doc: Finish converting docs to asciidoc format

Signed-off-by: Keith Packard <keithp@keithp.com>

1 files changed, 0 insertions, 204 deletions

diff --git a/doc/release-notes-1.4.xsl b/doc/release-notes-1.4.xsl
deleted file mode 100644
index 2893f1aa..00000000
--- a/doc/release-notes-1.4.xsl
+++ /dev/null
@@ -1,204 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
-"/usr/share/xml/docbook/schema/dtd/4.5/docbookx.dtd">
-
-<article>
-  <para>
-    Version 1.4 is a major release. It includes support for our new
-    TeleGPS product, new features and bug fixes in in the flight
-    software for all our boards and the AltosUI ground station
-  </para>
-  <para>
-    AltOS New Features
-    <itemizedlist>
-      <listitem>
-	<para>
-	  Add support for TeleGPS boards.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Replace the 'dit dit dit' tones at startup with the current
-	  battery voltage, measured in tenths of a volt. This lets you
-	  check the battery voltage without needing telemetry, which
-	  is especially useful on EasyMini.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Change state beeping to "Farnsworth spacing", which means
-	  they're quite a bit faster than before, and so they take
-	  less time to send.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Make the beeper tone configurable, making it possible to
-	  distinguish between two Altus Metrum products in the same ebay.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Make the firing time for extra pyro channels configurable,
-	  allowing longer (or shorter) than the default 50ms.  Only relevant
-	  for TeleMega at this time.
-	</para>
-      </listitem>
-    </itemizedlist>
-  </para>
-  <para>
-    AltOS Fixes
-    <itemizedlist>
-      <listitem>
-	<para>
-	  Fix bug preventing the selection of the 'Flight State After'
-	  mode in pyro configuration.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Fix bug where erasing flights would reset the flight number
-	  to 2 on TeleMega and TeleMetrum v2.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Fix u-Blox GPS driver to mark course and speed data as being
-	  present.
-	</para>
-      </listitem>
-    </itemizedlist>
-  </para>
-  <para>
-    AltosUI New Features
-    <itemizedlist>
-      <listitem>
-	<para>
-	  Add zooming and new content types (terrain and road maps) to
-	  map view. Change map storage format from PNG to Jpeg, which
-	  saves a huge amount of disk space. You will need to
-	  re-download all of your pre-loaded map images.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Add a distance measuring device to the maps view. Select
-	  this by using any button other than the left one, or by
-	  pressing shift or control on the keyboard while using the
-	  left button.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Add new 'Ignitor' tab to the flight monitor display for
-	  TeleMega's extra ignitors.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Increase the width of data lines in the graphs to make them
-	  easier to read.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Add additional ignitor firing marks and voltages to the
-	  graph so you can see when the ignitors fired, along with
-	  the ignitor voltages.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Add GPS course, ground speed and climb rate as optional
-	  graph elements.
-	</para>
-      </listitem>
-    </itemizedlist>
-  </para>
-  <para>
-    AltosUI Fixes
-    <itemizedlist>
-      <listitem>
-	<para>
-	  When flashing new firmware, re-try opening the device as
-	  sometimes it takes a while for the underlying operating
-	  system to recognize that the device has rebooted in
-	  preparation for the flashing operation.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Hide Tilt Angle in ascent tab for devices that don't have a gyro.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Filter out speed and acceleration spikes caused by ejection
-	  charge firing when computing the maximum values. This
-	  provides a more accurate reading of those maximums.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Fix EasyMini voltage displays. Early EasyMini prototypes
-	  used a 3.0V regulator, and AltosUI still used that value as
-	  the basis of the computation. Production EasyMini boards
-	  have always shipped with a 3.3V regulator. Also, purple
-	  EasyMini boards sensed the battery voltage past the blocking
-	  diode, resulting in a drop of about 150mV from the true
-	  battery voltage. Compensate for that when displaying the
-	  value.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Display error message when trying to configure maximum
-	  flight log size while the flight computer still has flight
-	  data stored.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Handle TeleMetrum and TeleMini eeprom files generated with
-	  pre-1.0 firmware. Those ancient versions didn't report the
-	  log format, so just use the product name instead.
-	</para>
-      </listitem>
-    </itemizedlist>
-  </para>
-  <para>
-    TeleGPS Application
-    <itemizedlist>
-      <listitem>
-	<para>
-	  New application designed for use with TeleGPS boards.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Shares code with AltosUI, mostly just trimmed down to focus
-	  on TeleGPS-related functions.
-	</para>
-      </listitem>
-    </itemizedlist>
-  </para>
-  <para>
-    Documentation changes
-    <itemizedlist>
-      <listitem>
-	<para>
-	  Re-create the drill template images; they should print
-	  correctly from Firefox at least. Ship these as individual
-	  PDF files so they're easy to print.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	  Add a description of the 'Apogee Lockout' setting, which
-	  prevents the apogee charge from firing for a configurable
-	  amount of time after boost.
-	</para>
-      </listitem>
-    </itemizedlist>
-  </para>
-</article>