doc: Update for 1.8.7

Release notes
Add HW specs for EasyMini v2.0 and TeleMega v3.0

Signed-off-by: Keith Packard <keithp@keithp.com>

6 files changed, 78 insertions, 1 deletions

diff --git a/doc/Makefile b/doc/Makefile
index f460a2ff..5e175cbe 100644
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -3,6 +3,7 @@
 #
 
 RELNOTES_INC=\
+	release-notes-1.8.7.inc \
 	release-notes-1.8.6.inc \
 	release-notes-1.8.5.inc \
 	release-notes-1.8.4.inc \
diff --git a/doc/altusmetrum-docinfo.xml b/doc/altusmetrum-docinfo.xml
index 7b696b97..2f8b69fb 100644
--- a/doc/altusmetrum-docinfo.xml
+++ b/doc/altusmetrum-docinfo.xml
@@ -47,6 +47,14 @@
 <revhistory>
   <?dbhtml filename="altusmetrum-revhistory.html"?>
   <revision>
+    <revnumber>1.8.7</revnumber>
+    <date>6 Oct  2018</date>
+    <revremark>
+      Include TeleMega v3.0 firmware in release. Fix TeleBT v4.0 RF
+      calibration to factory value when reflashing.
+    </revremark>
+  </revision>
+  <revision>
     <revnumber>1.8.6</revnumber>
     <date>6 Aug 2018</date>
     <revremark>
diff --git a/doc/micropeak-docinfo.xml b/doc/micropeak-docinfo.xml
index 37c6e770..f4d9eaff 100644
--- a/doc/micropeak-docinfo.xml
+++ b/doc/micropeak-docinfo.xml
@@ -5,7 +5,7 @@
   <email>keithp@keithp.com</email>
 </author>
 <copyright>
-  <year>2014</year>
+  <year>2018</year>
   <holder>Keith Packard</holder>
 </copyright>
 <mediaobject>
@@ -32,6 +32,20 @@
 <revhistory>
   <?dbhtml filename="micropeak-revhistory.html"?>
   <revision>
+    <revnumber>1.8.7</revnumber>
+    <date>6 October 2018</date>
+    <revremark>
+      Poll for MicroPeak USB while the device dialog is open.
+    </revremark>
+  </revision>
+  <revision>
+    <revnumber>1.8.6</revnumber>
+    <date>6 August 2018</date>
+    <revremark>
+      Report altimeter-recorded maximum height value
+    </revremark>
+  </revision>
+  <revision>
     <revnumber>1.3.2</revnumber>
     <date>12 February 2014</date>
     <revremark>
diff --git a/doc/release-notes-1.8.7.inc b/doc/release-notes-1.8.7.inc
new file mode 100644
index 00000000..e6837232
--- /dev/null
+++ b/doc/release-notes-1.8.7.inc
@@ -0,0 +1,32 @@
+= Release Notes for Version 1.8.7
+:toc!:
+:doctype: article
+
+	Version 1.8.7
+
+	== AltOS
+
+	* Include TeleMega v3.0 firmware
+	
+	== AltosUI, TeleGPS
+
+	* Poll for new devices while Device dialog is displayed
+
+	* Wait for device to re-appear when flashing new firmware
+
+	* Fetch correct TeleBT v4.0 RF calibration values from web
+          site when reflashing.
+
+	* Change gyro headings in .csv files from x/y/z to
+          roll/pitch/yaw
+
+	* Add documentation about Packet Link mode
+
+	* Add documentation about forcing TeleMini RF parameters to
+          known values.
+
+	== MicroPeak
+
+	* Poll for new devices while Device dialog is displayed
+
+	
diff --git a/doc/release-notes.inc b/doc/release-notes.inc
index 693699df..1183fd12 100644
--- a/doc/release-notes.inc
+++ b/doc/release-notes.inc
@@ -1,6 +1,10 @@
 [appendix]
 == Release Notes
 	:leveloffset: 2
+	include::release-notes-1.8.7.raw[]
+
+	<<<<
+	:leveloffset: 2
 	include::release-notes-1.8.6.raw[]
 
 	<<<<
diff --git a/doc/specs.inc b/doc/specs.inc
index f09d6fc9..430c8789 100644
--- a/doc/specs.inc
+++ b/doc/specs.inc
@@ -76,6 +76,15 @@
 	|1MB
 	|-
 	|3.7-12V
+
+	|EasyMini v2.0
+	|MS5607 30km (100k')
+	|-
+	|-
+	|-
+	|1MB
+	|-
+	|3.7-12V
 	endif::easymini[]
 
 	ifdef::telemega[]
@@ -96,6 +105,15 @@
 	|8MB
 	|40mW
 	|3.7V
+
+	|TeleMega v3.0
+	|MS5607 30km (100k')
+	|ADXL375 200g
+	|uBlox Max-7Q
+	|MPU9250
+	|8MB
+	|40mW
+	|3.7V
 	endif::telemega[]
 
 	ifdef::easymega[]