diff options
| author | Bdale Garbee <bdale@gag.com> | 2016-01-10 18:29:07 -0700 |
|---|---|---|
| committer | Bdale Garbee <bdale@gag.com> | 2016-01-10 18:29:07 -0700 |
| commit | cbec66452ecd01bbd5aebf6f98443d5e0540f5d2 (patch) | |
| tree | f023225adb9f040d90ceb4a575651aa7804fb91d /doc/telemega.inc | |
| parent | 4043e0707cdc77158f709c19dd134f92b4604270 (diff) | |
| parent | 81b8f4da612b527915f68f632fbd94a46bc1795f (diff) | |
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Diffstat (limited to 'doc/telemega.inc')
| -rw-r--r-- | doc/telemega.inc | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/doc/telemega.inc b/doc/telemega.inc index 4383f228..55f77bc4 100644 --- a/doc/telemega.inc +++ b/doc/telemega.inc @@ -9,6 +9,18 @@ the board is aligned with the flight axis. It can be mounted either antenna up or down. + TeleMega v2.0 has a few minor changes from v1.0: + + * Companion connector matches EasyMega functions + * Serial port connector replaced with servo connector with + support for up to 4 PWM channels. + * Radio switched from cc1120 to cc1200. + + None of these affect operation using the stock firmware, but + they do mean that the device needs different firmware to + operate correctly, so make sure you load the right firmware + when reflashing the device. + === TeleMega Screw Terminals TeleMega has two sets of nine screw terminals on the end of |