diff options
| author | Keith Packard <keithp@keithp.com> | 2014-06-16 11:02:49 -0700 |
|---|---|---|
| committer | Keith Packard <keithp@keithp.com> | 2014-06-16 11:02:49 -0700 |
| commit | 31beeb0882d27cbc05e28118611feec4ae43d9da (patch) | |
| tree | 03b98717db10d7586ff9bc2cdd3e5c5319d7dddc /doc | |
| parent | f167d348b147e89d269ad35806e39f28cf104afb (diff) | |
doc: Add instructions for flash recovery technique
The flash recovery section explained which pins to connect, but lacked
explicit instructions on how to make it work.
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/altusmetrum.xsl | 44 |
1 files changed, 44 insertions, 0 deletions
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl index 5ccbee9f..fb8fe7e1 100644 --- a/doc/altusmetrum.xsl +++ b/doc/altusmetrum.xsl @@ -4347,6 +4347,50 @@ NAR #88757, TRA #12200 </listitem> </varlistentry> </variablelist> + <para> + Once you've located the right pins: + </para> + <orderedlist inheritnum='inherit' numeration='arabic'> + <listitem> + <para> + Turn the altimeter power off. + </para> + </listitem> + <listitem> + <para> + Connect a battery. + </para> + </listitem> + <listitem> + <para> + Connect the indicated terminals together with a short + piece of wire. Take care not to accidentally connect + anything else. + </para> + </listitem> + <listitem> + <para> + Connect USB + </para> + </listitem> + <listitem> + <para> + Turn the board power on. + </para> + </listitem> + <listitem> + <para> + The board should now be visible over USB as 'AltosFlash' + and be ready to receive firmware. + </para> + </listitem> + <listitem> + <para> + Once the board has been powered up, you can remove the + piece of wire. + </para> + </listitem> + </orderedlist> </section> </section> <section> |