diff options
| author | Keith Packard <keithp@keithp.com> | 2013-03-29 17:05:36 -0700 |
|---|---|---|
| committer | Keith Packard <keithp@keithp.com> | 2013-03-29 17:05:36 -0700 |
| commit | 93a9aa703a0173e13b327ed432e6d52e90ebfa1b (patch) | |
| tree | ba7136232c7146abc43132a73683df7a4a966c58 /src/telegps-v0.1/ao_pins.h | |
| parent | 9aeed244879f90b5b6dab1c7ca095cc001b03fe5 (diff) | |
altos: Get CC115L radio working.
This involved figuring out which GPIO signal would reliably indicate
that the transmitter was finished; I ended up using the PA_PD bit for
this.
This also converts all of the radio users to the long packet support
as the CC115L has only a 64-byte fifo, not large enough to hold either
an RDF tone or a regular AltOS telemetry packet.
This also renames the public API for sending APRS packets from
ao_radio_send_lots to ao_radio_send_aprs, which is at least more
accurate. The workings of that API haven't changed, just the name.
Signed-off-by: Keith Packard <keithp@keithp.com>
Diffstat (limited to 'src/telegps-v0.1/ao_pins.h')
| -rw-r--r-- | src/telegps-v0.1/ao_pins.h | 16 |
1 files changed, 6 insertions, 10 deletions
diff --git a/src/telegps-v0.1/ao_pins.h b/src/telegps-v0.1/ao_pins.h index 09574568..eea050c9 100644 --- a/src/telegps-v0.1/ao_pins.h +++ b/src/telegps-v0.1/ao_pins.h @@ -140,17 +140,13 @@ #define AO_CC115L_SPI_BUS AO_SPI_2_PB13_PB14_PB15 #define AO_CC115L_SPI stm_spi2 -#define AO_CC115L_INT_PORT (&stm_gpioa) -#define AO_CC115L_INT_PIN (9) +#define AO_CC115L_FIFO_INT_GPIO_IOCFG CC115L_IOCFG2 +#define AO_CC115L_FIFO_INT_PORT (&stm_gpioa) +#define AO_CC115L_FIFO_INT_PIN (9) -#define AO_CC115L_MCU_WAKEUP_PORT (&stm_gpioa) -#define AO_CC115L_MCU_WAKEUP_PIN (10) - -#define AO_CC115L_INT_GPIO 2 -#define AO_CC115L_INT_GPIO_IOCFG CC115L_IOCFG2 - -#define AO_CC115L_MARC_GPIO 0 -#define AO_CC115L_MARC_GPIO_IOCFG CC115L_IOCFG0 +#define AO_CC115L_DONE_INT_GPIO_IOCFG CC115L_IOCFG0 +#define AO_CC115L_DONE_INT_PORT (&stm_gpioa) +#define AO_CC115L_DONE_INT_PIN (10) #define HAS_RADIO_AMP 1 |