altos: Add support for multiple SPI busses and sharing device drivers

The STM32L151 has several SPI busses, and we want to use more than
one, so add a 'bus' parameter to the SPI interfaces. To avoid wasting
time on AVR and CC1111 processors which only use one SPI bus, elide
those parameters from the actual functions by wrapping them with
macros.

Configuring chip select is now all macroized so that each chip can
have its own version, allowing the STM to share the various SPI device
drivers with the cc1111 and avr processors. Note that only the M25
driver has been ported; porting the others is 'trivial', but not
necessary at this point.

Signed-off-by: Keith Packard <keithp@keithp.com>

1 files changed, 15 insertions, 6 deletions

diff --git a/src/cc1111/ao_arch_funcs.h b/src/cc1111/ao_arch_funcs.h
index 9ad14fbb..d9f5955a 100644
--- a/src/cc1111/ao_arch_funcs.h
+++ b/src/cc1111/ao_arch_funcs.h
@@ -21,26 +21,27 @@
 
 extern __xdata uint8_t	ao_spi_mutex;
 
-#define ao_spi_get_mask(reg,mask) do {\
+#define ao_spi_get_mask(reg,mask,bus) do {		\
 	ao_mutex_get(&ao_spi_mutex); \
 	(reg) &= ~(mask); \
 	} while (0)
 
-#define ao_spi_put_mask(reg,mask) do { \
+#define ao_spi_put_mask(reg,mask,bus) do {		\
 	(reg) |= (mask); \
 	ao_mutex_put(&ao_spi_mutex); \
 	} while (0)
 
-#define ao_spi_get_bit(bit) do {\
+#define ao_spi_get_bit(bit,bus) do {    \
 	ao_mutex_get(&ao_spi_mutex); \
 	(bit) = 0; \
 	} while (0)
 
-#define ao_spi_put_bit(bit) do { \
+#define ao_spi_put_bit(bit,bus) do {		\
 	(bit) = 1; \
 	ao_mutex_put(&ao_spi_mutex); \
 	} while (0)
 
+
 /*
  * The SPI mutex must be held to call either of these
  * functions -- this mutex covers the entire SPI operation,
@@ -48,11 +49,19 @@ extern __xdata uint8_t	ao_spi_mutex;
  */
 
 void
-ao_spi_send(void __xdata *block, uint16_t len) __reentrant;
+ao_spi_send_bus(void __xdata *block, uint16_t len) __reentrant;
 
 void
-ao_spi_recv(void __xdata *block, uint16_t len) __reentrant;
+ao_spi_recv_bus(void __xdata *block, uint16_t len) __reentrant;
+
+#define ao_spi_send(block, len, bus) ao_spi_send_bus(block, len)
+#define ao_spi_recv(block, len, bus) ao_spi_recv_bus(block, len)
 
 void
 ao_spi_init(void);
 
+#define ao_spi_init_cs(port, mask) do {		\
+		SPI_CS_PORT |= mask;		\
+		SPI_CS_DIR |= mask;		\
+		SPI_CS_SEL &= ~mask;		\
+	} while (0)