Merge branch 'master' into branch-1.6

1 files changed, 23 insertions, 0 deletions

diff --git a/doc/telegps-quick-start.inc b/doc/telegps-quick-start.inc
new file mode 100644
index 00000000..6492743d
--- /dev/null
+++ b/doc/telegps-quick-start.inc
@@ -0,0 +1,23 @@
+== TeleGPS Quick Start Guide
+
+	TeleGPS is designed to be easy to use. Requiring no external
+	components, flying takes just a few steps.
+
+	1. First, download and install the software from
+	http://altusmetrum.org/AltOS. This will make sure that
+	you have the right device drivers installed.
+
+	2. Next, plug in the battery and USB cable and connect TeleGPS to
+	your computer. This will charge the battery and allow you to
+	configure the device.
+
+	3. Start the TeleGPS application and set the callsign and frequency
+	on your TeleGPS device; refer to <<_configure_device>> for instructions.
+
+	4. Unplug TeleGPS when the battery charger light goes green. This
+	will enable the radio and logging portions of the TeleGPS
+	firmware.
+
+	5. Connect TeleDongle to your computer and start TeleGPS or start
+	AltosDroid on your android device and connect to TeleBT. Set the
+	frequency to match the TeleGPS and you should be receiving telemetry.