ */
diff --git a/src/teleshield-v0.1/ao_teleshield.c b/src/teleshield-v0.1/ao_teleshield.c
deleted file mode 100644
index 713c49f9..00000000
--- a/src/teleshield-v0.1/ao_teleshield.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright © 2011 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-#include "ao.h"
-
-#if 0
-__code uint8_t ao_log_format = AO_LOG_FORMAT_NONE;	/* until we actually log stuff */
-#endif
-
-void
-main(void)
-{
-	ao_clock_init();
-
-	/* Turn on the LED until the system is stable */
-	ao_led_init(LEDS_AVAILABLE);
-	ao_led_on(AO_LED_RED);
-	ao_task_init();
-	ao_timer_init();
-	ao_cmd_init();
-	ao_spi_init();
-	ao_storage_init();
-	ao_usb_init();
-	ao_monitor_init();
-	ao_radio_init();
-	ao_packet_slave_init(1);
-	ao_btm_init();
-#if HAS_DBG
-	ao_dbg_init();
-#endif
-#if HAS_AES
-	ao_aes_init();
-	ao_radio_cmac_init();
-#endif
-	ao_serial_init();
-	ao_ardu_serial_init();
-	ao_config_init();
-	ao_start_scheduler();
-}