altos: Use TeleMetrum v1.9 board for MegaDongle experiments

This configures the MegaDongle v0.1 directory to use the pin
assignments in TeleMetrum v1.9 boards.

Signed-off-by: Keith Packard <keithp@keithp.com>

3 files changed, 23 insertions, 31 deletions

diff --git a/src/megadongle-v0.1/Makefile b/src/megadongle-v0.1/Makefile
index ade8e496..bbe2ea58 100644
--- a/src/megadongle-v0.1/Makefile
+++ b/src/megadongle-v0.1/Makefile
@@ -53,6 +53,7 @@ ALTOS_SRC = \
 	ao_rssi.c \
 	ao_send_packet.c \
 	ao_packet_master.c \
+	ao_eeprom_stm.c \
 	ao_packet.c
 
 PRODUCT=MegaDongle-v0.1
diff --git a/src/megadongle-v0.1/ao_megadongle.c b/src/megadongle-v0.1/ao_megadongle.c
index 2792af22..68d6de60 100644
--- a/src/megadongle-v0.1/ao_megadongle.c
+++ b/src/megadongle-v0.1/ao_megadongle.c
@@ -24,7 +24,7 @@ int
 main(void)
 {
 	ao_clock_init();
-	
+
 #if HAS_STACK_GUARD
 	ao_mpu_init();
 #endif
@@ -48,7 +48,7 @@ main(void)
 	ao_send_packet_init();
 
 	ao_config_init();
-	
+
 	ao_start_scheduler();
 	return 0;
 }
diff --git a/src/megadongle-v0.1/ao_pins.h b/src/megadongle-v0.1/ao_pins.h
index d460a490..9edd91f4 100644
--- a/src/megadongle-v0.1/ao_pins.h
+++ b/src/megadongle-v0.1/ao_pins.h
@@ -15,6 +15,8 @@
  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  */
 
+/* Using TeleMetrum v1.9 board */
+
 #ifndef _AO_PINS_H_
 #define _AO_PINS_H_
 
@@ -46,7 +48,7 @@
 #define HAS_SERIAL_1		0
 #define USE_SERIAL_1_STDIN	0
 #define SERIAL_1_PB6_PB7	0
-#define SERIAL_1_PA9_PA10	1
+#define SERIAL_1_PA9_PA10	0
 
 #define HAS_SERIAL_2		0
 #define USE_SERIAL_2_STDIN	0
@@ -56,19 +58,18 @@
 #define HAS_SERIAL_3		0
 #define USE_SERIAL_3_STDIN	0
 #define SERIAL_3_PB10_PB11	0
-#define SERIAL_3_PC10_PC11	1
+#define SERIAL_3_PC10_PC11	0
 #define SERIAL_3_PD8_PD9	0
 
-#define ao_gps_getchar		ao_serial3_getchar
-#define ao_gps_putchar		ao_serial3_putchar
-#define ao_gps_set_speed	ao_serial3_set_speed
-
-#define HAS_EEPROM		0
-#define USE_INTERNAL_FLASH	0
+#define HAS_EEPROM		1
+#define USE_INTERNAL_FLASH	1
+#define USE_STORAGE_CONFIG	0
+#define USE_EEPROM_CONFIG	1
 #define HAS_USB			1
 #define HAS_BEEP		0
 #define HAS_RADIO		1
 #define HAS_TELEMETRY		0
+#define HAS_RSSI		1
 
 #define HAS_SPI_1		0
 #define SPI_1_PA5_PA6_PA7	0	/* Barometer */
@@ -76,7 +77,7 @@
 #define SPI_1_PE13_PE14_PE15	0	/* Accelerometer */
 
 #define HAS_SPI_2		1
-#define SPI_2_PB13_PB14_PB15	1	/* Flash, Companion */
+#define SPI_2_PB13_PB14_PB15	1	/* Radio */
 #define SPI_2_PD1_PD3_PD4	0
 #define SPI_2_OSPEEDR		STM_OSPEEDR_10MHz
 
@@ -85,27 +86,17 @@
 #define SPI_2_MISO_PIN		14
 #define SPI_2_MOSI_PIN		15
 
-#define HAS_I2C_1		0
-#define I2C_1_PB8_PB9		1
-
-#define HAS_I2C_2		0
-#define I2C_2_PB10_PB11		1
-
 #define PACKET_HAS_SLAVE	0
 #define PACKET_HAS_MASTER	1
 
 #define LOW_LEVEL_DEBUG		0
 
-#define LED_PORT_0_ENABLE	STM_RCC_AHBENR_GPIOAEN
-#define LED_PORT_1_ENABLE	STM_RCC_AHBENR_GPIOBEN
-#define LED_PORT_0		(&stm_gpioa)
-#define LED_PORT_0_MASK		(0xff)
+#define LED_PORT_0_ENABLE	STM_RCC_AHBENR_GPIOCEN
+#define LED_PORT_0		(&stm_gpioc)
+#define LED_PORT_0_MASK		(0xffff)
 #define LED_PORT_0_SHIFT	0
-#define LED_PORT_1_MASK		(0xff00)
-#define LED_PORT_1_SHIFT	0
-#define LED_PORT_1		(&stm_gpiob)
-#define LED_PIN_RED		1
-#define LED_PIN_GREEN		12
+#define LED_PIN_RED		14
+#define LED_PIN_GREEN		15
 #define AO_LED_RED		(1 << LED_PIN_RED)
 #define AO_LED_GREEN		(1 << LED_PIN_GREEN)
 
@@ -134,15 +125,15 @@
 
 #define AO_FEC_DEBUG		0
 #define AO_CC1120_SPI_CS_PORT	(&stm_gpioa)
-#define AO_CC1120_SPI_CS_PIN	0
+#define AO_CC1120_SPI_CS_PIN	2
 #define AO_CC1120_SPI_BUS	AO_SPI_2_PB13_PB14_PB15
 #define AO_CC1120_SPI		stm_spi2
 
-#define AO_CC1120_INT_PORT	(&stm_gpioc)
-#define AO_CC1120_INT_PIN	13
+#define AO_CC1120_INT_PORT	(&stm_gpioa)
+#define AO_CC1120_INT_PIN	3
 
-#define AO_CC1120_MCU_WAKEUP_PORT	(&stm_gpioc)
-#define AO_CC1120_MCU_WAKEUP_PIN	(0)
+#define AO_CC1120_MCU_WAKEUP_PORT	(&stm_gpioa)
+#define AO_CC1120_MCU_WAKEUP_PIN	(4)
 
 #define AO_CC1120_INT_GPIO	2
 #define AO_CC1120_INT_GPIO_IOCFG	CC1120_IOCFG2